Question about Nokia N73 Cellular Phone

1 Answer

N73i main camera not working.......updated the firmware, did a hard reset but still to no avail.........helppppppp

Posted by on

  • devuhemu May 20, 2009

    my main camera not work in N73 when i turn on to main camera just white screen came on

  • Anonymous May 26, 2009

    after camera slide only options come for camera but screen dark

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try this remove the back cover of the n73 and when u remove it u will see 2 small golden slim kinda plastic chip clean that and clean the 2 small golden antena's that looks like 2 small very small sticks clean it when ur done put back the cover restart ur phone w8 for ur phone to wake up slide the cover to open the camera and check it out it worked for mine too if it dosent work something's wrong with the 2 small antena's if  u cant solv that problem go back to the same shop u bought ur phone and tell them to check it out if they cant find out tell them u want a nother nokian73 and try it out then thats it! :P

Posted on Sep 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am not getting a signal on my television, I have tried turning all switches off to no avail.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Dec 24, 2016 | Televison & Video

1 Answer

Tv just automatically started scanning and stopped on no video available now remote don't work and tv automatically stays blank with that message across screen


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Sep 07, 2016 | Televison & Video

1 Answer

Sharp lc15av1u tuns off its self in 2,3 seconds


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Sep 02, 2016 | Sharp Cameras

1 Answer

MyTV is displaying no signal I have tried rebooting to no avail


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Jun 17, 2016 | Televison & Video

1 Answer

Update firmware


There is no update for the DMC-LZ2 available If Panasonic has new firmware for any camera, it will contact all registered owners and tell where and how to get and install the update.
Be aware, you only can update a correct working camera. There is no way to update a camera that does not function for 100%

Jan 22, 2014 | Panasonic Lumix DMC-LZ2 Digital Camera

1 Answer

Sony dslr-a230 no power after firmware update.


a firmware update error appears to have trashed your main circuit. usually this requires replacement of the circuit and initialization of the new circuit and downloading of data for it will work, which requires software not available from Sony. I am afraid from what you say this sounds like a factory repair - though I would argue with them that you did everything right and they ought to fix it for free

May 31, 2012 | Sony Alpha DSLR-A230 Digital Camera

1 Answer

Nokia N86 crazy screen colours.


Release in early 2009, I like the camera and the inbuilt memory of this phone. Firmware updates are always available and you certainly can try a software update. Nokia stopped N-gage for this phone now. If you really think its not a hardware (display) problem, and the update is not helpful, you can try to reset the phone to factory setting. The code is *#7780# for soft reset and *#7370# for hard reset. During reset it will ask for password, the default password is 12345.

Dec 02, 2011 | Cell Phones

1 Answer

Downloaded and installed Bluetooth firmware update - Won't Pair


I recommend rerunning the webupdate software available below, which was updated March 30, 2010. Run through the update steps again.

  1. Back up your Favorites.
  2. Perform a Hard Reset.
  3. Download and then run Garmin 265WT WebUpdater to replace its firmware / system software.
After successful webupdating, a hard reset is often helpful at this time, too.

I hope that helps.
_____________________________
Nuvi 265WT Manuals here.

Sep 09, 2009 | Garmin nuvi 265 Car GPS Receiver

1 Answer

Cant download photos


Hello, welcome to FixYa.com, where an abundance of eager helpers await to help you find solutions to your problems. A preliminary glance at your problem suggests that the driver is missing from your computer which helps identify the camera. If you can reinstall the software at this website, your computer will then know about the camera when it is connected.
http://www.olympusamerica.com/cpg_section/product.asp?product=1314&fl=15
Also, here are some more tips:
Are any firmware updates available for my camera?
Use the Update Camera function in the OLYMPUS Master 2 software packaged with your digital camera to find out whether firmware updates are available for your model. An Internet connection is required to perform the operation.
For detailed instructions on how to update the camera's firmware, click here.
Note: If multiple firmware updates are available for your model, it may not always be possible to update directly from the current firmware version in your camera to the latest available version. In such cases, updates must be applied in stages. For this reason, it is recommended that, after updating the camera firmware, you immediately check again for additional updates. Simply repeat the update procedure to apply subsequent updates.

but_up.gif How can I download images and movies from the camera to a computer?
Complete instructions may be downloaded by clicking here.
Adobe Reader® software is required to view the file. It is available as a free download from Adobe's web site. Click here to download the latest version.

Sep 28, 2008 | Olympus Stylus 790SW Digital Camera

1 Answer

Sometimes my phone is freezing (no one button work)


Your Phone Firmware is unstable. You may need a hard reset or reflash a new firmware by run an update. The update is available in www.sony-ericsson.com web site. Email me at joe_dao2003@yahoo.com, I will guide you to where you can do this job.

Mar 06, 2008 | Sony Ericsson K750i Cellular Phone

Not finding what you are looking for?
Nokia N73 Cellular Phone Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...