Missing the mounting piece for the camera, can it be purchased

Universal "Jimmy stand" for just about any TV available at Walmart or other places. They're 70 to 90 USD though. They include wall mount or a base to set the TV on a table or other surface. Search
sj-Stand-3755BB If you have parts missing on the manufacturer's one, good luck finding those, they typically come as a unit.

This will attach to ANY photo (camera) tripod. These can be purchased for under $30 on Ebay.

Try this Site: http://tripodquickrelease.com/Slik_Quick_Releases.htm

Tripod Model # 215AF Quick Release # 6019. you can view pictures of the Part # as well.

The small piece you refer to is actually a magnet that is mounted inside a plastic case. I would suggest the easiest way to replace it is to go to a nearby Radio Shack or similar electronics store and have them show you their stock of magnetic contacts for hardwired security systems. These contacts come in two pieces; a contact and a magnet. Match the magnet that most likely resembles the one you are missing and mount on your window/door with either screws or double sided sticky tape. Hope this helps.

Missing thing hard to claim incomplete,because of a long period times.U can try the place where u buy this tv or the 1800-??????? in ur instructional owner manual.Talk to their costomer service.

I had to solve my own problem by finding someone who had the same phone and didn't need this wall mount part. It seems odd that one wouldn't be able to find some type of universal wall mount that could be purchased. You also cannot return the phone to get a refund after 7 days - so when you give someone a gift for Christmas that has a part missing, and you are unable to return it within the 7 days you lose. I can't believe no one had a solution for this problem.

the giottos 6E01 quick release plate will fit snug. i bought one for my miranda tp20 today. you can get them from harrison cameras or warehouse express.

What you can do is find a local welder or metal shop in your area. Take the tripod with you, and ask them to fabricate a aluminum or steel replacement "shoe" for your tripod. Also have them drill a hole in the center so you can later insert the proper threaded screw that will mount to your camera. You may want to take your camera and get the proper threaded bolt first before you get the shoe made, so they can make the hole the correct size. You can go to any hardware or home improvement store and ask for assistance to find the right thread for you camera equipment. The bolt should not be any longer than1 inch, so it will mount tight on your plate.

** Note you want a flush mount type bolt that when tightened on the plate is smooth on the bottom** This is so when you mount the shoe in the head, it will be properly seated.

You just have to push the ball part on the window mount into the socket part that holds the GPS. It's pretty tight, so you have to press pretty hard.

Just visit the link below for the tripods that you could purchase for your S630 camera:

http://www.myaccessorymall.com/product/product_list.asp?categoryID=34

Hope this helps.