SOURCE: Hello, we have the AEG 60820 Sensorlogic
Hi there
Found this site with the instruction booklet. PDF form so you might want to download and print out for future reference?
http://www.serviceforce.co.uk/pdfs/U22467.pdf
SOURCE: I have a dishwasher that only works intermitently...
most fault codes are 10, 20,30.........90 not familar with c2. ther is a fault earky on in a prog where if the pressure switch does not retun to empty the prog stops and displays 10 or 30. the pipe leading from the front of the sump to the pressure switch can sag. tieing it up to stop the sag can cure this..
SOURCE: Our AEG Favorit Sensorlogic Turbodryis
i have the same problem, i have a machine that is 2005 model and it does not heat the water or dry in the end
SOURCE: aeg sensorlogic 50700 first showed c2 message; we
Error message C3 is most likely indicating the flood switch is triggered. This means water is leaking from under the sump. The C2 error is linked to drain problems which you cleared.
116 views
Usually answered in minutes!
×