THinkpad T41 with DWL-610 does not detect Network from D-Link 614+
The issue is only with wireless.
I found this problem comes and goes periodically.
No apparent pattern.
PC is sitting 2 feet away from Dlink router and DSL modem
I have shut off all potential interference sources such as wireless phones
Browsing through ethernet link is no problem however.
An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: THinkpad T41 with DWL-610 does not detect Network...
This article will tell you how to refresh your IP address on a network.
This will only repair internet connection problems if you've changed
locations and you can't connect to the Internet. This is only for
Open the Command Prompt (from the Start button, go to Programs > Accessories > Command Prompt).
In the command prompt window, type ipconfig /release
In the command prompt window, type ipconfig /renew
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. this error is not recognizable. But here is the D-link site for updating your firmware for the DI-614 this may resolve your issue. http://www.dlink.com/products/?pid=DI-614%2b 2. You also may want to check the status of you router by logging into it and checking the "status" page (192.168.0.1) User : admin No password unless specified This will tell you a lot as to what the router is doing and not doing.
Besides the DHCP/PPoE issue that cnavarro already said, I recommend you to check the interface metric, click on start, then on run, type cmd and click on ok
then in the black window type "netstat -r" that will tell you the metric of each interface according to each network destination, depending on what you see in there (like windows looking for a network trough another device) then just change the metric to 1 in your dwl520.
here is how to do it http://www.windowsreference.com/windows-2000/change-the-interface-metric-on-a-network-adapter/
You need to set up the wireless settings for your router, you can usually access it buy navigating your web browser to 192.168.0.1. If it asks for a username and password and you haven't set one, then type admin for the username and leave the password blank.
Below is the link for the quick install guide, page 4 starts to show you how to access the settings:
You need to disable the DHCP server on your "slave" wireless router ( the di-524 ). In D-link routers this might be called configuring it to be an "Access point".
When this happens, connecting to the second wireless router should cause your computer to obtain an IP address which is in the range of the first router (that is to say, it will use the first router's dhcp server).
You should be able have your laptop connect with an automatic IP address and have it work.