Question about Televison & Video
I bought a used AT&T U-verse client box and need help trying to configure it with my existing network. I noticed it does have an older TV2 client version 220.127.116.114.2 compared with my other boxes. 1.2.43048.3
When turned on it does not find the bootstrap or server and just sits on the 'press ok to continue' blue screen.
How do I configure it to connect with the rest?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If the blue light on the receiver is on then your tv is most likely on the wrong channel after checking cabeling i would do a reset on receiver first wait for it to come back on, then run a channel scan on your tv2 you can do this with orignal tv remote under the menu options. its also refered to as a auto search or auto program.
Posted on Dec 02, 2008
it is multi sat multi sat compatable!My opinion is buy a powerd multi switch you can getem at radio shack or from a sat dealer that will clear p your prolem i belive also check all your rg6 coax ends u may have a a bad splice or a fraid shiel wich will make your reciever do the same thing but hope you can fix it
Posted on Jan 15, 2008
SOURCE: digilogic dstb1000
the function light dose not represent a remote command, it simply flashes when it detects a infra red signal of any wavelenth. if the box is not turning on it sounds like a defective nor or nand flash rom. i believe that the box has a j-tag so maybe you re flash it?
so inconclusion a defective flash means no os no os means the box wont work
hope this helps
Posted on Oct 31, 2008
SOURCE: Wyse S30 thin Client with Ubuntu
I played with those a lot with the LTSP and finally made it work...
All in all, the problem is that the X.org cannot autoconfigure the graphic chip of this client. On ubuntu 7.10 you need to force it to use the amd driver and cannot do it from the LTSP.conf file.
In your LTSP.conf file, you have to point to a xorg.conf file specific for your s30 thin client (I called it s30xorg.conf). Then you need to build this xorg.conf file (lots of help on the net on how to do this) and place it in the right folder. (The folder is probably not the same than on my system but it should be pretty obvious or at least written in the manuals or help files where to pu it). In this xorg.conf file, you will need to specify the amd driver and some standard vesa resolutions and refresh rates (also widely availavble on the net). Then dont forget to rebuild your LTSP image with those new files in the tree.
If I remember correctly you will also need to disable the ubuntu splash screen from another config file somewhere... I am sure you will find which one.
Let me know if you can make it work... if what I said is total gebrish, go on reading everythin you can find on the net until you understand what is here.
Posted on Dec 04, 2008
Tips for a great answer:
Mar 25, 2015 | Nortel Networks Ethernet Switch...
Jun 21, 2012 | AT&T UVerse
Apr 04, 2012 | Apple AirPort Extreme (AIRPORTEXTREME)...
Dec 19, 2010 | RCA Computers & Internet
Dec 11, 2010 | D-Link Computers & Internet
If you need more help come back.Post /
thumbs / testimonial are
Nov 30, 2010 | D-Link DIR-300 Wireless Router
Apr 27, 2010 | Cisco Computers & Internet
Oct 07, 2009 | Zoom X6 Adsl Modem/router Rohs...
May 11, 2009 | Computers & Internet
Jul 22, 2008 | Computers & Internet
461 people viewed this question
Usually answered in minutes!