I bought a Lexmark printer all in one x3580 . I ran the disc to install the programmes on my dell computer. When i tried to test it, it keeps saying can not communicate with printer. I've run the program a few times, checked firewall, which seems ok, not blocked.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try downloading and installing the printer driver from the Lexmark website. Please visit the Lexmark website at http://bit.ly/e8EeXn and enter your model number, then hit Select. On the next page, select your operating system
> click on "FILTER" > click on the driver under Recommended
Downloads > download and execute the file. Simply follow the instructions on
your computer screen to complete the installation.
Try to download and install the X3580 printer driver from the Lexmark website. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation. I hope this helps. Thanks.
first is you have to make sure your new lexmark printer is connected properly to your New Computer, and grab some Disc Utility of your new lexmark printer and install it, but before you install just to make sure your new printer is turn-off. Then follow the instruction & procedure which appear on your screen, install all necessary programs and drivers to make sure your printer is working. After that restart your computer & turn-on your new lexmark printer. Good luck!
In this case as u said you have already called Lexmark Tech Support what i would request you to do is go ahead and click on start go to all programmes go to Lexmark X1200 Series and click on Uninstall after uninstallation it will say to restart the Computer.........................
After Restarting the computer click on the following link:
http://downloads.lexmark.com/perl/downloads/downloads.cgi Select your Operating System and Download the drivers from the website.........Install the downloaded drivers and the software........Try this it will work........Good Luck....