I have one on my workbench right now please check the jumpers you unplugged especially the one on the far left corner (goes to front panel) the one behind the stk 392 010 you replaced (very easy to miss) take good lighting and make sure every jumper is plugged in skip this if your set was working but if it wasnt check the fuses and fusible resistors third if all that fails check your soldering make sure the joints(on the stk's ) are all good and shiny and the joints on the heavier components especially the line output transformer the big black plastic thing on the right of the stk ic you could have loosened it [UNPLUG THE POWER CORD FIRST]
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Its a fairly straight forward repair. i would recomend getting your replacement Ics at the following link, as they provide free instaltion instructions with pictures, free shipping and free online instant messageing when you do the repair in case you need assistance. Heres the link. http://servicemanuals.vstore.ca/
if youre having convergence issues with your samsung HC-P4752W you need to replace both convergence ICs numbers STK392-010 they are available at the following link and they provide free instalation instructions with pics so you can do the repair your self and they also give free tech support in case you need extra help. Its an easy repair takes about an hour from start to finish, Changing the convergence board wont help as the Convergence ICs are located on the sub deflection board and thats about 400 to replace the board compared to 50 to replace the ICs. Heres the link. http://servicemanuals.vstore.ca/
The resistors are 3.9OHM you can get the ICs you need as well as the risistors at the following link. They also provide free instalation instructions and free online instant messageing with a tech when you do the actual repair. If your model is the HC-P4752 you will need two STK392-010 Convergence ICs as well. heres the link. http://servicemanuals.vstore.ca/
Sounds like convergence amp ic's
i dont have any part number for that model. Convergence amp ic bad http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html http://www.hdtvoice.com/voice/showthread.php?t=28929 Or send to ptscorp.com http://www.hdtvoice.com/voice/index.php?s= good luck
please mark the post with a fixya
The colors weren't lining up correctly on my HC-P4752W which is only about 30 months old. I did a little bit of research and got ahold of the people at http://servicemanuals.vstore.ca/ They recommended replacing the IC's as well as the IC resistors. I purchased the replacement parts from their site and made the repairs myself. I should mention that I didn't have any previous soldering experience. The repair was easy and a complete success. You may find replacement parts elsewhere for slightly cheaper but what you won't find is the prompt and detailed customer service that they provide. They gave me there # and said to call if I had any questions before or during repair. I took advantage of their services and got answers every time I called.
One of the convergence output IC's has burned out and needs to be replaced. If the IC opens up inside then it stops working without blowing any fuses or resistors. The IC should be replaced and the set realigned by someone with experience in convergence circuits.