I have a flm-1511 problem...my tv had no sound but had picture.. so i thought it was the satalite so i did a reset still no sound..so i went to the tv and did a factory reset and now i cant even get a picture or sound. just white snow....any help?

if your tv has compatible ports

Tries unplug,replug tv and pay boxes back like about an hour later.Now tv and cable or satalite boxes are resetting itself back to the tv factory setting and cable or satalite boxes by rebooting and those pay boxes and updating it softwares.Now the the tv should work right again.If not call ur pay tvs providers get a another pay signals boxs.

right click on your desktop / display properties (mine is nvidia display properties)
There should be settings there to set up multiple displays.
You may need to find display properties from control panel

Recommend you verify where the video plug is inserted in rear of TV, there are video in and video out. If you have audio going in from cable/sat box, but video going to video out (instead of in), this could create the situation you describe.
Also make sure you are on the correct 'source' setting if you are using Video, etc.

Thats because your TV is not high definition and cannot process the high def signal. serial hook up does not give a highh def signal.


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

I think your power supply is (1) over heating (2) failing.

a

Do you have to turn it back on with the remote after this?

If so, then you may have set a timer by accident through the menu system.

More information would be required.

I had the same problem. In the menu, the image button was grey, and could not be hi-lighted, and the screen stayed blue. I was using the AC power cord. I plugged in the DC power cord instead, and it "woke" the unit up. I switched back to the AC power and it works fine. If you don't hve the DC cord that came with the TV, try andy 12 volt dc output cord with a positive tip.

u have bad caps look at the tops theyll be bubbled up

ok " your tv monitor has a remote, look on the remote and push the input button .

also make sure video cable for ps2 is pluged in to the tv video
input plug, female RCA plug should be yellow