Question about Philips 55PP9401 55" Rear Projection Television

1 Answer

Code 4 when i use intellesense

What can I do to fix it

Posted by on

  • 2 more comments 
  • gormley1086 Sep 18, 2008

    the picture is double imaged almost like a 3 d look

  • gormley1086 Sep 19, 2008

    ya I would like to fix it myself can you give step by step instructions. Its a phillips 55pp9401.

  • gormley1086 Sep 19, 2008

    thank you I will do this over the weekend. If I going to need to pick up parts?

  • jigman32 Oct 01, 2008

    Mine did the same thing, but now it is a code 3 when I run intelisense. If you can tell me ho to fix I do have a good background in tv repair, it's just been a few years since I really did it.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 203 Answers

Is there a problem with the picture?

Posted on Sep 17, 2008

  • experttv
    experttv Sep 18, 2008

    Then you have a convergence problem, and the circuit needs to be repaired. If you want to repair this yourself you will need to know how to use a meter and how to solder. Is the model number 55p9401? If you have a repairman fix this it will run you $300-$500 to repair it. Let me know what way you want to go.



    Tim Nolan

  • experttv
    experttv Sep 19, 2008

    If you take the back off and take a picture of the boards inside, then post it here I will edit your picture and show you what to do.





    Tim Nolan

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Blinking 4 times red .... can u help? sony wega.


There are a number of forums that deal with the error codes for this and other models---if you want to find the answer for yourself Google the full model number with "4 blinks" or "error codes" and if you cannot find the answer leave me a note here and I will research it and find out.

Keep in mind the blink code is just a general indication of what is wrong---it does not mean replace part XYZ and set will be working again.

May 20, 2012 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

What do I need to fix my mitsubishi TV that has a 2-4 error code (vertical protect)???


I had three tv's VS-50607,VS-50605, same problem.I called Mitsubishi and got no help.Took me two years to find because the sets were not acting up when I was there.Last set was out completly with 2-4 code. Found problem to be cold solder connection of DY (Yokes) on vertical .I bent the tip on my Weller gun and used a mirror and soldered. It was a sure repair.I went back to the first set,and soldered and it repaired it!,The second set got junked out before I could get to it.

Sep 18, 2011 | Mitsubishi VS-50607 50" Rear Projection...

2 Answers

I have a mitsubishi model wt42311 TV that will not stay on. The error code is 2 blinks a pause and 2 blinks. What needs to be fixed?


2,2 is short protection---it means one of the two soldered in fuses that protect the convergence circuit is bad.

What it really means is both of the STK-392-110 convergence chips this set uses need to be replaced---one of them got the fuse.

May be a do it yourself job if you know how to solder etc. Total parts cost should be under 30 dollars.


Let me know if I can assist you further.

SD TECH

Jan 23, 2010 | Mitsubishi WT-42311 42" Rear Projection...

1 Answer

I replace the bulb and I'm getting a blinking error code 3 4. How do I fix? Mitsubishi WD-52525


That code can often be caused by failed capacitors on the power board which will cause the 34 error for lamp abnormality. The V26 Power repair kit at www.tvrepairworld.com may fix that issue. The kit contains the replacement capacitors and has the CD with instructions.

Dec 14, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Sony lcd projection tv in self diagnosis mode. 4 red flashes


This is a fan error take the back off the set and see if the fan is turning.

Sep 13, 2009 | Televison & Video

1 Answer

I have a Hitachi 57F500 HDTV SRS TV and can not get any chanels


unplg tv 4 30 min plug bak in if does not reset u will have remove supply voltage to computer clock 2 do this u must go into back of tv and look on board until u find a whats looks like a watch battery remove it wait 6 minutes reinsert it this just reset the clok in the microprcesser dumped the ram this should fix ur problem everthimg should go back 2 factory seettings read manual

Jul 25, 2009 | Hitachi 51F500 51" Rear Projection...

1 Answer

Sony wega and i get 4 blinking red lights


4 blinks code shows problem in Vertical Deflection section of TV. Of course it worth to be repaired. If you are not familiar with TV repair then call TV tech to fix it. And if you are tech person, let me know to help you out with tech info.

Jan 09, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Mitsubishi 50607


22 is the code for short protection. Which means the set has shot down due to one of the components being shorted. My quess would be at least a 3 to 4 hundred dollar repair maybe more depending on the shops integrity.

May 09, 2008 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

Can't find a code to operate the universal 4 in 1 remote


Most remotes of that type have a "Code Search" feature, and it's the easiest way to find the code. You would put the remote in search mode (following the remote's instructions) and run through the codes 1 at a time, if you see the Unit turn off, you store the code. If that doesn't work, then the remote simply won't work for that Unit.
Hope that fixed ya...
Geno

Apr 21, 2008 | Televison & Video

1 Answer

Mitsibishi vs60707


This a deflection problem. Both 2-3 and 2-4 are deflection. Most likely a verticale problem. a tech will need to fix it.

Mar 15, 2008 | Mitsubishi VS-60707 60" Rear Projection...

Not finding what you are looking for?
Philips 55PP9401 55" Rear Projection Television Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...