Question about Mitsubishi WS-55513 55" Rear Projection HDTV

1 Answer

I got a Mitsubishi WS-55513 55 in and the guy said i have to replace a fuse do you know anything about a fuse and the cost

Posted by on

  • 1 more comment 
  • bubbles_com6 Sep 17, 2008

    My husband will be home after 11:00 tonight he is going to turn it on for the first time tonight we just got it gave to us i will let you know thanks i dont have your e-mail tho

  • bubbles_com6 Sep 17, 2008

    I have your e-mail and as soon as i know i will let you know thanks vickie

  • bubbles_com6 Sep 20, 2008

    Hello i turned the tv on and the green light just kept blinking and the tv didnt turn on can you help we heard replace the capacitors is this right? thanks vickie

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 203 Answers

What does the set do when you try to turn it on? What does the led light on the front of the set do?
let me know so i can help

Tim Nolan

Posted on Sep 17, 2008

  • experttv
    experttv Sep 17, 2008

    My email is experttv@comcast.net

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mitsubishi WS-65809 convergence problem


I know these sets very well and have posted instructions here for the chip replacement many times.

If you really need help I am in California and will be online noon until 11 pm tomorrow- (Pacific time) if you really want help post a question in the Premium section here attention SD TECH and I will help you more.

SD TECH

Jan 28, 2010 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

How to install STK393-110 on mitsubishi ws-65711


What would you like to know? I have full step by step instructions for this repair---You will get more direct information if you post this attention to me in the premium section here.

repair involves getting the middle board out of the set, replacing the chip, checking a few fuses and some resistors; detailed instructions also include photos of the fuses and resistors and the chip and everything needed for the repair.

SD TECH

Jan 23, 2010 | Mitsubishi WS-65711 65" Rear Projection...

2 Answers

I have a Mitsubishi WS-55511. My red convergenge is off.


I am posting a photo of the resistors here: I will post the instructions in several parts(too long to post here in one time)

Resistors:

13ae8e9.jpg

Dec 11, 2009 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Mitsubishi WS-55819 power issue


No, that'll do it. Once you've changed em you'll know right away if somethin isn't right. But take faith and fire that puppy up. If the pix is good you did good. If something is amiss. I'd be happy to walk you through it. My money is on you though.

May 27, 2009 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Mitsubishi WS-55809 installing STK392-570


un solder ics replace both of them resolder make sure you do not solder any of the circuits together or it will short something out,also ck low ohm resistors in same circuit.I will try to help you the best that i can. Main key you must know how to Solder.

Dec 10, 2008 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Mitsubishi WS-55809 2-2 code


look on the center board where the ics are and check F9A04 and F9A05 pico fuses, if they are blown you will need to replace those two 5 Amp picos and the convergence Ics

Nov 09, 2008 | Mitsubishi WS-55809 55" Rear Projection...

2 Answers

Shuts self off


Press input and menu on the tv panel and hold both buttons in together for 8 seconds and let me know if the led blinks a two digit code

May 04, 2008 | Mitsubishi WS-65315 65" Rear Projection...

3 Answers

Mitsubishi WS-55859


Check any/all fuse devices in power supply.Let me know.....T.
By the way,the tv serial # is 107543. I assume the model # is
as stated==WS-55859.

Oct 21, 2007 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

Convergence problem, then no power...


Hi! Truman001;
Check all the peco fuses on the deflection /power pcb.
Please let me know what you find.

Thanks!!

Toprol

Oct 15, 2007 | Mitsubishi WS-55809 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55513 55" Rear Projection HDTV Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...