Question about Projection Televisions

1 Answer

SAMSUNG 42" PROJECTION TV

PICTURE IMAGE SEPERATED INTO 2 GHOST IMAGES YELLOW AND BLUE AND BOWS AT SIDES

Posted by on

1 Answer

The timer light flashes when the power is pressed but no picture

Posted on Oct 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue and Yellow ghost image overlying picture.


Replace both of your STK ICs STK392-110 use 150s
Mats has them 1-800-628-1118

May 28, 2010 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Ghost / Overlapping Image


ok you have defective convergence crrection circuit! or maybe the RF Box is defective! can you describe the color of the ghost?

 

Oct 12, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Picture has blue at the bottom and yellow at the top. Double images and the station logo is in the wrong place


This tv have convergence problems.Tries website Tvrepairworld.com to buy the whole refurbish convergence board for the replacement.The Samsung/Akai used the same convergence board.

May 15, 2010 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Samsung HCN4226W "image pinching"


The convergence IC has gone out and is located on the Main bd or the Power supply bd depending on the specific model and must be replaced and a Full convergence alignment must be performed to return your tv to a watchable condition. Only a Samsung trained tech can do this.

Jul 16, 2009 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Samsung SP43T6HCX displaying ghost images


May be it is effected with a virus

Apr 20, 2009 | Projection Televisions

1 Answer

Bows on sides


Try degausing the set with the system software. if this doesnt fix it you will have to degause the set with a professional tool.

Jan 27, 2009 | Mitsubishi VS-55601 55" Rear Projection...

1 Answer

Blue Ghost


you will need to replace 2 stk ic [ parts ] after that the technician will have to realign the picture, sometime also some resistors get bad along with one or 2 fuses

Dec 15, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

HX-P4241W appears yellow. Left and Right of screen are yellow


Yellow is the lack of blue. It can happen when you are running your contrast - which is your overall light level - too high.

Try turning down your contrast. On CRT tech, contrast should always be run at half what the factory allows as full, on the user controls. Full up is what calibrators call Torch Mode, and is NOT the way to get performance to be in the linear operating range of CRT tech.

If your sides are more yellow than your middle, your set may need lenstriping. Mild yellow on the sides is not uncommon, and usually not noticed. But heavy yellow on the sides would indicate that the blue image needs work on white field uniformity.

Yellow is the lack of blue, in CRT tech.


Mr Bob

Feb 02, 2008 | Samsung HC-P4241W 42" Rear Projection...

1 Answer

Hit 53UWX10BA


convergance ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 14, 2007 | Hitachi 57SWX20B 57" Rear Projection...

1 Answer

Hit 53UWX10BA


Check you cable box compared to another tv.  The pisture may need adjusting take off front panle and use the screws to adjust pic  it could get better of worst be carefull

Oct 21, 2007 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...