Question about Memorex Flat Panel Televisions

Open Question

Att uverse need remote code for memorex flat screen 1532, please.

Posted by on

4 Suggested Answers

  • 12 Answers

SOURCE: Programing Remote

1343 or 1005 are the codes - press the TV mode button and the OK button together - the release at the same time - the top row of mode buttons needs to blink twice - then enter the code - the TV button should blink 2 times - try the power and volume buttons - if it worked then be sure to press the ATT mode button again after so you can change the channels

Posted on Sep 12, 2009

  • 1 Answer

SOURCE: need a remote code my new sanyo tv to go with

I went through all the Sanyo TV codes and then started entering in groups of 10. The U-verse offered 1103 i did 1100 to 1110 and it worked with 1107. Unfortunately at&T said you have to check the manufacturer which doesn't list universal codes. I was lucky on the Sanyo 18.5" LCD from Walmart using 1107!

Posted on Sep 13, 2009

  • 5 Answers

SOURCE: sylvania ld320ssx remote code for att uverse

Try 1864. It worked for a Media-Com remote, when none of the other codes worked.

Posted on Nov 30, 2009

SOURCE: need remote code for emerson LC195emx LCD TV

hi! i have here a couple of codes for your emerson tv. you could try them 0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037 hope it would work! goodluck!

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have AT&T uverse and a 42" Emerson


ATT Uverse remote doesn't work well with Emerson TVs.
Most will turn off with the correct code but NOT ON.
Find the code that will turn OFF the Emerson TV.(volume should work too)
When you want to want to turn ON your Emerson TV Try This (Believe it or not)
Wave ATT Remote slowly and press ON in mid wave. The ATT remote on frequency must be slightly off. This works every time for me now that I know the secret. Remember Doppler Effect from High School Physics.

Jan 09, 2011 | Flat Panel Televisions

2 Answers

Trying to program Uverse remote for Emerson 32 flat screen


i install uverse, the auto seek is done by hit and hold TV and OK. wait for lights to flash enter 900 and push play over and over SLOWLY and when the tv turns off, press enter.

NOTE: some tvs WILL NOT program to our remotes

Jul 04, 2010 | Emerson LC320EM9 32 in. LCD HDTV

2 Answers

Need Viore code for ATT-U-Verse remote.


I tried every code suggested for my Viore with Uverse and nothing worked. Finally decided to reset the remote to factory settings using code 900 as described in the instructions from ATT uverse. The remote now works on my Viore tv and all I did was reset the remote to factory settings.

May 17, 2010 | Toymax Viore 42 in. Plasma TV

2 Answers

Sylvania ld320ssx remote code for att uverse


Try 1864. It worked for a Media-Com remote, when none of the other codes worked.

Oct 06, 2009 | Sylvania LD320SSX LCD TV

3 Answers

Uverse remote codes?


uverse remote control user guide pdf shows 346 but requires a 4 digit number.

after some trial and error, 1346 worked for me.

Sep 12, 2009 | LG 42PC3D 42 in. Plasma Television

1 Answer

Att uverse remote won't work with other devices


Yes you have to use the recommended Uverse codes, and follow the directions to enter the code. Hold the tv button down, on the Uverse remote, then with it stil held down add the OK button, let go of both, then you will see the lights at the top of Uverse remote light up, it is then ready to accept the code, it will be a four digit code, Go to helpme@att.net, and look under TV, then programming the remote is there. Put remote Code in the att search box if you can't find it.

Apr 04, 2009 | Flat Panel Televisions

4 Answers

Not able to program vizio remote towork with att uverse Cisco box


Hi,
Maybe too late for you but ATT just gave me a code that works with my Vizio plasma. Code is 1343. Even the mute works correctly. They gave me some others to try but I didn't need them. Other codes were 1018, 0030 and 0056.

Mar 19, 2009 | Vizio VO47L 47 in. LCD TV

3 Answers

Programing Remote


Most Polaroid flat-screen TVs won't program to the Uverse remotes. Try buying a different universal remote that shows coding for both Uverse and Polaroid.

Apr 19, 2008 | LG 47LC7DF 47 in. LCD HDTV

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Memorex Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68258 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Memorex Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...