Question about Panasonic KX-TG1033S Cordless Phone

1 Answer

KX-tg1034S Need assistance in how to record the outgoing greeting.

Posted by on

1 Answer

Use the record button on the base.

Posted on Sep 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I retrieve a deleted outgoing greeting? My husband passed away and it was his voice on the greeting. Please tell me how I can get it back?!!?


Knowing the importance of this specific case I would highly recommend calling the factory and having the read the chip (s) and retrieve the data aside from that there's no other way for a consumer to retrieve lost greetings unless you might have had it pre-recorded somewheres just in case he wasnt there and you needed to reset up your answering machine. Hopefully this helps. Sorry for your loss by the way .

Dec 21, 2015 | Panasonic KX-TG2356 Cordless Phone

1 Answer

How do I record an outgoing message on my KX-T7730 PHONE


998 gets you into settings, 5 gets you into message settings, then 1/3 are the company/custom greetings, it should tell you what to press for which one you want to access.

Mar 04, 2015 | Panasonic Phones

1 Answer

How do I record new greeting on panasonic's KX-TD7685


The KX-TD7685 isn't an answering machine.

To record a greeting on your answering machine, please refer to the manual for the answering machine. If you require further assistance, please reply to this post and specify the make and model of your answering machine.

May 23, 2014 | Siemens Gigaset 8825 Cordless Phone

1 Answer

I have recorded an outgoing message. However, at the end of the new outgoing message an old obsolete outgoing message starts to play. How do I get rid of the old outgoing message?


Hi,
You will need to remove the old message. There SHOULD be prompts. IF NOT try going to a very quiet room and hit record but do not say or make noise and this will record silence over the old and new message. Then attempt to retry.
ALSO - look for a 'reset' button and remove all batteries if you have power outage back up batteries.
Unplug the phone - and try again.
Here are the instructions from the manual:
To Change Your Personal Greeting:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. Press the ADMIN softkey
4. Press the GREET softkey
5. Press the REC softkey
6. Press the PRIME softkey
7. Press the YES softkey
8. At the tone, record your new greeting, press the OK softkey to end your recording and then the OK softkey again to accept the new recording

Best of it
Gary @ Fix Ya

Jul 20, 2011 | NorStar M7324 Telephone

1 Answer

My voice mail doesn't record but the outgoing greeting keeps on repeating?


try deleting some recorded messages, your memory might be full

Dec 24, 2010 | Panasonic KX-TG4500 Phone

1 Answer

I have a panasonic kx-tg1034s phone system and cant get the


Hi,

You can download the complete instruction manual in PDF format by clicking this link.

For additional information, features and specifications, click here
  • You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/
Hope this solves your problem. Thanks for using FixYa.

Apr 08, 2010 | Panasonic KX-TG1034S Phone

1 Answer

How do I change the outgoing message on my Uniden 6.0 1580??????? Digital answer machine.


Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a
call: “Hello, no one is available to take your call. Please leave a message after the tone.” You can record your own
personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 8 to start the recording. The system announces, “Record greeting.” Begin recording after the
announcement.
When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recorded
greeting plays back for you.
Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 6. The system plays the current greeting.
To keep this greeting: Do nothing..
To switch to the other greeting: Press 6 while the system is playing the current greeting.
Each time you press 6, the system switches between the pre-recorded and the personal greeting. The last
greeting you hear is used as the current greeting.
Deleting Your Personal Greeting
You can delete your personal greeting from the base. You cannot delete the pre-recorded greeting.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 6. The system plays the current greeting. Switch to your personal greeting if necessary. (See the previous
section to switch the greeting.)
While the personal greeting is playing, press 4.
The system announces “Greeting has been deleted,” and switches back to the pre-recorded greeting.

Cheers!

Feb 14, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

I can't remember how to record my outgoing message ?


here you go...

Recording your greeting
message
You can record your own greeting
message (max. 2 minutes and 30
seconds). If you do not record a
greeting message, a prerecorded
greeting message is used.
1 {MENU}
2 {V}/{^}: “Answering devicei
{OK}
3 {V}/{^}: “Record greetingi
{OK}
4 After the handset beeps, speak
clearly about 20 cm (8 inches) away
from the microphone.
5 To stop recording, press {OK}.
6 {OFF}


If this helps you solve it, plz rate this fixya. Thank you kindly.

Feb 01, 2009 | Panasonic (KX-TG1032S) Phone

1 Answer

Trying to change our company greeting


When you record it, you press 1 immedately to stop recording. From there it will say press 1 to review and 2 to accept or 3 to record again or something like that. You need to select 2 to save.

Carl

Nov 21, 2008 | Panasonic KX-T7731 Corded Phone

Not finding what you are looking for?
Panasonic KX-TG1033S Cordless Phone Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...