Question about Panasonic KX-TG5632 Phone

2 Answers

Number of rings

My phone just rings two times before going to answering machine. do you know how to set the number of rings?

Posted by on

  • Anonymous Mar 29, 2014

    Limit number of rings before answering message

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Two rings means it has message, erase the message to increase the number of rings to like four

Posted on Oct 19, 2008

I want the quik guide and the manuel instructions to activate in french sorry for my english,rivardsonia@videotron.ca

Posted on Sep 26, 2008

4 Suggested Answers

  • 1 Answer

SOURCE: IIncreasing the number of times the phone rings before message system answers

I have a Panasonic KX-TG5632 and I need to set the ring time, how do I set the ring time?

Posted on Jun 10, 2008

Noggin
  • 944 Answers

SOURCE: setting the number of rings before answering machine kicks in

Here is the link to the user manual; http://service.us.panasonic.com/OPERMANPDF/KXTC1501B.PDF Check page 19 - you can set the answer rings from 2 to 7 Hope this helps :)

Posted on Jun 19, 2007

  • 729 Answers

SOURCE: How do you set the number of times the phone rings

Hi kcee
I think I did find the manual here :
http://157.254.235.130/public/347A8329-0001 (Rev. 1 E&S).pdf
and here :
http://phone.manualsonline.com/manuals/mfg/ge_appliances/29827.html

you can find more types here :
http://phone.manualsonline.com/manuals/mfg/ge_appliances/ge_appliances_answering_machine_product_list.html


You can find General Electric home page here:
http://www.geappliances.com/electronics/

I suggest you contact GE on the link to get the manual and understanding your answer machine with a reply :
http://www.geappliances.com/service_and_support/contact/form_operating.htm

FOR Thomson Consumer Electronics :
you get there homepage here :
http://www.home-electronics.net/

I did try to find the manual for your specific phone, but could only find these answer machines here (previous and next model number) :
http://www.home-electronics.net/ge/pc/IB/29871GE3_IB.pdf


http://www.home-electronics.net/ge/pc/IB/29869GE2_IB.pdf

source :
http://www.home-electronics.net/ge/pc/user-manuals.asp

on the second manual here on page 9 you find the settings to answer. I think they have used the same shortcuts for these models. They write ;

### This feature is used to set the unit to answer a call after
a specific number of rings.
The unit announces the rings to answer. To change,
press NEXT or PREVIOUS. To set and go on to the next
item, press SET.
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct number of rings
for the answerer to pick up.
2. Once the rings to answer is set, press SET. The unit
announces the rings to answer, then enters the
incoming message length menu.
TOLL SAVER
The toll saver is the final setting in the Rings to Answer..........####

For the GE model you find these features on page 17

One last thing, you can contact Thomson Consumer Electronics for more specific answer or get the manual here :
http://www.home-electronics.net/ge/pc/contact.asp
they have also a phone :
"For customer service assistance, dial 1.800.448.0329. Our hours of operation are Monday thru Friday, 8am to 8pm Eastern, Saturday and Sunday 10am to 7pm Eastern."

Hope that helps
IF NOT then try to return here
Have a nice time over there
Please rate my answer

Posted on Jan 03, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Answering Machine Problem


You have not configured the phone. If you do not set the number of rings before switching to the answering machine, the phone rings ten times then goes to the answering machine.

Aug 20, 2014 | Panasonic KX-TG6441 DECT 6.0 Digital...

1 Answer

Hooking up fax to KX TG7871 Panasonic Phone


There is excellent support here on basic fax setups. You have what is known as "Distinctive Ringing Service". There are pros and cons to the various setups. I assume you recognize the rings and answer only when the ring for the landline talk comes on. The fax will pick up the faxes, and the answering machine will pick up the voice.

Need model number of your fax - google that!

Service manual for your phone.

http://service.us.panasonic.com/OPERMANPDF/KXTG7841-MUL.PDF
This link shows various configurations of setting up your phone/fax/answering machine or using an answering service.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059780#Dist_ring
Distinctive Ringing Service setup While it is not available everywhere, a distinctive ringing service can be purchased from most telephone companies. With this service, more than one phone number is assigned to the same phone line. Each phone number will ring differently. The main number will ring with a normal single ring and the additional number will ring with a distinctive ring pattern assigned by the phone company.
When a distinctive ringing service is used, set the Rings to Answer to 2 and then follow the steps below to set the distinctive ringing pattern:
  1. Press Setup , press 4 , and then press 1 to enter the Answer Ring Pattern setup of the Advanced Fax settings.
  2. Use the Right Arrow to scroll through the available settings. When the ring pattern assigned by the phone company displays (double or triple rings), press OK .

Mar 06, 2014 | Lands Phones

1 Answer

How i can set up only 3 rings before going to answering machine?


Use the RINGS TO ANSWER switch on the back of the base to set the number of times you want the phone to ring before the answering system answers the call. You may choose 3 rings, 5 rings, or TOLL SAVER (TS).

