I lost the power cord for lexmark x4650 printer

Just Turn the Adapter On and donot have it connected to the printer for an hour, Touch the adapter and let me know if its WARM?

Please visit the Lexmark website to download and install the Lexmark X4650 Printer Driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.

Please visit the Lexmark website to download and install the Lexmark X4650 printer driver on your computer. Select your operating system > download > execute the file. Just follow the instructions on your computer screen.

go to main lexmark web site and download the drivers to disc.

You can download the Lexmark X4650 driver from the Lexmark website at http://bit.ly/d4cHfz. Choose your operating system using the drop down.


Then, download, execute the file and follow the instructions in the software. Thank your for choosing Lexmark.

Hi,

Have you tried restarting your PC? Once you do this, unplug your printer power cord for a few minutes, uninstall your printer from your computer and reinstall the software. Then plug your power cord back into your printer and try printing your document once more.

Hope this solves your problem.
Best wishes,
Graemevm

pop over to lexmark and download the drivers if needed.
First check in add/remove and see if the lexmark is there, if it is, uninstall.
Install the new drivers and plug the printer in.
drivers are here http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_UK&question=x4650&productCode=LEXMARK_X4650&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X4650&searchid=1279483259791#1

Make sure there are no print jobs stuck in the queue then unplug the power adapter from the printer. The power adapter is the black box behind the printer where the power cord is attached. Wait at least 30 seconds before plugging it back in. When the printer's ready, try printing again. If the problem persists, I suggest you contact Lexmark Technical Support to further investigate the problem. Thanks.

please follow the link below to download the driver for your printer directly from Lexmark.

For Lexmark http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0

use the product selector to select your exact model and operating system.