Question about PC Desktops

Open Question

Can't pass activate page error message 8813 activation id does not match product selected. please verify activation id and re-install

Posted by on

  • lamontsing1 Sep 18, 2008

    The program is rosettastone ver 3.2.11A

    Tried to go back and change language because of errror and then had screen that kept prompt would you like to remove this program and would not let me further. waited 1 week and tried to get past activate page and it said activation does not match the product, please verify id and re-install. Can't go further.

    Can't reach rosetta stone, on hold for over an hour in each mode

  • Steven Brown May 11, 2010

    What is the name of the program generating the error ?

×

5 Suggested Answers

creativemind
  • 133 Answers

SOURCE: error message

The most common cause of this issue is not restarting the computer following the installation of Internet Explorer 7. It seems that if you do not restart Windows immediately after the installation has completed, it causes some side-effects, particularly the error you describe. This may not have been your fault, as the Internet Explorer 7 update may have been automatically downloaded and installed from the Windows Update website. After the update was installed, and you were prompted to restart, you might have elected not to restart (as you did not realise the implications of such) and thus now the program does not work correctly. In this case, the workaround for the issue is to uninstall Internet Explorer 7, through the “Add/Remove Programs” control panel, and then reinstall Internet Explorer 7. Make sure you restart the computer once the installation has completed!

Apart from reinstalling Internet Explorer 7 I was unable to find any other workarounds for the problem. Some users have reported having to reinstall Windows, but this is only in extreme cases. In the worst case, you may have to just uninstall Internet Explorer 7 and go back to using Internet Explorer 6. However, I imagine you might like the new Internet Explorer 7 features such as tabbed browsing. Should this be the case, and you are unable to resolve the problem with Internet Explorer 7, perhaps another alternative is to try Mozilla Firefox (http://www.mozilla.com/firefox). This is a very popular free open-source web browser, with many of the same features (tabbed browsing, RSS integration, etc.). This could be a useful compromise if you are still unable to get Internet Explorer 7 to work correctly.

Posted on Mar 25, 2008

  • 3940 Answers

SOURCE: windows vista activation problem

that code says the Microsoft has that key recorded as already being in use.

Posted on May 16, 2008

  • 13433 Answers

SOURCE: My copy of DVD X

The proxy Id is coming up possibly becouse the program has no access to internet. I recommend you try the phone activation, have you called the number? the phone support should sort it out with you.

let me know how it goes.

Posted on Aug 13, 2008

clark_styx
  • 282 Answers

SOURCE: My copy of DVD X

jsut write to support company
http://www.xcopy-intlsupport.ca
just fill up the form and submit it

Posted on Aug 13, 2008

leecom72
  • 4806 Answers

SOURCE: with regards to the product

if you are working on vista you must remove the UAC control in the users window, it will ask you to restart the computer and you should be able to access your work, plus you must take ownership of the files


regards

Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Customerserv@safecart,com



A registered version of Malwarebytes' Anti-Malware will display partial licensing information. An unregistered version will show a "Purchase" button and a "Register" or "Activate" button near the bottom of the product. To register and unlock the PRO features successfully: For activation you need internet connection. Locate the ID and Key in the box-CD-card or from your order confirmation email. Click on the "Register" or "Activate" button. Write EXACTLY like they are (or Copy and paste from email) the product ID and Key into the text fields. Click on the "Register" or "Activate" button under the text fields. Available check boxes: Enable protection module: This option will enable the realtime Protection Module immediately upon successful registration. Keep protection up-to-date automatically: This option will automatically create a daily update entry in the Scheduler to keep protection up-to-date upon successful registration. Note: In our license info (ID and Key) we don't use the letter O , only the number 0

Mar 17, 2013 | PC Desktops

3 Answers

My copy of DVD X Copy Xpress version 3.0.2 bought from Harvey Norman in Bundaberg Queensland 4 years ago loaded but will not activate, I tried by phone and a window came up requiring a different pass word...


The proxy Id is coming up possibly becouse the program has no access to internet. I recommend you try the phone activation, have you called the number? the phone support should sort it out with you.

let me know how it goes.

Aug 13, 2008 | PC Desktops

Tip

Change the Product key on a Windows XP without re-installing it


  • Click Start, and then click Run.

  • In the Open box, type Regedit, and then click OK.

  • In the left pane, locate and then click the following registry key: HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\Current Version\WPAEvents

  • In the right pane, right-click OOBETimer, and then click Modify.

