Question about Canon Printers & Copiers
try to unset your cartridge and place it correctly!!!!
or clean up the cartridge socket
Posted on Sep 18, 2008
Tips for a great answer:
If an error message is displayed on the LCD, take the corresponding action described below.
The following ink may have run out. Replacing the ink tank is recommended. U041 Print head is not installed.Install the print head.U051 / The type of print head is incorrect.Install the correct print head.U052 Some ink tanks are not installed in place. U072 / More than one ink tank of the following color is installed. U071 The remaining level of the following ink cannot be correctly detected. Replace the ink tank. U130 The following ink tank cannot be recognized. U043 U140 U150 The following ink has run out. Replace the ink tank. U163 There are no photos in memory card Contact the support center or service center for ink absorber replacement. Press OK to continue printing Ink absorber full. Service required Timeout error has occurred The device may be incompatible. Remove the device and check the manual supplied with the connected device An unsupported USB hub is connected. Remove the hub. B200Printer error has occurred. See the manual **** Printer error has occurred. Turn off power then back on again. If problem persists, see the manual
Jul 06, 2011 | Canon MG5250 Printer
Oct 29, 2009 | Canon PIXMA MP620 All-In-One InkJet...
Oct 07, 2009 | Canon PIXMA MX310 All-In-One Printer
Nov 06, 2008 | Printers & Copiers
Nov 06, 2008 | Canon PIXMA MP830 All-In-One InkJet...
Sep 08, 2008 | Canon Pixma MP500 All-In-One InkJet...
Aug 15, 2008 | Printers & Copiers
May 15, 2008 | Canon Pixma MP500 All-In-One InkJet...
Nov 14, 2007 | Printers & Copiers
Aug 29, 2007 | Canon PIXMA MP830 All-In-One InkJet...
604 people viewed this question
Usually answered in minutes!