Question about Samsung SyncMaster 910MP 19" LCD Monitor

1 Answer

Light Hey there, If i turn my screen of by the button it doesnt come back on at all, So i have to unplug the power cable and leave it for 20-40mins, Then plug it in for it to work, This means i cant turn my pc of and then deside to go on it like 10 mins later, My pc is on 24/7 and sometimes it just shuts its self off and wont come back on unless i unplug the power and leave for 20-40mins onces it took 3 hours i was livid, when the screen goes black the green light doesnt even light up, and im not sure if its still under warentee but i recently moved to australia although the screen done this befor, im not sure if they can repair or replace with me beenin here, looking forward to a reply thankyou Terry.

Posted by on

  • tmf0967 Sep 30, 2008

    When my monitor goes off when the comuter is shut down, it does not come back on when the computer is powered up. Pressing the on/off button doesn't work at all. I have to unplug the monitor,let is sit for a while and then plug it back in and it will come on. Sometimes I have to do this a couple times before it actually will come back on. Also the color on the TV has completely gone out. The picture is only in black and white. I did ;love this monitor at one time, now I'm ready to toss it with the rest of the trash.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 188 Answers

I don't know Samsung's warranty policy for Australia so I'd email them right away. It could be an input voltage problem. It could be heating up components in your equipment causing it to shut down and reset when it cools off. As the green light is not even coming on may be an indiction of this. So I'm guessing you are currently shortening the life of your equipment. Rich

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why did my computer monitor stop showing an image?


Disconnect it from computer and power. wait 15 minutes and plug only the power back in, press the power on button. The monitor may display a message that there is no signal or something like that. If that happens the problem is either the cable or the computer. If you get no message then look for the menu button and press it to see if any thing appears. If not find the manual on line and read it. Many times monitors get over-driven by computers to the point that they can't display OR they self destruct.


OR

Another way is to just unplug everything computer and monitor for 15 minutes. Plug in monitor first then plug in computer and press the power button, the display should display the booting information if the cable is good and the monitor is good.

Jul 19, 2014 | ViewSonic Computer Monitors

2 Answers

HP LP3065 monitor turns off and won't turn back on; is this a Windows problem


It doesnt sound like a windows problem. A simple test for this is to unplug the vga or hdmi cable from the monitor then turn it on if it has power it should say no signal. Also try either another power cable to the monitor or change the fuse. Hope this helps.

Oct 19, 2012 | HP LP3065 Monitor

1 Answer

The moniter blacked out, blue light is saying the moniter is still on, but screen looks like there is no power. When you turn on the moniter, the screen shows up for a few seconds, then blacks out again!...


Unplug power. Unplug VGA cable. Remove back of monitor. (four small Philips headed screws along the bottom rear. Remove screws attaching Monitor to it's base. Carefully, lean the screen away from back of case. Gently unplug 25 pin cable from the screen.
Connect AC power.
Screen should power on Gray to White. Ble light comes on Blue.Flickers then changes to Amber.
Reconnect VGA cable. Monitor should work.
Close up the monitor in reverse order to opening it.
If these steps don't solve your monitor, consider replacing as cost of repairs may shock you.

Sep 09, 2010 | Proview PL926WBi 19" LCD Monitor

1 Answer

Basically i've broke my monitor buttons and was wondering if there's a way to remove the 'brightness' settings without having to press the monitor buttons, as it is constantly on my screen. thankss.


unplug remove screws take out the little white plug from by switches ...put case back on leave the white plug OUT fixed but no power light or buttons display works fine

Apr 04, 2010 | Samsung Syncmaster 17" 720N Monitor

2 Answers

Gateway Monitor Power Supply Problem


I have the same problem. I just unplug it and reconnect. The display comes back. I have no idea why this is happening.

H

Jun 25, 2009 | Computer Monitors

1 Answer

LG Flatron - Power button flashing blue


i get a similar thing, i accidently entered sleep mode then turned off my computer at the power button on the back, now i turn on my monitor( i dont get blue flasjhing but it jsut goes on and it doesnt register, then says going into power saving mode and the colour on the button turns yellow its very frustrating :(

Apr 20, 2009 | Computer Monitors

3 Answers

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one of the following 2 methods should reset it to a normal state. This reset generally requires both hands and it is sometimes easier with another person.

If the serial number begins with an A and/or your power button on the far right (5th button from left):
Method #1
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 3 down at the same time (see picture above) and while continuing to hold the buttons, plug the power cable back in.
4. Keep holding the buttons for 5 seconds after the power has been plugged in and then let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.
Method #2
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 3 down at the same time (see picture above) and while continuing to hold the buttons, plug the power cable back in.
4. Keep holding the buttons until the 4th green LED blink; then, let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.


If the serial number begins with a B and/or your power button is in the middle (3rd button from left):
Method #1
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 4 down at the same time (see attached picture) and while continuing to hold the buttons, plug the power cable back in.4. Keep holding the buttons for 5 seconds after the power has been plugged in and then let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.

Method #2
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 4 down at the same time (see picture above) and while continuing to hold the buttons, plug the power cable back in.
4. Keep holding the buttons until the 4th green LED blink; then, let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.

If you have tried the reset a few times and it does not solve your issue, please Ask a Question to submit a request through the system or call 1-866-752-6271 Option 1 to contact technical support.

Mar 02, 2009 | Planar PL1910M (Black) 19 in. Flat Panel...

2 Answers

Sampo Flat Screen Black unless unplug and plug back in


i had the same problem now my monitor wont even turn on if i do that the power light just keeps blinking maybe its a sign of a dying monitor

Jan 16, 2009 | Sampo PD-70 15" Flat Panel LCD Monitor

1 Answer

Cornea flatscreen mp704 monitor


i have a similar problem i believe the power button on the monitor is faulty,sometimes it works sometimes it doesnt.what works for me is to hold the button until the monitor comes on and release the button quickly.
good luck.

Dec 26, 2007 | Cornea MP800 18.1 in. Flat Panel LCD...

5 Answers

Sceptre X7g Monitor Flashing Red & Blue Lights. Blank Screen


i fixed this problem by unplugging the monitor, unplugging the video cables. Then hold down the power button while plugging it back in. Release power button and then press power button for on. It worked then. I got the icon for no signal, i plugged back in my monitors. Sceptre X9W

Sep 11, 2007 | Sceptre X7GNAGAV 17" LCD Monitor

Not finding what you are looking for?
Samsung SyncMaster 910MP 19" LCD Monitor Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computer Monitors Experts

Rugeshan Lanka
Rugeshan Lanka

Level 1 Expert

15 Answers

Pieter Vleeshouwers

Level 3 Expert

1416 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Samsung Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...