Question about Harley Davidson Harley-Davidson Motorcycle Desktop Telephone

1 Answer

2000 flhtcui broken tour pak radio antenna stud replacement

How or can I get the stud out of the wraparound antenna mount on my 2000 ultra classic without removing the complete assembly, thanks Allen

Posted by on

  • Dumguy Jan 19, 2009

    I want to know the same thing except on a 2007.


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 42 Answers

The stud is held in place by the cable jack. unscrew the jack from the back of the assy inside the pack under the liner. The stud should just slip out. You do not have to remove the entire light assy to do this. Just the part the cable screws onto.

Posted on Aug 10, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Sony spp a967 antenna is broken

Mar 23, 2013 | Sony Lands Phones

1 Answer

Siemens a240 gigaset

please change the batteries first,
2) if the problem persist, see if the antenna is broken. you need replace, since the antenna pick up the signals.
3) if does not resolve the problem, the phone is the problem, see the menu in your owner manual, and adjust the ring with volume respectively. Test again. If not work, the problem will be in the Syscon(Microcontroller) around circuit.go to the repair shop for fix it.

God bless you

Jul 22, 2012 | Siemens Gigaset C455 Cordless Phone

1 Answer

What does it mean when it says searching on my cordless phone

This usually indicates that the handset is having a problem establishing a wireless connection with the base unit.

Try placing the affected handset in the base charging cradle for a few seconds to let them sync to each other. Remove the handset and try again. If you are able to use the phone again, but only within a few feet of the base, there is probably an issue with the radio or antenna in the handset (assuming all other handset works fine). If all associated wireless handsets have the same scanning message and only work close to the base, then the problem is likely with the radio or antenna in the base, instead. You may be able to see a loose or broken connection if you wish to dig around - but if there's nothing obvious - you're probably better off leaving it alone and obtaining a replacement instead. Before beginning - be sure to unplug the AC power and telephone wire from the base and the remove the battery from the handsets.

Without a specific model number for your phone, only a generic solution can be provided. There may or may not be additional suggestions to help you solve the problem if you provide the Uniden model number.
Good luck!

Jan 09, 2012 | Uniden Cordless Phone

1 Answer

How to convert bis 10 desk set to a bis 10 wall set

Western Electric produced 2 different stands for "Classic Merlin" telephone sets. You will need to locate the stand designed for wall mounting. Such stands appear on eBay from time to time. Keep in mind that Classic Merlin telephone sets were discontinued many years ago so locating the correct base might be a bit of a challange.

Apr 11, 2011 | AT&T Merlin BIS 10 Phone

1 Answer

My antenna has broken off of the cordless handset of my phone.

if its warrenty still in effect or contact Uniden to ask them...thats my best bet ..

Apr 02, 2010 | Uniden Cordless Phone EXAI985

1 Answer

I want to switch factory reservoir with a chrome

torx srews 2 different sizes take your time ,some tiny screws in there and pay close att to wire placement undo brakeline remove srews holding leverclamp and remove assembly it is not neccessary to remove switch housing but they must be sepperated to remove the brake lever ***. note:bleeding the brakes takes lots of time and patience somtimesjust keep bleeding and it will come and make sure you use the right fluid for your year and model and also when you get to the otherside buy a book youll need it for clutch cable adjustment

Nov 11, 2009 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Headlight doesnt work 2000 Flstf

common problem, remove headlight and look for a broken ground wire in side the housing the motor company grouded it to a rivet comon fix is to drill a bolt in to a descreat location and install 2 nuts to make a good ground stud

Oct 17, 2008 | Harley Davidson Harley-Davidson Motorcycle...

Not finding what you are looking for?
Lands Phones Logo

571 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Lands Phones Experts


Level 3 Expert

98879 Answers

Brian Mathews

Level 1 Expert

20 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you a Harley Davidson Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides