My room size is 16ft.1" X 17ft.3".00. Hight is 10ft. 6" .I have Onkiyo
898 A/V Receiver and thx certified LCR Speaker with 4 diopole surround &
back surround . L- C- R speaker & surround and two back surround are place as attech file herewith Ditance L-C-R 10ft .6 " & SURROUND LEFT & RIGHT ARE 8ft .6" and back left -right Back surround 6FT.6" ARE far from my iistaning -sitting . .
I put SPL METTER incenter room and set at 82db in all speakers.i.e left +8 db , center +5 db, Right +8 db, right sur +2 db , back sur. left +4 db, right back sur.+4 ,& left sur +4 db Woffer JAMO D-7set near front Left at 9ft. 5" far my sitting on +3 db in ONKYO 898 AV RECEIVER.
I got good sound .But WHAT & WHICH set delay AND
distance in A/V.So what do I do .Please guide to me properly for same and got
surround My room size is 17ft.10' x 16ft hight is 10ft.3".
SIR,
IN MY ONKIYO INTERRA TXS 898 A/VR NOT IN BUILT AUTO SET UP .
NOE I PURCHASE ONLY AUTO SET UP (DON'T KNWO NAME OF INSTUMENT) WHICH CAN ATTECHE WITH MY A/VR AND CAN do ALL CHANELL -speaker 7.1
MAY I GOT DIAGRAM OF SETTING, DISTANCE, DELAYTIME, DESIGN SITTING FOR MY ROOM.?
SOURCE: no surround sound
So your saying that you have no rear channel. Some recivers use a single stereo output ic for both sides on the rear speakers. you could have a defect with this IC . Anther thing Im sure you check3ed the obvious ie : the switch is on suround sound? If there is a front to rear fader is it in the middle? Good Luck
SOURCE: Hi We are setting up our
Hi there. If you are running a 5.1 speaker system, make sure your surround speakers are on the surround terminal NOT ON THE SURROUND BACK. the surround back is only for the 7.1 speaker system.
133 views
Usually answered in minutes!
×