Question about Audio & Video Receivers

2 Answers

Cd player has a 3cd turntable type arrangement. a cd was not properly placed in holder and then it was closed. the player jammed . after it was released the cd player doesn't work. "error" comes up on the cd player screen

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 199 Answers

Some models have a recessed button for the systems reset. check if your receiver has got one and press on it. you can also unplug for an extended period (maybe 1 hour or more). Still others would reset if you press on the power button while plugging in and holding for 5 seconds.

The are various ways of doing a reset depending on the unit.

Posted on Sep 18, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 97 Answers

Generally all cd players have a emergency eject pin hole...

Have u checked out that??

Posted on Sep 18, 2008

  • Ganeshkumar Arumugasamy

    I think the lens wuld have got damaged.



    Can i know the brand and model of the CD player??

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a brand new emerson 3 speed record player, amfm radio, cd player combo. I am having trouble with the turntable rubbing even after we tighten the shipping screw down


Shipping screws are used the hold down the turntable during shipping.
These shipping screws need to be removed after shipping and installation.

Nov 19, 2012 | Emerson 3 Speed Vinil Classic Lp Turntable...

1 Answer

I have a new set up and i need a step by step instruction on how to set up the mixer to the amp and the decks to the mixer/amp


if this is a dj type set up, the mixer should have a main output (RCA or XLR), that is what you connect to the input on the amp, each deck should have RCA outputs, depending on if they are turntables or cd players, plug the turntables into the phono channel inputs on the mixer and if they are cd players, plug them into the line inputs on the mixer

Mar 28, 2011 | Audio & Video Receivers

1 Answer

I expected that the RCA leads from my turntable would just plug into the back of the RCD-W500C, but the manual indicates a somewhat complex cabling arrangement through the amplifier. I have not been able...


Your new cd player/recorder is a "component piece" as is your turntable,cassette player, reel to reel or CD player. Connect it as you would any other component piece of stereo equipment. Set up your recorder to "record" in real time(not high speed or synch record). Your tape recorder records anything that is playing through your reciever to your speakers. So, treat your "CD" recorder as you would a "CASSETTE TAPE" recorder. Play your vinyl record on your turntable and record to CD on your CD recorder ! Pay special attention to the dubbing speed, you will not use "synch or high speed !! Good Luck

Feb 26, 2011 | Audio & Video Receivers

2 Answers

Phono plays lower in volume than cd and tuner. Sounds ok i guess but is about a quarter to one third lower in volume. Is this normal ? Can I plug phono into cd jacks to check if any better ?


Hello. As per the post before me, if you have a receiver with a Phono input(many receivers don't have one anymore) the output of a phono cartridge is around 30 millivolts, vs 300 millivolts for a CD(10 times the amount) or any other line level device. A Phono preamp, also has RIAA(recording engineering standards)Equalization that provides the proper equalization for a Phono cartridge. As per the other post, yes, it will sound very low, and unnatural sounding. If the input you are plugging the turntable input into, doesn't say Phono, you can purchase an inexpensive Phono preamp made just for this very issue. You can try Radio Shack, or find something of better quality on the Internet.

Regards,

Dave

Jan 11, 2010 | Pioneer VSX-453 Receiver

2 Answers

Can i use a turntable with the sony str dh500 model? I am illiterate when it comes to hooking this stuff up. Planning to purchase this model only if I can hook up my record player as well as my cd player.


This particular unit only has 2 line level inputs for audio devices. You can use 1 for the CD player and the other for the Turntable. Please note that you will need a phono pre-amp for the turntable as the inputs on the receiver are line level. The preamp will amplify the phono level to line level.

Dan

Nov 17, 2009 | Sony STR-DH500 A/V Receiver

1 Answer

CD jammed inside player


Remover the player's cover. That will give you access to the player's internals and therefore also the CDs. That is the only way to go about a problem like the one you are facing.

Disconnect the player from the mains supply before doing this.

Good luck.

Nov 09, 2009 | Technics SA-AX530 Receiver

1 Answer

Turntable problem


It could be a couple of different things.

Do you get any sound, even very faint, if volume is turned up all the way?

If so, you probably have the turntable connected to the wrong type of input or you have the wrong type of turntable for the type of input you have on the receiver.

Older turntables have a very, very low level of audio output which requires an input that has much more gain than the normal type of audio input on a receiver.

Many newer turntables and receivers has the same level phono inputs and outputs as the other inputs and outputs of the receiver like the CD or Tape I/O. When an older turntable with such a low level output is connected to this type of phono input the sound is so low you can only hear it very faintly with the volume all the way up.

If you have the proper type of turntable for the type of input on your receiver, then the problem is most likely in the turntable. To check if it is or not, disconnect the turntable from the receiver, and then connect an RCA cable to the receivers phono input with nothing connected to the other end. Then with the volume turned up just about 1/4 to 1/2 the way up, touch the ends of the male ends of the RCA cable that are not connected to anything with your finger lightly tapping it a few times. You should be able to hear the tapping sound real easy in the speakers. If you hear that noise you know that the receiver is OK. If you don't hear anything the receiver has a pre-amp problem or the receiver is not set to the proper function.

If you determain the receiver is working normal, you have a problem in the turntable. Most times it is the stylus or the wires connected to the cartridge which holds the stylus.

Another thing to check is that if your turntable has a ground wire coming off the back of it near the RCA outputs of it, make sure that it is connected to the chassis of the receiver. Most receivers have a ground terminal right on the back that you can loosen with your fingers and then put the ground wire from the turntable in there and tighten it hand tight. If it has no ground terminal on the receiver you can always just loosen a screw on the back and connect it there. Make sure the ground wire has the insulation cut back to expose the bare metal, that insures that you have continuity from the ground of the turntable to the ground of the receiver.

If your turntable has no ground wire, then you have a newer turntable type that would be able to plug into any of the audio inputs on the back of the receiver. It would be a turntable with a boosted signal that can only be connected to an input with the same level as the CD or Tape input.

I hope this helps you to figure out what your problem is, if you need more help don't hesitate to reply to this post. I will get back to you as soon as I am able.

If this was helpful for you a "FixYa!" rating would be appropriate and very much appreciated, after all, it is the only reward we get for helping people like yourself for free.

Thanks,

Dave


Sep 06, 2008 | Yamaha RX-V995 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...