Question about Harman Kardon AVR 130 Receiver

3 Answers

1998 bmw 328 I radio code

Change the battery and I need the radio code

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a 1992 325i and added a compatible remote mount trunk CD changer from a later model BMW. It also came with an extra radio I didn't need and I had someone that wanted to use it but couldn't because we didn't have the code. So I simply went to the local dealer with the head unit and they inputted the ID numbers on the radio in their "dealer service computer" and they came up with the radio code and this radio was from another country! I'm pretty sure if you go to your local dealer and give your car's VIN # they'll provide you with the code without even needing to take your radio out. Good Luck!

Posted on Sep 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found the code for the radio in the book some one wroted down the # is 51534 if some one need it

Posted on Sep 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey pradonapa i need the code could you sent me a email to mar_tu@yahoo.com

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No AM, how to fix?


-Read its manual before do more.


Good Luck


mai

Mar 20, 2015 | Jaguar 1998 XJ8 Radio a1z107373 CD changer

1 Answer

I need the code for the stereo it's a ford ba falcon 2004


When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Ford service centre and get them to enter this code for you.

Jan 28, 2013 | Audio Players & Recorders

1 Answer

Entering my code 3 times wrong now its locked up.my car is a range rover 1998 .


put your key in turn to position 1 turn on radio you will see _ _ _ _ on display leave like this for 1 1 1/2 HOURS then radio will read enter code put in your 4 diget number in radio will come on you dont have to press anything else tuneyour radio in sounds great

Dec 08, 2009 | Harman Kardon AVR 635 Receiver

1 Answer

My car radio asks for the code every time i use it. once the engine is running i can turn the radio on/off without putting in the code. Once the engine has been turned off i need to re-enter the code Can...


Check your car battery (either at a service station or by checking it's voltage if you have a voltmeter). The radio's anti-theft is triggering. This triggers when the battery has been disconnected; but if the voltage goes down (likely when you start your car), the radio may trigger the power disconnected alarm.

Nov 30, 2008 | Audio Players & Recorders

1 Answer

I had a new battery put in now the radio comes on and COD is displayed. HELP I need my music


Hi,
I'm assuming we are talking about a car receiver, and you just had the battery changed in the car. Changing the battery triggers an anti-theft feature in the radio, as if it had been taken out of the car and was trying to be used someplace else.
If it is a factory radio, you will have to go by a dealership to get the code. I drive an older, beat-up BMW, and the one time I needed a radio code for it, I was required to bring the car in physically. One, to make sure a dealership hadn't swapped radios somewhere along the line, and Two, to make sure I wasn't the thief trying to get the radio I had just stolen to work! :)
If this is an after-market car radio, there should be a code in the paperwork that came with it.

Sep 25, 2008 | Audio Players & Recorders

1 Answer

Changed the battery on the car now the radio needs a code and i dont have it


You must contact the manufacturer or else talk to a car radio repair place that does you brand of car stereo. Also a car radio install place will have you code. Good luck.

May 26, 2008 | Audio Players & Recorders

2 Answers

How can I reprogram Nissan pulsar car radio a battery change which has deleted memory? panel shows error message only ERR.


You will need to turn the ignition on (do not start the car) turn on the radio and leave it on for anywhere between 1 - 3hrs untill it prompts you for a code.

There is a internal timer which adds time depending on how many times the code is entered wrongly.

Do not start the car, or turn off the ignition or radio during the 1 - 3 hr period.

Hope this helps.

Thank you

Adam

Apr 27, 2008 | Audio Players & Recorders

1 Answer

Resetting the radio in the car


no leave it on for at least an hour then it should reset itself so you can re enter the code

Apr 06, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Harman Kardon AVR 130 Receiver Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harman Kardon Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

69795 Answers

Are you a Harman Kardon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...