Question about Projection Televisions

1 Answer

Samsung LNT4042HX LCD -unit powers up but no picture on any inputs or antenna, menu will not show, sound is fine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

It seem to be light bulb problem to me, good luck

Posted on Sep 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a toshiba 43ax60 has sound no picture and the power light stays on when powered


you need to explore menue for tv options and select the proper input as well as other options.

Sep 17, 2012 | Toshiba 43AX60 43" Rear Projection...

1 Answer

Moved tv in....it worked before I moved it....now I cant get a clear picture on any input. I pull up menu and it is clear and the sound is fine. Do I have screen probkems now or could it be the inputs in...


Hi Scott,
Try to wiggle the input cord also the jack. If the picture come out clear then you might have a loose connection. To confirm you can swap a new cord and then hook up again. If the symptom is still there then you have a loose connection on the back of your unit (jack).
Hope it may help you.
JDVillanueva

Feb 06, 2011 | Samsung Projection Televisions

1 Answer

HD50LPW42 screen is black with antenna inputs


It sounds to me like you have a tuner issue, I have seen this before. If you have a good picture from other sources and they have the same antenna input, the tuner is suspect.

I hope that this helps you solve your issue.
Thanks
asnowman

Aug 01, 2009 | RCA HD50LPW42 50" Rear Projection HDTV

1 Answer

The picture went fuzzy (color alignment).


craighirman,

try going to the antenna input from the menu screen, then trying to do the auto focus, or manual focus. My Samsung won't let me do the auto focus unless I'm looking at the antenna for some strang reason.

Oct 18, 2008 | Samsung PCL545R 54" Rear Projection...

3 Answers

RCS Scenium


What is your TV input connection? Are you using Antenna? Cable? Dish?

The Unusable Signal sounds like the TV is not getting a signal. Does your TV have a built in HD Tuner?

If you are using Antenna you might want to try setting up the connections and it should search for quality channels that you get good signal strength. If you are on channel 2 and there is no over the air channel 2 it may say "unusable signal".

Sep 24, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Still won't work


Hi again,

This forum has much info re Mitsubishi PTVs. Nonetheless, an excerpt from there....
1.Set the Layer Switch at the top of the Mitsubishi Remote to TV.

2.Press and hold the POWER button, and while holding the power button enter 090.

3.Now the remote should function like this:

Power = Power On Discreet
Stop = Power Off Discreet
Pause = AV Reset

Pressing INPUT followed by:
PIP = DTV
1 = Input 1
2 = Input 2
3 = Input 3
4 = Input 4
5 = DVD / Component 1
6 = Component 2
SQV = Input STB
QV = Input VGA
PIP CH Up = Antenna A
PIP CH Down = Antenna B

4.When done, press and hold the POWER button and enter code 000 to return to the standard remote functions

Apr 17, 2008 | Projection Televisions

1 Answer

HD stations have no picture, sound only. Other inputs show picture.


or antenna try ch 5 ch 12 re auto scan the chs in menu again readjust antenna

Jan 29, 2008 | Toshiba 46H84 46" Rear Projection...

1 Answer

No picture, sound OK...setup menu shows up, able to get picture in PIP


You will need to check the inputs on the television. You more than likely have a bad video in signal. This can be a bad cable or a loose connection either at the input of your television or at the output from your receiver, (cable or satellite). First, try wiggling the cable and then try replacing it. This should fix the problem. If not, your signal may be routed through a stereo or other switching device?

Apr 17, 2007 | Samsung PCL541R 54" Rear Projection...

2 Answers

Picture is snowy on every channel. I hooked up my playstation and set it to the correct channel but the screen display is the same. I tried using the menu and the menu comes up just fine. The menu goes on...


If one tv looks good and another one dosent look good or operate correctly then we know for sure that the problem is not the antenna. Now the menu comes up ok because the menu is injected after the tuner into the video curcuit from a osd or microprocessor. sounds like you could have a defective tuner or antenna block assy.

Mar 27, 2006 | Toshiba 42H83 42" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...