Question about Mitsubishi WS-55613 55" Rear Projection HDTV

1 Answer

Blinking green light, will not power up

Suggestions on fixing this problem I have the same problem with my Mitsubishi WS-55613 TV. The blinking green light keeps flashing and I cannot turn the TV on. When I unplug the TV the light goes out and when I plug it back in the green flashing light comes on again. We have tried to reset the TV and nothing has changed.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My 55613 tv wont turn on just blinking green light

Posted on Sep 19, 2008

6 Suggested Answers

  • 2 Answers

SOURCE: Blinking green light of death

First thing you want to try is plug it directly into the wall to see if your surge protector is not allowing the proper voltage. If that works. Go buy a UPS.

Posted on Oct 14, 2008

  • 157 Answers

SOURCE: I have a mitsubishi model #ws-55613. It will not turn on. The

YOU HAVE CAP BAD IN THE DM MODUAL 4 MAYBE 5 1000UF@16V REPLACE WITH 1000@25V .

Posted on Sep 29, 2009

  • 1694 Answers

SOURCE: mitsubishi ws-55613 55in.

Four bad capacitors in DM module = common repair for
qualified Mits tech.......................T.

Posted on Nov 22, 2007

  • 1694 Answers

SOURCE: Blinking Green Light

Ready to copy?? The solution is replace four bad caps in DM
module 1000mf /25v high temp 105 degree.........details @
www.Chris@ChrisAndNat.com.........................T.

Posted on Nov 23, 2007

techman
  • 3130 Answers

SOURCE: Mitsubishi model WS-55613 screen goes off and on

there is a 9 mvolt regulator on the signal board right behind the input board. that could need resoldering or maybe replacing it should be the IC9A05

Posted on May 04, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a sharp aquos tv model lc-32m400x. When i turn the power on via button at the back the green light comes on for about 10secs then turns to red and flashes about every 11/2 - 2secs. Any ideas.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 11, 2017 | Sharp Televison & Video

1 Answer

My tv cuts on but flashes red light 5 times and shuts off


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 10, 2017 | Televison & Video

1 Answer

I have a 60 inch sony tv that have a red flashing on the lower left side,no picture when I turn it on and there is ringing sound.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 09, 2017 | Sony Televison & Video

1 Answer

Insignia NS-51P680A12 TV won't turn on. I have a blinking light that I am sure is a trouble code, but I can't find the codes anywhere online.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 09, 2017 | Insignia Televison & Video

2 Answers

I have a Sony LCD Digital Color TV Model KDL-40S5100


try this --as you are wasting time and will eventually waste money---take it to a repair shop for a proper diagnosis and quote

Jan 08, 2017 | Sony Bravia KDL-40S51009 40 in. TV

1 Answer

I have a lg tv 60 inch tv ln5600 when powering on red stand by light blinks 3 time then no light pic or sound not backlight and no image when using flashlight treid replacing power board does same


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 08, 2017 | LG Televison & Video

1 Answer

My sony wega kf-50E200A tv keeps turning off. during each cycle the green light blinks 42 times and the tv comes on again for about 3 minutes and it happens all over again


More than likely the power supply is defective, but without testing and the repair manual that is just a guess, you make the decision to replace or repair the TV.

Jan 07, 2017 | Sony KF-50E200A TV Lamp with Housing

1 Answer

Sony bravia shuts off


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Aug 30, 2014 | Televison & Video

1 Answer

No Video Or Sound - Stand By Light Flashes 5 Times


If the tv was made before December 2008, there is a capacitor settlement from a class action lawsuit by Samsung. Supposedly (at no charge) they will send a repairman to replace the capacitors.

Nov 27, 2013 | Televison & Video

33 Answers

TV just flashes different colors


You have entered a diagnostic colour test. With the TV powered on, hold the 'Menu' & 'Enter' together, then press the power button. Problem resolved

Jun 25, 2006 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
Mitsubishi WS-55613 55" Rear Projection HDTV Logo

2,332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

71039 Answers

Jaime Hernandez

Level 3 Expert

2272 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...