  • Change at least one digit of this value to deactivate Windows.

  • Step (6) Click Start, and then click Run.

  • Step(7) In the Open box, type the following command, and then click OK. %systemroot%\system32\oobe\msoobe.exe /a

  • Click Yes, I want to telephone a customer service representative to activate Windows, and then click Next.

  • Click Change Product key.

  • Type the new product key in the New key boxes, and then click Update. If you are returned to the previous window, click Remind me later, and then restart the computer.

  • Repeat steps 6 and 7 to verify that Windows is activated. You receive the following message:Windows is already activated.

  • Click OK to exit.

on Aug 07, 2011 | PC Desktops

1 Answer

I have netflix and i keep on getting this message everytime i try to watch a movie: The Netflix Movie Viewer requires ActiveX to be enabled. Please verify in your Internet Explorer security settings that...


If you are using Internet Explorer as your browser, you can enable active x by going to TOOLS> INTERNET OPTIONS> SECURITY TAB>

On the Security tab, click on Custom Level then enable active x.

you can visit this link for screenshots.
hope this helps.

http://help.yahoo.com/l/us/yahoo/mail/yahoomail/settings/settings-28.html

~josh

Aug 15, 2011 | Dell Dimension 2400 PC Desktop

1 Answer

How to enable active x on windows xp


Active X controls can only be enabled or disabled individually because the active x controls are blocked automatically by windows xp. If you have an individual Active X control there are two options you can choose. Allowing Active X Controls with the Information Toolbar. 1. If you want to allow a particular active X to run, click the message on the Information Toolbar that appera on top of the page in the Internet Explorer browser and select Install.
Enabling/Disabling Active X Controls from the Manage Plugins option in Internet Explorer.
1. In Internet explorer Click on the Tools option on the main toolbar.
2. From the drop down menu select the Manage Plugins option.
3. Select the publisher or name of the Active X Control to highlight it.
4. At the bottom of the window under 'settings' click the Enable or Disable radio button to obtain the result you desire.

Dec 06, 2010 | PC Desktops

1 Answer

I want to install Kaspersky Anti virus


iKaspersky Anti-Virus 2010 It is recommended to close all applications before the installation.
Before you begin to install Kaspersky Anti-Virus 2010 on your computer, make sure that you have removed (uninstalled) your previous antivirus software.
If you are installing using the Kaspersky Anti-Virus 2010 CD, please skip to Step 2. If you have purchased your software online, follow Step 1 to download it.
Click the download link provided in your order email to begin the download process. You will be asked to Run, Save or Cancel the download. Click Save.
  • The web browser will ask you where to save the file. Select where you want to locate the file and click the Save button.
  • The download process will begin, and depending on the speed of your Internet connection can take up to an hour.
  • When the download completes, click Run.
  • You may receive a warning that the publisher could not be verified. Click Run.



421cd2b.gif
Step 2 - Install Process:
  • You will briefly see the install process copy the installation files to your computer. Wait for the process to finish.
  • The install process will check if there is a newer version online and download it if needed.
  • Wait a few seconds. The Setup Wizard will open.
  • In the welcome window of the Setup Wizard you can choose one of the following types of installation:
    • Express installation - full program installation with recommended by Kaspersky Lab experts settings (Custom installation in the left lower corner is not checked).
    • Custom installation - installation with the possibility to choose which program features to install (Custom installation in the left lower corner is checked). You will be able also to activate the application by special wizard. It is recommended for advanced users.
  • In order to start the Express installation click the Next button.
  • Read the license agreement. If you agree with all the terms, then click the I agree button. The installation continues. In order to stop the installation click Cancel.
  • The Setup Wizard offers to participate in Kaspersky Security Network. If you participate in the program, then Kaspersky Lab will receive information about new threats, detected on your computer, system information and send unique identification which is specified for your computer by Kaspersky Anti-Virus. Your personal data is not collected. Read the Data Collection Statement about using Kaspersky Security Network. If you agree with all the terms, check I accept the terms of participation in Kaspersky Security Network. Click the Install button. The installation continues.
  • The install process copies files and adds registry values. Wait until the process completes.

