Question about Casio Watches

Open Question

Casio Wave Man Watch

Casio man watch, mode, Adjust, Light, reciever, two button on each side. Want to know how to set the time with hr. hand & Min. Hand

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: how do I change time on timex watch?

These are settings for the Timex SPORTS 1440 Magnetism (5b841 -W163US)
These are for the 4 button SPORTS 1440 (not 6 button) - they will also work for the 1440 SPORTS "Informer" model wrist watch - you will NOT find these instructions on the Timex website - only the 6 button which will not work on these watches is on that site!

TIME AND DATE

  1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash.
  2. Press ADJUST to set SECONDS to zero.
  3. Press START/STOP to select MINUTES.
  4. Press ADJUST to change.
  5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM.
  6. Press MODE when done.
  7. To display DATE from Time display , press START/STOP.
  8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE.
  9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.
ALARM AND HOURLY CHIME
  1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
  2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
  3. Press START/STOP to select MINUTES.
  4. Press ADJUST to change.. Press MODE when done.
  5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.

CHRONOGRAPH
  1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes.
  2. With time displayed, press MODE to select Chrono Mode.
  3. Press START/STOP to start.
  4. Press ADJUST to view lap time. Press again to sesume lap timing.
  5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero.
  6. Repeat for successive laps.
Have fun! - Not a bad watch for the money! - - Silver Bullet

Posted on Nov 10, 2007

  • 1 Answer

SOURCE: Casio Wave Ceptor WVA-104H

works, thanks

Posted on May 09, 2008

  • 13433 Answers

SOURCE: Casio Wave Ceptor WVA-104H

Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/

You will need a pdf reader on your pc, you will find all instructions in there.

If you don't have a pdf reader you can get one from
http://www.foxitsoftware.com/pdf/rd_intro.php

Posted on Jun 10, 2008

  • 1 Answer

SOURCE: casio wave ceptor WVA-105H

Casio is a great watch company

you can get online manuals anytime

http://www2.casio.co.jp/manual_pdf/wat/en/pdf_search.php?MODULE=2734&submit.x=49&submit.y=8

Posted on Nov 10, 2008

  • 1 Answer

SOURCE: lost maual to amw-700 casio watch

advance the mode 6 times to H S mode and push left upper button till the digital time flashing, then push rigth doun or up buttons to advance, please read manuals

Posted on Jan 20, 2009

  • 12 Answers

SOURCE: Adjust-a-Casio-S-1087DY-Watch-Band

On most brands, there are pins that form hinges for the links of strap. You need to push them out to remove links. Usually you would find arrows marked from inside of the metal bracelet which show you the direction in which to remove the pins. You can remove it if you have a small watch maker's screwdriver but you have to be careful. or get one of these ..
http://www.amazon.co.uk/Watch-bracelet-link-adjuster-remover/dp/B001ZKIL2S/ref=sr_1_1?ie=UTF8&s=watch&qid=1254695541&sr=8-1

which should help you to remove the link pins safely without scratching.

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oh, one additional thing about my CASIO 'WAVE CEPTOR' watch: After I got (finally) the manual and set up the watch, it set the DIGITAL display to the correct time & date, but the ANALOG display re-set...


You can align the analogue time with the digital time by pressing the mode button until you reach the hand setting position (HS) and then press one of the right hand buttons to change the hand position.

(Check out this with the instructions- it is all there!)

May 07, 2010 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

1 Answer

I want to set the analog time on my casio watch. I read manual but when I do what it says handsetting options don't pop up.


Keep pressing the "mode" button until "HS" appears in the digital display. Then use the right side buttons to adjust the hands.

If this does not work, go to "timex.com" find your support telephone number and give them a ring.

Mar 15, 2010 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

1 Answer

Cannot get time to set correctly. Hands off ~45min Wave Ceptor atomic watch set on home city CHI. Time is off an hr on screen and hands are off about 45min. Cannot get it set correctly.


You should be able to set your "home"city to give you the correct time but if it is an hour out, then it may be giving DST when it shouldn't (or conversely not giving DST when it should).

You can also se the hand to agree with the digital clock. The instructions are too long to write here but if you haven't go the instructions, you can get them by going to the Casio web site.

Enter "casio.com", select "support", then watches, accept the termd snd then select "watch manual archive".

Read the required number off the back of your watch and enter it into the search box. Click on "search" to obtain your instructions.

Feb 01, 2010 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

2 Answers

I need a manual for my casio wave receptor


For all those who lost their Casio watch manual. Follow this link, fill in the requested details and download manual. http://world.casio.com/wat/download/en/manual/

Jan 14, 2010 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

3 Answers

How to set time Casio W-89H two button watch


Actually, the watch has 3 buttons -- "Light" being the 3rd one. Press Mode until a number in the time mode begins flashing. Then press the Light button to get it to the hour indicator. Use the 12-24 Hr button to set it to the current hour. Then press the Light button again to get it to the minutes section. Again, use the 12-24 Hr. Button to set it to the next minute coming up in the current time. Then push the Light button again. This will bring up the seconds indicator. At the precise time the minute you set before begins, hit the 12-24 Hr. button, and the indicator goes back to zero and begins ticing away. Then hit the Mode button again until the watch is in the current time mode. Hope this helps. I use Internet time to set a precise time.

Jul 17, 2009 | Casio Watches

1 Answer

Casio Wave Ceptor Watch Model WV 109 HA


I found a hand setting mode. Press lower left button 6 times until the readout shows HS. Press and Hold Upper Left Button (A) until flashing. Press lower right button (D) to move the hand forward. Press upper right button (B) to move the hand backwards.

Apr 22, 2008 | Watches

4 Answers

Casio Wave Ceptor WVA-104H


Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/

You will need a pdf reader on your pc, you will find all instructions in there.

If you don't have a pdf reader you can get one from
http://www.foxitsoftware.com/pdf/rd_intro.php

Apr 14, 2008 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

3 Answers

Changing time wva105h


same problem i opened the back of the watch very eazy just 4 srews. And moved the hands to my time zone hope this helps you. now i have to do the alarm it keep going off a 3 pm every day i feel that will be much harder.

Mar 10, 2008 | Casio WVA105HDA Wave Ceptor watch

1 Answer

How to change the time of the analog watch in twincept?


push the mode button until you see h-s (hands set)
use the buttons at the right side to adjust when you are in that mode.

Mar 05, 2008 | Casio Twincept Databank ABX238BV Wrist...

3 Answers

I can't even set my Casio Marine Gear watch.


Go to this link and with the four digit module code from the back of the watch you should be able to get a manual; http://world.casio.com/wat/download/en/manual/ Hope this helps :)

Jan 15, 2007 | Casio Marine Gear MTD1042A-2AV Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

k24674

Level 3 Expert

7987 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...