Question about AOpen AK79G-VN Motherboard for AMD

1 Answer

Motherboard want wake up

Recently my motherboard AK97D-VN400 has stopped responding. I found power supply defective and i have shanged it by new one, but i still have the same problem. Only on board power led is working and nothing else is hppening when i push power up button.
Could you please send me schematics of motherboard and give me some guidance element what could be damaged.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Check your RAM clean it and refix i tin both slots .try to chenge RAM if problem still not resolved.
Check yoyur processor is rightly fix on position.

Posted on Sep 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mother boards


You probably have voltage fluctuations in your domestic power supply. Please use a good quality surge protector or a voltage stabilizer.

Nov 14, 2013 | Computers & Internet

1 Answer

Intel D946GZIS machine will not start after being reassembled. The green light on the Motherboard is on but after hitting the power button nothing happens


It is more than likely the power supply that is faulty. Newer PSU's have a 5volt supply missing, this means that some older boards will not run with the new PSU's. Try and find an exact match for your older supply but with a better power rating, if that is what is required.

Jun 24, 2012 | Intel D946GZIS Motherboard

2 Answers

New system hangs at p.o.s.t


I would first clear the cmos. Then try to get back into the bios and check the ram voltage setting. My Asrock board AOD790GX128M had me use the #3,4 memory slots, the #1,2 gave me the bsod. You may want to try that also. I hope this helps you.

Aug 13, 2009 | Asrock 4CoreDual-SATA2 Motherboard

1 Answer

Hardware monitor found an error


First I would make sure all the power plugs are properly plugged into the motherboard and all other devices.

If that does not solve it then I would get the Power supply tested at a local PC shop. Or just get a new decent power supply. Looks like the Power supply without a doubt is defective.

Jul 08, 2009 | ASUS A7V333 Motherboard

2 Answers

Laptop keyboard not working when LED Power board is connected.


I agree. Your best bet if you don't know what you are doing is to find a repairer.

Jul 07, 2009 | Intel 430180-001 - HP Pavilion dv8200...

1 Answer

No boot or wake up


Chances are you need to change the power supply,, but first you need to check to see if its workingm this is quite easy

1.) unplug it
2.) remove the power connector from the main board
3.) on the power connector is a green wire(ONLY ONE) and right next to it is a blact wire(any black will work)
4.) use a peper clip or unisulated wire to bridge the green and black wire by inserting it into the jack contacts.
5.) plug in the power supply, if the fans spins then its working..

If the power supply is fine then you will need to check the power button connectors *wire from power button that connects to the main board),, if the connection is fine, then unjack the connectors and use a bladed screwdriver to bridge the pins for the power button connector on the main board,it should boot up. If not then you need to have that mainboard replaced

Jul 27, 2008 | EliteGroup P4M800-M7 Motherboard

1 Answer

EVGA motherboard not turning on...


Your motherboards is getting heated, there might be a manufacturing defect in the board, if there is a warranty claim it.

Dec 06, 2007 | Evga (122-CK-NF68-T1) Motherboard

1 Answer

Motherboard not functioning


If the power supply had a problem then it is likely that the motherboard and/or the CPU got damage from that. I would check the 12V and the 3.3V lines from the PSU.

Without more information I cannot say specifically what the problem is. You can try disconnecting everything from the motherboard except video card, CPU, and RAM to see if it would work that way. If it does then you can start connecting devices until it does not work any more then you have found the problem. If that does not work at all then unplug the video card and RAM see if anything changes (you should get a beep code without the video or RAM). If nothing changes then either the CPU or motherboard is bad and the only way that I know of to find out which one is to either try the CPU in another motherboard or try a different CPU in that motherboard.

Nov 12, 2007 | Intel Motherboard

1 Answer

No any display in the monitor, no beep of the RAM while CPU fan is running


Check your power supply. It sounds like you have a bad power supply. Even though the computer powers up, it does not mean that it's good. I have had this problem before, and almost 9 out of 10 times the power supply had gone bad. Just try a different one and see. hope this helps you.

Oct 01, 2007 | ASUS P5S800-VM Motherboard

1 Answer

12v 4-pin connector issues


Sounds like your board has some issues (might of even caused your power supply to fail) try unplugging all IDE devices, removing pci slotted cards and anything else plugged into the board so you are only left with the Motherboard, Processor and Memory. Try to start the board now to see if one of your devices was causing the problem. If the board now comes on, try installing the devices back one by one to see which one is causing the problem. If that still doesn't work, try to further test your possible to see if they are working correctly. If all that fails, your board is probably the cause and needs to be replaced. Good Luck.

Apr 17, 2007 | Gigabyte GA-8IE533 Motherboard

Not finding what you are looking for?
AOpen AK79G-VN Motherboard for AMD Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top AOpen Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you an AOpen Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...