You may see the following notification from the Windows Security Center that there are problems with your computer:


a27bf47.jpg

This is normal and will automatically resolve itself after the process completes. The Windows Security Center messages will go away when Kaspersky Anti-Virus will be updated and have the latest databases.
Step 3 - Configuration Wizard:
Having copied the files the Setup Wizard offers to activate Kaspersky Anti-Virus 2010. You will be offered the following options of activation:

  • Activate commercial license - a 20-digit activation code should be entered (e.g. XXXXX-XXXXX-XXXXX-XXXXX). Your computer should be connected to the Internet to activate the product. The Setup Wizard will download and install a key file automatically.
  • Activate trial license. The Setup Wizard will download and install a key file which is 30 days valid. Your computer should be connected to the Internet to activate the product. Trial version is fully-functioning, however when a trial period expires the anti-virus databases will not be updated.
info1.gifIf the option Activate trial license is missed, it means the trial version a) was already installed or b) is installed now.
  • Activate later. If you choose this option, the Kaspersky Anti-Virus activation stage will be skipped. The application will be installed on your computer, all its options will be available to you, except for the update.
In order to activate a commercial version of Kaspersky Anti-Virus 2010, perform the following actions:
  • select Activate commercial license.
  • In the field Enter the activation code enter the activation code you obtained when purchasing the license. An activation code should be entered from the keyboard in Latin ONLY without any hyphens. The program calculates the number of entered symbols and automatically adds a hyphen where necessary.
If you are not asked to activate, the wizard has detected your existing valid license.
  • The Setup Wizard will connect with the Kaspersky Lab server and will download a license key file. Please, wait while the wizard activates your Kaspersky Anti-Virus 2010.
  • After the license is activated, you will see the License type and Expiration date. Click Next.
  • The installation and activation processes are now complete. Click Finish to open Kaspersky Anti-Virus 2010.

c1b35db.gif
You may also refer to the product manual for Kaspersky Anti-Virus 2010, by clicking on the following link :-
http://docs.kaspersky-labs.com/english/kav2010_en.pdf

Sep 26, 2010 | PC Desktops

1 Answer

Product key


Call Microsoft activation and give them the number on the back of your unit. They will give you a code to activate your operating system. Try one of these #'s:
-888-652-2342

1-888-895-4335
How to activate Windows XP by phone loadTOCNode(2, 'summary'); To contact a Microsoft customer service representative to activate Windows by phone, follow these steps: 1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Activate Windows.

Or, click the Windows Activation icon in the notification area. 2. Click Yes, I want to telephone a customer service representative to active Windows now. 3. Click Read the Windows Product Activation Privacy Statement, click Back, and then click Next. 4. Follow the steps in the Activate Windows by phone dialog box, and then click Next.

Note The number appears now and differs based on the location that you select. When activation is completed and you receive the following message, click OK. You have successfully activated your copy of Windows. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 16, 2008 | HP PC Desktops

2 Answers

Windows xp activation code


How to Activate Windows XP in 5 Minutes or Less
Having rebuilt, tested, and reloaded hundreds of computers, I’ve become keenly aware of one of the unavoidable speedbumps during setup — Windows XP’s product activation. After one too many activations, Windows complains that your product key is no longer valid or you’ve exceeded the limit. To keep Windows on the up-and-up (and stay atop the seemingly endless flood of security patches), you’ll have to activate once more with Microsoft. Here are some time-tested tips that will get you through the mandatory process in five minutes or less.

Try Internet Activation First

If you have an internet connection when activating Windows, attempt to use the online route first. In the Windows Product Activation Wizard, choose “Yes, lets activate Windows over the internet now”, followed by “No, do not register with Microsoft”. You may receive a friendly “Thank you!” and your copy of Windows will be good to go.
If internet activation fails and the Wizard complains about “too many activations” or an “incorrect product key”, you still have the option of calling Microsoft’s toll free number to activate Windows. As long as the Wizard doesn’t report “invalid product key,” options are still open. An “invalid” (not “incorrect,” mind you) key is one reported or detected as pirated, so you’ll have to find some other way to make your software go.

