Question about HP PSC 2210 All-In-One InkJet Printer

1 Answer

I accidently changed the language now its in dutch i think

How do i get it to reset to english?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Hi,

Troubleshooting steps to be Followed

Setting the front panel language on the HP PSC 2200 series To set the language and region, follow the steps below:

  1. On the all-in-one front panel, press the Setup button five times, and then press Enter to access the Maintenance settings.
  2. Press the number 5 on the front panel numeric keypad, and then press Enter to access the Language and Region settings.
  3. The available languages will appear in the display. Press the Right Arrow (>) button to scroll through the available languages. Enter the two-digit code for the desired language based on what is listed in the display (example - 11 for English, 12 for Spanish, and etc.).
  4. Confirm the selection by pressing the number 1 on the numeric keypad of the all-in-one. Press 2 to cancel the language and try again.
  5. The available regions will appear in the display. Press the Right Arrow (>) button to scroll through the available regions. Enter the two-digit code for the desired region based on what is listed in the display.
  6. Confirm the selection by pressing the number 1 on the numeric keypad of the all-in-one. Press 2 to cancel the region and try again.
The front panel language does not set correctly There can be a problem if the front panel cover (bezel) is not installed correctly. If the language cannot be set or is still wrong, do the following:
  1. If the software has not been installed, install it.
  2. Remove the control panel bezel. This may require the use of a coin or small screwdriver to carefully pry up the cover from the back (near the display).
  3. Reinstall the front panel bezel as shown in Figure 1. Be sure the bezel is firmly seated and that all of the buttons can move freely. Figure 1: Installing the front panel bezel I accidently changed the language now its in dutch - c00224430.jpg
  4. Set the front panel language following the steps above.

Posted on Sep 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Language problem accidently changed the language to i think is russian and now i cant change it back to english.


Go to settings and scroll down and see if you can find English. I did this on mine a while back. I had to go to the internet and look up my model and instructions and then where to find settings / languages and then see what buttons to press and count how many languages down the list to find English. Alternatively, go to google translations. It can tell you what the words are in English to Russian.

May 26, 2015 | Printers & Copiers

1 Answer

Hello i have my machine Ir 3530 i want to change the language from dutch to English


Dear
go to COPIER > OPTION > BODY
<Adjustment method>
XXYYZZAAXX: Country (UP), YY: Language (ja), ZZ(00) Destination,
AA(00): Paper size type
The display contents conform to the display method of
(COPIER>DISPLAY>USER>LANGUAGE). Enclosed in the brackets
are defaults. The country and language are only displayed.
<Operating procedure>
1) Select <CONFIG>.
2) Select an item to reverse its display. Then press the + or - key to change
the contents.
3) Each time the + or - key is pressed, the contents change sequentially.
4) Display the intended contents at all items and press the OK key.
5) Turn the main power switch OFF and ON.

thanks.

Jan 29, 2015 | Canon CANNON IR 3530 COPIER FOR 220 VOLTS...

1 Answer

Change language from dutch english


Uninstall the printer and scanner software, disconnect the printer from the computer, then reboot your machine.

Once rebooted, insert the installation disc and follow the instructions (Make sure you choose the english language installation). Hopefully, when installation is complete, everything should be in english.

If not, go to brother.com and download the english installation for your printer, then follow the instructions above.Still having Problem Then follow Us For:
Brother Printer Support

Mar 06, 2014 | Brother Printers & Copiers

1 Answer

Change language


power off then power on when memory starts counting up press and hold ok button until all three lights stay on release button find language then arrow up or down until english appears and press ok button

Oct 22, 2013 | HP LaserJet P4015N Printer

2 Answers

My new printer is coming up all in Dutch because I


Cycle through the 'setup' menus on the panel on the printer, to find the "choose language" function, and select "English".

Mar 26, 2010 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

I can not print, the error is: LANG=ENGLISH, please help


Changing the Control Panel Display Language

The default control panel display language is set for English.
Supported languages are: English, French, German, Italian,
Spanish, Finnish, Danish, Dutch, Swedish, Norwegian, Turkish,
Polish, and Portuguese. Follow these instructions to change the
display language.

1 Switch OFF the printer.
2 Press and hold Select while switching the printer ON until
SELECT LANGUAGE appears in the display.
3 After the power-on self test, LANG=ENGLISH appears. Press
[Value+/-] until the desired language appears in the display.
4 Press [Select] to save your choice. An asterisk (*)appears next
to the language to indicate it is now the default.
5 Press [Go]. The On Line indicator is lit, and display messages
are now in the language you selected.

Sep 21, 2009 | HP LaserJet 4 plus Printer

1 Answer

Language problem


right click on the task bar goto toolbars in that select language bar .then after getting that toolbar in ur taskbar by clicking on that u can select the required language from the displayed list

Nov 30, 2008 | HP LaserJet 3030 All-In-One Printer

1 Answer

Change the langauge


COMO PUEDO PONER EN ESPAñOL EL LENGUAJE DE LA DP 2570? Y QUE DEBO HACER PARA MEJORAR EL CONTRASTE EN EL DISPL<Y?

Feb 26, 2008 | Toshiba DP2570 Printer

Not finding what you are looking for?
HP PSC 2210 All-In-One InkJet Printer Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...