Question about Maytag MMV5000 Microwave Oven

2 Answers

I need to replace my maytag mmv5000 microwave door assembly

Hello, does anyone have any tips on replacing the door assembly on the maytag mmv5000adw? I would really like some instruction before I start removing parts. Please advise.

Thanks.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 8,820 Answers

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove.

Or you can watch a YouTube video (not a video I made) that demonstrates how it's done.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

i need to replace my maytag mmv5000 microwave door - 23c228e.jpg


Posted on Sep 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem.Boiling water when the microwave exploded and blew open the door. I had 1 1/3 c. glass safe cup in microwave. Luckly I was not in the kitchen when it happened. The glass cup was still standing with about 2 tablespoons of water left. Water was everywhere. The door seems to be ok. I hope it's safe.

Posted on Dec 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The touchpad on my microwave may tag model mmv5000b will not work, how do I fix the problem?


Hello,

the control board needs to replaced for the touch pad to respond well again.

Regards.

Dec 31, 2011 | Maytag MMV5000 Microwave Oven

1 Answer

Maytag MMV5186aaq touch pad doesn't recognize touches on all pressure points. I can't even set the clock.


That looks like you are in need of a replacement key pad.
I can't advise where to get one from as I don't know which country you are in.

Mar 14, 2011 | Maytag MMV5000 Microwave Oven

1 Answer

Unit is 10 years old. Everything is working (keypad, lights, turntable) but unit is not heating food.


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

';

'

Oct 06, 2010 | Maytag MMV5000 Microwave Oven

1 Answer

Maytag microwave suddenly died after 20 seconds of use - lost all power. Outlet is good. Anyone else experienced this? My cup of tea looks sooo sad - like my wallet... Appreciate your time and...


Replacr the internal fuse you will find when you remove the cabinet. It will be near where the cord enters the cabinet. It is a special fuse ... get a replacement at most hardware of appliance parts stores.

Aug 31, 2010 | Maytag MMV5000 Microwave Oven

1 Answer

Was heating up some food and the microwave just stopped working, all the lights are off and I checked the fuse and the plug-in


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101
ti6854

Oct 20, 2009 | Maytag MMV5000 Microwave Oven

1 Answer

Maytag mmv5000bdw Touch panel works intermittently The panel will not respond to the touch. Work around include: 1. closing the microwave door hard and trying again. 2. unplugging the microwave and trying...


If nothing works, it sounds like you didn't get the cable inserted properly. It should fit into a connector which carries signals to the microwave's control components. These connectors usually pullup, you insert the cable, and push the connector back down.

Oct 14, 2009 | Maytag MMV5000 Microwave Oven

1 Answer

MMV5000ADW Maytag Microwave Keypad stops working. The light switches on and off when the door is operated and works fine. The time display is working. The keypad is non-responsive. Please help figure out...


How old is this unit? have you taken it apart?there was at one time a wiring issue with these units,depends on the age.other wise I'd say you have a bad touchpad it was another common issue with this unit. part number 56001263 in white runs around $80

Sep 27, 2009 | Maytag MMV5000 Microwave Oven

1 Answer

How to replace the whole door unit


This should be a fairly simple procedure. To replace most microwave oven doors, all you have to do is open the door as wide as it will open and then lift straight up. The door will come off the hinge mounting pins and lift off. Install the new door by holding it in the open position and aligning it properly on the hinge pins. NOTE: On some models, you may have to remove the upper trim above the door. I hope this helps you. Let me know if you have further questions.

Jan 03, 2009 | Maytag MMV5000 Microwave Oven

2 Answers

MMV5000 keypad is intermittent


You have a stuck button on the keypad.  With the cost to replace the part I would replace the microwave.  Would appreciate a solved rating for expert advice.

Oct 25, 2007 | Maytag MMV5000 Microwave Oven

Not finding what you are looking for?
Maytag MMV5000 Microwave Oven Logo

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...