Question about Kodak Easyshare M753 Digital Camera

1 Answer

Lenz stuck out

My camera lenz is stuck out and I can't see anything on the camera it has a black screen error message then it goes blank please help it it worth fixing it are should I buy a new camera it's not even a year old yet.

Posted by on

  • Furry Pepper Oct 19, 2008

    I have the same problem. My camera fell off a shelf while the lens was out, now the lens is stuck and I can't take pictures or shut it off. Although, I can see the pictures and watch the videos I took before. When I'm on the camera mode, it goes all black. ...HELP!! 

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 74 Answers

If the lens mechanism has been damaged or is sticking from foreign material around the lens housing it will shut down when you try to power on. Once in a while you can try to assist the lens by placing gentle pressure against it when you power on and the lens may retract. This will most likely not fix the problem but it may give you a better idea if the mechanism is damaged or not.

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lenz are still


You should take it to the photo shop to ask for repair service, I guess it works! Impact from shock(fall) can misplace the components in the camera and it can't resolve by only turning on and off the camera.

Apr 24, 2013 | Fuji Film FinePix JX500 14 Megapixel...

3 Answers

Digital zoom error on an A600, lenz will not retract either


Have you tried spraying a can of compressed air into the lens assembly? All it takes is small piece of debris like a grain of sand to jam up the assembly.

Hope this helps

Jul 07, 2008 | Fuji FinePix A600 Digital Camera

1 Answer

I have a camcorder JVC GR-DX67EK which worked fine and suddenly as I started it up the message "Lenz Cap" came up (as it normally does). But this time, it didn't clear up as I removed the Lenz...


Look for a switch somewhere around the lens that is probably stuch triggering the OSD to display "Lens Cap". You may have to depress nthe switch with a toothpick or paperclip. Look at the lens cap for something sticking out of it. That would be the actuator. Line that up and you should then find the switch.

Mar 13, 2011 | Video Cameras

1 Answer

Nikon Coolpix S60 Lens Error Message


since you said you dropped the camera the lenz array might have cracked. try tapping the device while the message appears, if it works then you are a lucky one. in no you have to take it to the service centre to get it done. it costs about (50-60)$

Jul 29, 2009 | Nikon COOLPIX S60 Digital Camera

1 Answer

My sony camera gives this message and lenz will not close.


Hi,
    This message appears when the lens assembly start malffunctioning. Therefore, You have to replace the Lens Block Assy. For this plz contact any nearest Sony Service Centre nearby to u.
Thanks for using fixya!
Take care.

Mar 11, 2009 | Sony Cyber-Shot DSC-S90 Digital Camera

2 Answers

Lenz


Ok. Make sure that your camera lens is straight and not slanted. If it is then pull it out with pliers. Once you've done that, then take out your battery. The lens should still be out, but when you turn it on, the whole thing will restart and it will ask you the date and stuff. That's what happened to mine. It is now perfectly fine. I hope I helped.

Sep 16, 2008 | Kodak Easyshare M753 Digital Camera

1 Answer

Frozen camera


dont do anything. bring it to service center

Jul 14, 2008 | Sony Cyber-Shot DSC-P73 Digital Camera

2 Answers

Elura has gone dark


Call 1-800-828-4040.....there is a defective chip that needs to be replaced and Canon will fix it for free. They even sent me free shipping lables as well....

Dec 10, 2007 | Canon MV6iMC Mini DV Digital Camcorder

Not finding what you are looking for?
Kodak Easyshare M753 Digital Camera Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...