Phone Activation

Activating Windows via phone is about as enjoyable as a trip to the dentist, but knowing exactly which buttons to push and the right words to say can help cut your time in half and get you the necessary code.
If your online activation from above failed, click the Telephone button to generate an Installation ID, which you’ll read off to a customer service representative shortly. Call the number for your appropriate country, and you’ll enter into a phone menu system which would like nothing more than for you to activate by reading the numbers onscreen. The software behind the menu, however, does the same checking as the online activation method — meaning if your online activation failed, so too will the automated phone activation. Press 0 on the phone keypad when asked if you are calling to activate Windows XP (the first opportunity you are prompted for input). Like many newer phone menus, it will respond “I see that you’d like to transfer to a customer service representative”, and subsequently try to convince you to go back to the automated system. Ignore the pre-recorded woman’s somewhat rude request to go back, and press 1 to to talk to a human.
After a short delay and the distinct possibility of listening to some poorly chosen music, a representative will ask for either the first six digits of your Installation ID, or the full set. (The first six digits of the Installation ID are the only real keys to generating a Confirmation ID, however the reps more often than not ask you to read off the rest of the group. The rest of the numbers are encoded values detailing some very basic hardware details about your computer.)
If asked “Is this the first time you’re activating Windows?”, say yes. If you say no, the representative will ask for an explanation as to why you’re re-activating Windows.
If asked “Did you purchase the software from a retail store?”, say “It came pre-installed with my computer.”
As a final time-kill (their system sometimes takes a minute to generate Confirmation IDs on days with a particularly heavy load), you may be asked for your Product Key (Windows serial number).
After you’ve given them the necessary information, the representative will read the Confirmation ID to you, which you can simply type into the provided fields. Using these methods, it takes about 4 minutes to activate Windows on average.

Oct 27, 2008 | PC Desktops

1 Answer

Windows vista activation


Yes, and you're definitely acting too thick to be trusted with a computer. For example, if you'd recorded error messages with more exactness, and attribution of errors to a particular context (say, a Windows Vista bluescreen or a particularly titled message-box;) then I might be assured that you could suffer people well to help you accomplish ambitions and fly through the checkpoints and tribulations. This is not yet the case.

Give some context as to what was working and when it stopped, what reproducible signs of malfunction and diagnostics arise, and in the case of Vista activation on spare HDs, RTFMYGDSOBOMGROFLMAO. Vista's acting normal. Try installing another OS for the practice and diversity. Most glaringly, you need to form complete sentences, with clear attribution of what says what when it says it.

May 30, 2008 | PC Desktops

1 Answer

Have just downloaded Cineolayer DVD Decoder Pack 2.3.1. - ESD but when registering won't unlock or recognise Unlock Code to enable me to use it. - Frustrated


Activating Cineplayer

Rate this article: 19_o.gif OrangefoodJSLib.events().registerNativeEvent("mousemove",document.getElementById("rating_img"),highlightRating); OrangefoodJSLib.events().registerNativeEvent("mouseout",document.getElementById("rating_img"),ratingExit); OrangefoodJSLib.events().registerNativeEvent("click",document.getElementById("rating_img"),ratingVote); Article Details ID Number: 000004CP Products: CinePlayer 2.x
CinePlayer DVD Decoder Pack for Windows XP
CinePlayer Decoder and MP3 Player Bundle for Windows XP
OS: Issue While trying to activate CinePlayer/CinePlayer Decoder Pack, you do not have unlock code or you receive an error message:

The code entered is not valid. Please check the code and reenter.
Cause
  • The unlock code is listed as Serial Number
  • The unlock code entered is not complete or invalid
Resolution
  1. The unlock code should be 18 digits long. Please make sure you use zeroes, not the letter O, in the unlock code.
  2. The unlock code is included in your order confirmation e-mail. It might be listed as Serial Number / CD Key in your order confirmation e-mail.
  3. If you did not receive your order confirmation e-mail, be sure to look in your SPAM (a.k.a.Bulk or Junk E-Mail) folders for your e-mail software or webmail client. Occasionally, the order confirmation e-mail will marked as SPAM and will be routed to the trash or SPAM folders. If you still could not find your order confirmation e-mail, please contact Digital River's Customer Service at 1-800-656-5443 or visit
CinePlayer Authentication Error on Launch Rate this article: 19_o.gif OrangefoodJSLib.events().registerNativeEvent("mousemove",document.getElementById("rating_img"),highlightRating); OrangefoodJSLib.events().registerNativeEvent("mouseout",document.getElementById("rating_img"),ratingExit); OrangefoodJSLib.events().registerNativeEvent("click",document.getElementById("rating_img"),ratingVote); Article Details ID Number: 000001CP Products: Cineplayer OS: Issue Users that are not logged in with an account that has administrative privileges may receive an authentication error upon launching CinePlayer Resolution 1. Login with an administrator account

A user account with administrator rights must login and launch CinePlayer to resolve this issue. Once the application has been launched by an administrator other users will be able to run CinePlayer without this error message appearing.
Hope this helps.

Mar 29, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...