Question about Philips J44414

1 Answer

How to install my pc camera?

It's a phillip {j444414}, that you click on the laptop and adjust the lens

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

You can find its driver here: http://rapidshare.com/files/115647367/phillipscamSIC4750.zip

Please rate this solution.

Posted on Sep 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change headlight bulb on 02 road king police


I thought I would answer for ALL models so anyone else can read this and not have to post a new question which will take a considerable amount of time to answer again some other time and which therefore might not get answered as quickly as one would hope while in the need for an answer.



HEADLAMP (FLHR/C, FLHT/C/U)

HEADLAMP ASSEMBLY



To REMOVE:

First remove the Phillips screw at the bottom of the headlamp door chrome ring and remove the headlamp door.

On FLHT/C/U remove the four TORX screws to free the headlamp housing from the fairing.

On FLHR/C remove the eight Phillips screws to free the headlamp housing from the headlamp nacelle.

Then if installed squeeze the two external tabs to remove the wire connector at the back of the headlamp bulb.

Next remove the headlamp housing assembly from the vehicle.



To RE-INSTALL:

First connect the wire connector at the backside of the headlamp bulb.

On FLHT/C/U align the holes in the headlamp housing with those in the fairing at the bottomof the headlamp door bracket and install the four TORX screws.

On FLHR/C align the holes in the headlamp housing with those in the headlamp nacelle at the bottom of the headlamp door bracket and install the eight Phillips screws.

Next fit the square-shaped portion of the headlamp door spring into the slot at the top of the headlamp housing and then snap the headlamp door chrome ring into place and install the Phillips head screw at the bottom of the headlamp door and tighten it to 9-18 in-lbs which is (1.0-2.0 Nm).



To Replace the Headlight bulb:



First remove the Phillips head screw at the bottom of the headlamp door chrome ring and remove the headlamp door. THEN remove the three Phillips head screws to free the retaining ring from the headlamp housing. THEN carefully remove the lens and bulb assembly and if installed squeeze the two external tabs and remove the wire connector at the back of the headlamp bulb. THEN remove the lens and bulb assembly from the vehicle. THEN remove the rubber boot at the back of the lens and pushing down on the wire loops free their ends from the slots on the lens insert and swing the wire form out of the way.



HEADLAMP (FLHR/C, FLHT/C/U)

HEADLAMP ASSEMBLY



To Remove:

First remove the Phillips head screw at the bottom of the headlamp door chrome ring and remove the headlamp door.

On FLHT/C/U remove the four TORX screws to free the headlamp housing from the fairing.

On FLHR/C remove the eight Phillips head screws to free the headlamp housing from the headlamp nacelle.

THEN, if installed, squeeze the two external tabs and remove the wire connector at the back of the headlamp bulb and remove the headlamp housing assembly from the vehicle.



To Re-Install:



First install the wire connector at the back of headlamp bulb.

On FLHT/C/U align the holes in the headlamp housing with those in the fairing at the bottom of the headlamp door bracket and install the four TORX screws.

On FLHR/C align the holes in the headlamp housing with the holes in the bottom of the headlamp nacelle headlamp door bracket and install the eight Phillips head screws. THEN fit the square-shaped portion of the headlamp door spring into the slot at the top of the headlamp housing and snap the headlamp door chrome ring into place and install Phillips head screw at the bottom of the headlamp door and tighten it to 9-18 in-lbs which is (1.0-2.0 Nm).



To replace the headlamp bulb:





First remove the Phillips head screw at the bottom of the headlamp door chrome ring and remove the headlamp door. THEN remove the three Phillips head screws to free the retaining ring from the headlamp housing. THEN carefully remove the lens and bulb assembly and if installed squeeze the two external tabs and remove the wire connector at the back of the headlamp bulb. THEN remove the lens and bulb assembly from the vehicle. THEN remove the rubber boot at the back of the lens and pushing down on the wire loops free their ends from the slots on the lens insert and swing the wire form out of the way.





To Align the headlight:



First verify that the bike has the correct front and rear tire inflation pressure and put the bike on a level surface in an a location with minimum light and point the front of the bike towards a screen or wall which is 25 feet (7.62 m) from where the patch of the front tire contacts the surface which would necessarily be directly below the front axle.

With a horizontal line drawn on the screen or wall precisely atthe same height above the floor as the centre of the headlamp and a person with roughly the same weight as that of the principal rider sitting on the seat of the bike to compress the suspension the same as t would be with the rider on the bike and with the bike in a fully upright position similar to the position it would be if being ridden straight ahead, (i.e. with both tires on the floor) and the front wheel pointed straight ahead at the screen or wall, turn the Ignition/Light Key Switch to IGNITION, set the Light Switch on the left handlebar to High beam and check the light beam against the screen or wall for the correct height alignment. The centre of the main light beam should be even with the horizontal line on the screen or wall and be pointed directly ahead so that there is an equal amount of light beam to the left and to the right of the centre mark on the screen or wall. (this would be the lateral alignment).

If the alignment is not correct it can be adjusted without removing the headlamp door chrome ring by using slots placed into the headlamp door through which a Phillips screw driver can be inserted (between the headlamp housing and the rubber gasket). By turning the vertical adjuster screw as necessary the headlamp can be adjusted vertically (up or down). By turning the horizontal adjuster screw as necessary the headlamp and be adjusted horizontally (left or right).



