How to remove the letters RX near the battery so u can talk to another person
It's a Uniden hand held receiver model-uh043sx-2
The Rx symbol indicates that someone else is using the channel, which, (if your radio is working correctly) means you should be hearing them, if this is the case then there is nothing you can do to change that, because only one person at a time can use the channel at a time, however, as we\'re talking about CB radios, that is not always the case, dependant on the make and model of the radio in use.
In the case of your radio, not much can be done, as that is a factory default setting, so you can\'t override this without getting into the unit and risk stuffing it up period.
If you know someone in the 2-way radio game i.e,. a radio technician, or radio amateur, they could help, otherwise you can\'t do much about this.
If this is a real problem for you, then getting a bigger 5 watt radio could be an answer, as these are normally set by default to allow you to override the Rx when you Tx.
Note: Don\'t buy a Chinese made unit, as these are not reliable, nor stable units for Aussie use, I found this out when I purchased an Oricom CB... Absolute crap, cheap and nasty. Be aware of where radios are made, regardless of brand name.
I hope I have been of assistance.
Feb 16, 2012 |
Uniden Two-Way Radios