You can download the manual at
http://www.home-electronics.net/ge/pc/IB/25952EE1_IB.pdf

May 10, 2011 | GE 25952 Cordless Phone

1 Answer

THE ANSWERING SYSTEM WON'T RECORD MESSAGES,ALL MESSAGES GOES INTO POOVIDERS VOICE MAILE, AS IF MY PHONE IS BUSSEY?????? I CHECKED AND RECORD TIME IS NOT SET TO ANNOUNCE ONLY ANS ALL MESSAGES HAVE BEEN...


This happens when the number of rings to answer of the provider voicemail is less than the number of rings to answer that the answer machine is set for. For example: if your provider voicemail rings to answer is set for 3 rings and the answer machine is set for 4 rings then the voicemail answers before the 4th ring, therefore the answer machine will never get a message. I would call the service provider's customer service number and request they increase the rings to answer above the number of rings to answer that the answer machine is set for. If you don't want voicemail to answer any calls(when your line is busy or when the answer machine is turned off) ask your service provider to disable voicemail.

Mar 30, 2011 | Uniden Cordless Phone

2 Answers

I have philips landline phones. My main phone does not ring or flash when an incoming call comes in. I t won't go onto answer phone either it just rings out. I can pick it up and answer the call. i can...


Looks like the basic functions of the phone are correct. Remain the answering machine. Are you sure it can act as an answering machine?
If it can act as answering machine the reason it is not doing so may be the following.
  1. Answering function is turned OFF
  2. Answering function may be ON but the number of rings before it answers is set too high.
I suggest you try the following
Call you phone. Let it ring at least 10 times. If it can act as an answering machine it will pick up the phone and read the welcome message, because most answering machines (the recent ones at least) answer after 10 rings even if answering function is turned OFF.

The phones that can be answering machines usually do have a display that shows the number of incoming messages, or a LED that flashes to let you know that you have new recorded messages.

Jan 03, 2010 | Philips Lands Phones

1 Answer

Incoming calls briefly ring once then automatically kick over to answering machine. I cannot get any incoming calls


Are you using norstar voicemail system?

If you are and know how to get into the admin programming of it, then you go to the line programming and select the number of rings before the vmail system answers.

set the rings to "3", then the lines should ring 3 times on your phone, then on the 4th ring the vmail system will answer

Jun 26, 2009 | NorStar M7208 Corded Phone

1 Answer

How can i change the ringer on my fax machine?


Setting Ring Delay:
The Ring Delay setting determines the number of times the fax machine rings before it answers. If you have extension phones on the same line as the fax machine, keep the Ring Delay at a default setting of 4:
1 Press Function/Set, 2, 1.
2 Press < or > to select how many times the line rings before the fax machine answers (00 – 04) and press Function/Set. If you select 00, the line doesn’t ring at all.
3 Press Stop to exit.

Hope that's clear enough :)

Chris (ziraffa)

Dec 10, 2008 | Brother IntelliFAX 560 Plain Paper Fax

1 Answer

Increase numbers of ring


If the machine won't go past 4 rings (which it should somewhere in the answering machine settings menu) you could always change your greeting to a message that tells the caller to wait a few more moments for you to answer, while you get to the phone....

Jul 15, 2008 | Uniden TRU8885 Digital Answering Machine

1 Answer

How can I change the Rings to Answer setting to one ring?


Set the number of rings before answering
If you turn on the Auto Answer setting, you can specify how many rings occur before
incoming calls are automatically answered.
The Rings to Answer setting is important if you have an answering machine on the
same phone line as the device, because you want the answering machine to answer
the phone before the device does. The number of rings to answer for the device
should be greater than the number of rings to answer for the answering machine.
For example, set your answering machine to a low number of rings and the device to
answer in the maximum number of rings. (The maximum number of rings varies by
country/region.) In this setup, the answering machine answers the call and the device
monitors the line. If the device detects fax tones, it receives the fax. If the call is a
voice call, the answering machine records the incoming message.
To set the number of rings before answering via the control panel
1.
Press Setup.
2. Press Basic Fax Setup, and then press Rings to Answer.
3. Enter the appropriate number of rings by using the keypad, or press the left or right
arrow button to change the number of rings.
4. Press OK to accept the setting.

Get manual at http://h10032.www1.hp.com/ctg/Manual/c00863866.pdf

Jul 07, 2008 | HP Officejet Pro L7680 All-In-One Printer

2 Answers

Number of rings before answering system goes on


You can adjust the Answer Delay time by going to Menu then DTAD. Adjust the Answer Delay under this menu... 6 seconds per one ring.

If you have auto attendant set up to answer for you in a multiline system, set that delay accordingly. That will be the first system to pick up, You should set up one auto attendant for every voice line coming into your phones.

Dec 18, 2007 | Lands Phones

Not finding what you are looking for?
Panasonic KX-TG5632 Phone Logo

832 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

98868 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...