Question about Proscan PS50700 50" Rear Projection Television

Open Question

TV made loud pop and quit working!

I was watching TV when it made a loud pop and quit working, I unplugged the set and checked the main fuse, all OK. I checked for power at the main board where the cord goes into and along other areas at the red & black wires. I have power, but the unit still won't turn on.I forgot to add it makes a strange noise too, kind of like a CD drive turning/rubbing. I am not familar with TV electronics (cars yes, tv's no), is there any online manuel or diagram showing me the parts layout and location. By reading these fixes here sounds like I may have a HV flyback tranformer problem. Could this be my problem. My Model # is 50700, production date 08/99 I will add my s/n# later. All of this happened right after my power came back on after gettiing knocked out from Gustav! Thanks

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1694 Answers

SOURCE: TV made a loud popping sound and quit working

Bad IHVT ( transformer ) = Part # 239111 use original only, no cheap subs !...............T.

Posted on Oct 02, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had a loud snap when watching then no power.


TV repair, clicking and will not power on, loud snap, no ...

? 13:57
https://www.youtube.com/watch?v=UKoR7pWAHzk
Nov 25, 2014 - Uploaded by Robert DIY
TV Power board replacement - 30 - 60 minutes ($20 / $110 / $250 / Replacement) This video will show you ...

Samsung LCD 46 Pop! Then Dead! - TV Forums

www.tv-forums.com/...Repair.../Samsung_LCD_46_Pop!_Then_Dead!_...

Nov 23, 2011 - 7 posts - ‎3 authors
While watching TV, I heard a loud pop, then the tv went dead. ... Ok, so I tested the fuses and the main fuse, by the power plug, had no ...

Samsung power defect causes some TVs to fail, and a class ...

www.cnet.com > Home Entertainment

CNETFeb 14, 2012 - A defective capacitor in some Samsung LCD, plasma and DLP TVs is causing the ... The LN-S4051D is one of the TVs Samsung admits has issues ... In a February 9 report entitled "More than 7 million Samsung TVs plagued by possiblepower defect", ..... Today I heard a loud pop and now I have no picture.

Feb 09, 2016 | Samsung Televison & Video

1 Answer

TV popped when turned on


bad manin bord poped the main power transister we nee dto replace that with spare part .

Feb 03, 2008 | Hitachi 50UX26B/27K 50" Rear Projection...

2 Answers

Samsung 60 plasma T.V. made a loud bang and wont turn on now.


That sounds pretty terminal I am afraid. First thing to check would be the fuse in the mains plug. After that it will need dismantling for any other fixes. If the fuse is ok, then I would start by opening the case up and looking for anything that looks blackened. Start on the pcb that connects to the mains cable.

May 29, 2015 | Samsung Televison & Video

1 Answer

Picture but no sound


the loud pop was a capacitor or a resistor popping, it will need replacing.

Jun 19, 2017 | Vizio JV50P 50 in. Plasma TV

1 Answer

Watching TV and all of a sudden a loud pop came from the back of the set. Doesn't turn back on after unplugging.


Hello
Check its power supply regulator board. The pop sound you heard may be due to an explosion to any electrolytic capcitors on it. If the line voltage exceeds, this fault will happen. just repalce the damaged component. It is best to replace this board as card basis.

Mar 19, 2012 | Hitachi 50HDA39 50 in. Plasma HDTV

1 Answer

I have a LG plasma 42PC1DG, watching tv loud pop then no picture but still have sound, left tv unplugged for a while still no picture?


probably the pop was a fuse blowing inside that only controls the lamp should be an easy fix but open the tv at your own risk

Dec 06, 2010 | LG 42PC1D 42 in. Plasma Television

1 Answer

No Picture on LG 42PX5D


You will have either a fault with the Y-Sustain board (this I would assume from your description is the board you changed the fuses on) or the buffer board which is the long panel to the left of this board. It is probable one of the drive ICs on this board has blown & a replacement board is the best solution.

Jun 26, 2009 | LG 42PX5D 42 in. Plasma HDTV

1 Answer

TV made a loud popping sound and quit working


The loud pop you heard was a part just blowing up and becoming non functional. Look for a bad capacitor - they can go out with a bang!

Since the set is dead the issue might very well be in the power supply - start there since those units are very vulnerable to failure.

Mar 12, 2017 | Televison & Video

2 Answers

TV made a loud popping sound and quit working


Bad IHVT ( transformer ) = Part # 239111 use original only, no cheap subs !...............T.

Oct 02, 2008 | Proscan PS50700 50" Rear Projection...

1 Answer

Whistle noise? POP? Black out


sounds like the lamp has shattered. check the lamp

May 18, 2008 | Samsung HLN5065W 50" Rear Projection...

Not finding what you are looking for?
Proscan PS50700 50" Rear Projection Television Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...