Question about Toshiba 57H81 57" Rear Projection Television

1 Answer

I hove a vertical problem

I have a half picture

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

In vertical section change all electrolytic capacitor there,an resolder the 7 or 8 pins vertical IC and resistor associated to the IC pins.Post whatever the result.

Hope this may help you;

Regards,
VOTIT

Posted on Sep 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only half of my screen shows a picture, the other half is black. It is not a split screen, half of the picture is missing


You have a problem with the vertical IC. Or someone typed into the software and hit a service blank option..Cances are better that you have to resolder the vertical IC. This is a projection TV...correct?

Feb 14, 2010 | Projection Televisions

1 Answer

Sony KP53V15 picture is half on top and half on bottom - what could fix this?


Do you mean it's blank in the middle or blank top and bottom.

Either Vertical o/p problem or cc (closed caption) is on

If cc - check on screen display to turn off cc.

if Vertical o/p read below-

This is an easy repair if you've ever soldered and would not be too costly for a repair shop to do it for you. The problem is a bad Vertical Output IC (usually mounted on an aluminum heat sink with the part on it labeled LA78?? ) and 1 or 2 bad capacitors. Some times you can even fix the problem by re-soldering the contacts of the IC- To find the IC follow the 4 wires that come from the Yoke (which is a contained coil of wires slipped over the neck of the picture tube(s)) back to the board. 2 of the wires go to the horizontal o/p and 2 to the Vertical o/p the thinner gauge wires are for the vertical.

Sep 22, 2009 | Sony Projection Televisions

1 Answer

Hdtv picture has turned half black, with vertical lines in the middle of the tv


Sounds like you could possibly have some bad capacitors in the vertical circuit

Jun 11, 2008 | Projection Televisions

1 Answer

Sony Trinitron Top Half picture blacked out


You could have a bad capacitor 35v 100uf ,1uf 50v ,VERTICAL ICs have 7-11pins depends on which one you need LA7830-or 7833,7835,7836,7837 7838 make sure you get correct part.
ThankYou for using FixYa. Have a Nice Day

Feb 07, 2008 | Samsung HCM4216W 42" Rear Projection...

1 Answer

Vertical blanking


CHECK C2C52 10 UFD @ 50 V OFF THE BASE OF Q2C51 ON THE SIGNAL PCB. 2. CHECK C2P05 100 UFD 16 V OFF PIN 3 OF IC2P01 AND IC2P01 PART # 270P466020 (9-VOLT REGULATOR). BOTH ARE ON THE SIGNAL PCB.

Dec 06, 2007 | Mitsubishi VS-60705 60" Rear Projection...

2 Answers

Vertical lines on one half the screen


Sounds like Light engine sizzle noise makes me think color wheel.

Nov 18, 2007 | Samsung HLN467W 46" Rear Projection HDTV

1 Answer

DLP TV: Left half normal, vertical 6" band center is gray, right half almost black. What's wrong?


No. The optical engine is OK. You need an adjustment in the light tunel. Call a tech to do it.

Nov 06, 2007 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

I have a Mitsubishi VS-60.. With a Picture


Vertical IC outputs , vertical Capacitors are most like the culprit on your deflection panel. good luck

Aug 16, 2007 | Mitsubishi VS-50501 50" Rear Projection...

Not finding what you are looking for?
Toshiba 57H81 57" Rear Projection Television Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...