HEADLAMP (FLTR)

HEADLAMP ASSEMBLY

To Remove:

First remove the outer fairing and windshield and move it aside to a work area and squeeze the two external tabs to disconnect the headlamp harness connectors from the bulb contacts. THEN after wrapping some electrical tape around the blade of a screwdriver (to prevent damage to tabs of the transparent lens cover), from the inboard side of the outer fairing, release the top of the transparent lens cover from the slots in the fairing by gently

depressing the two tabs with the blade of the screwdriver. THEN depress the bottom two tabs and remove the lens cover from the fairing. THEN depress the mounting clips on the three hex adjuster studs and pull the headlamp assembly out from the front of the outer fairing.



To Install:

First align the hex adjuster studs with the plastic bosses on the inboard side of the outer fairing and push the headlamp assembly into position in the outer fairing until the mounting clips engage their bosses. THEN carefully snap the bottom tabs of the transparent lens cover into the bottom slots of the outer fairing and carefully snap the upper tabs of the lens cover into the upper slots of the outer fairing. THEN install the headlamp harness connectors onto the headlamp bulb contacts, install the outer fairing and windshield back onto the bike.



To Remove:

First remove the outer fairing and windshield. THEN move the outer fairing assembly to your chosen work area.

THEN squeeze the two external tabs to disconnect the headlamp harness connector from the headlamp bulb contacts, remove the rubber boot at the back of the headlamp bulb housing, rotate the plastic retainer in a counter-clockwise direction to remove from the headlamp bulb housing flange and remove the headlamp bulb.





To Re-Install:



First install the headlamp bulb into the headlamp bulb housing orient it so that the wider ear on the backplate is topside and then push the bottom of the backplate so that the tabs on the outboard side fit snugly into the slot of bulb housing. THEN place the plastic retainer over the bulb housing flange and rotate it in a clockwise direction until it is tight. THEN install the rubber boot over the retainer until it is flush with the base of the bulb socket, connect the headlamp harness connector to the headlamp bulb contacts install the outer fairing and windshield.



HEADLAMP ADJUSTMENT is same procedure as above except:



If the alignment is not correct it can be adjusted by locating the hex adjusters near the bottom edge of the inner fairing. Turning of the adjusters causes the double headlamp housing to pivot around its upper mount, so by using a 4.5 mm, 1/4 inch drive and a flexible driver the headlamp assembly can be adjusted horizontally by turning either the left or the right side adjuster. Both adjusters should be turned equally to adjust the headlamp vertically. Adjuster rotation moves the headlamp beam as follows: Left Only = Clockwise and Right Only = Counterclockwise and beam movement will be to the right.Left Only = Counterclockwise; Right Only = Clockwise and beam movement will be to the left. Left and Right Equally = Clockwise and beam movement will be upwards. Left and Right Equally = Counterclockwise and beam movement will be downwards.

Sep 03, 2014 | Motorcycles

1 Answer

Pc camera lens 2.8 driver


1st You download Webcam Driver.
Pc camera lens 2.8 driver
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Dec 31, 2012 | Computers & Internet

1 Answer

My cam blurd


If it's a built in camera clean the lens with a Qtip, if it's a plug in USB camera clean it and try rotating the ring around the lens at the front, some cams have adjustable focus and can be changed by accident when handling the camera or cats knocking them off tables.

Aug 15, 2011 | Computers & Internet

1 Answer

Setup installation ou CD d'installation


Usually you don't need to install a driver for a digital camera. Most modern operating systems will detect your camera as a Mass Storage Device when connected.

You can find Phillips camera software here:
http://www.usa.philips.com/c/digital-camera/8-megapixels-with-swivel-lens-silver-sic3608s_g7/prd/;jsessionid=70EEBA1CBDA90A11ED02A95A92B38ED2.app101-drp3?t=support

Feb 25, 2011 | Philips Cameras

1 Answer

How to install desktop camera on hp


hi

Insert the installation disc that comes with your webcam (PC camera) and follow the instructions to install the drivers. This varies with different models and manufacturers.
  • Step 2 Connect the USB cable attached to your webcam to an open USB port on your computer when prompted to by your installation disc.
  • Step 3 Place the webcam on top of your monitor and maintain a distance of about three feet at most. This ensures that you remain in frame and the camera stays in focus.
  • Step 4 Adjust the angle of the webcam so that the lens and the built-in microphone are facing you. Adjust your desktop speaker to face you for proper audio playback.
  • Step 5 Launch the messenger program you like to use and begin video chatting with your family and friends.
  • Jun 24, 2010 | HP Compaq Presario V2000 Notebook

    2 Answers

    Phillips webcam 300 nc wont work


    Normal 0 You need to go to the manufactures site and download the XP or VISTA driver for the camera. Then follow the info below to install the program.



    Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
    Hope this helps. Bud

    Sep 23, 2008 | Philips SPC300NC Webcam

    1 Answer

    Installation of VEO STINGRAY Internet PC Camera


    1st You download Webcam Driver. Veo Driver After this install the webcam driver in the system.
    Installation of Webcam Driver
    • Go to the control panel
    • Click on the System Icon
    • Click on the Hardware Tab
    • Click on the Device Manager then
    • Select the Unknown Device where yellow Question Marks sign on it.
    • Right click on it and uninstall it.
    • After this go to the top of the device manager and click on scan for hardware changes.
    • Driver installation Wizard start.
    • Brows Your Driver from the Hard Disk and click on next.
    • Driver will be install.

    Jul 31, 2008 | Veo Stingray

    10 Answers

    PC Camera Software


    To all you who did not receive a cd for this web cam, you can download the driver here.

    Feb 06, 2008 | Philips J44414

    Not finding what you are looking for?
    Philips J44414 Logo

    Related Topics:

    23 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Philips Computers & Internet Experts

    The Knight
    The Knight

    Level 3 Expert

    72670 Answers

    micky dee

    Level 3 Expert

    2644 Answers

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Are you a Philips Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...