Question about Televison & Video

1 Answer

Magnavox 13" Color TV, Model CD130MW8, Manufactured April 2007 Does not detect channels (says "No Signal"). DVD in Video mode works fine. Composite audio/video to front through Video mode works fine. TV does not respond to remote. Radio nearby detects remote buttons pressed. Infrared detector circuit seems to be problem. Anyone else seen this? Any way to talk to TV without remote?

Posted by on

  • jcieszlak Sep 19, 2008

    Solved problem.

    Found out remote was a universal remote. Found code for it and got remote to work. Then could get into menu and set for right channels (CATV or analog TV).

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,251 Answers

Check and replace the tuner.
If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

Posted on Aug 02, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Sanyo TV stuck on video channel

sanyo ds35590 no remote, tried universial remote still cannot select menu on uvm. What remote do I need? Or can I get into the menu without remote. I am trying to watch a dvd.

Posted on May 25, 2008

  • 1 Answer

SOURCE: My TV has stopped responding to the remote control (and the universal remote) and the front panel buttons don't work

waynejman, I have the same exact problem, can you tell me what your outcome was?

Posted on Nov 16, 2008

SOURCE: Magnavox PJTV model 51mp392/17 -pressing channel buttons changes

You need a professional.
Your TV has "lost is mind"

Stop using the TV until it is repaired.
Continue to use it and your problems will multiply and grow more expensive.
Call the manufacturer to find you nearest authorized service center.

MR. TV Sales & Service Inc
Milwaukee Wisconsin 53405
(414) 762-8600
Established 1974

Posted on Mar 24, 2009

vortash
  • 431 Answers

SOURCE: trying to hook up dvd player to ET413E TV

Hi I am Vortash most Tv sets have a channel change button on the front of the set sometimes behind a drop down panel it will have the symbol AV written on it .. when pressed the set will say either Av1 AV2 etc or Aux 1 aux 2 .. if you have scart sockets on the back usually Av 1 is this socket and Av2 the front sockets Phono or Bnc plugs .. sometimes the Av is switched by pressing the program button to Zero or Av from the front set controls + and - Prog .. If you are unsure you can download a manual for your set if you don't have one from http://www.safemanuals.com
free of charge usually and it will explain all the conections you need ... Regards Vortash

Posted on Jun 08, 2009

  • 1 Answer

SOURCE: RCA HD52LP: Composite video inputs don't work

RCA Authorized service tech looked at it. He determined that the DM Module need to be replaced. The part alone costs $550 + labor. Since the HDMI and component video inputs seem to work, he suggested buying a VCR DVD combo with HDMI output which would be far less than repairing the tv itself. I'n researching the possibility of purchasing the part myself.

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Direct tv remote contro code for magnavox cd130mw8


Visit this site for more details. Type in the site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help

May 22, 2012 | Magnavox Televison & Video

2 Answers

Looking for user manual for philips magnavox tv. 9P6044 C104, 3911Q1716. Trying to find out how to hook up my VCR to this tv. It has s viedo, video, L audio & R audio holes on front side of tv. I want...


Barb..be sure you run a TV signal through the VCR first. And then a coaxial from the VCR to the TV. This is the easiest solution for now. And set the vcr to tv/video {channel your movie is on}hit record and hit tv/video and watch your tv for another movie!

Feb 06, 2010 | Philips 9P6044C 60" Rear Projection...

1 Answer

Need 5 digit codes to magnavox tv with funai remote


try 20000, 20593, 21593, 20035, 20039, 20081, 20149, 21781

Oct 20, 2009 | Televison & Video

1 Answer

Can't receive pic and sound with converter box.


Connect the RF output of the Magnavox to the VHF/UHF (ANT) input at the back of the TV. Select channel 3 or 4 on the TV. An alternate is to connect the component output (red-white-yellow) to the Audio/Video In jacks at the front of the TV (the red or the white would be left unconnected) and use the TV/Video button on the remote to select that input.

Jul 08, 2009 | Toshiba 13A24 13" TV

1 Answer

Need the remote code for a phillips dvd player


These are the codes printed in the owners manual for your dvd/vcr player.If they do not work you will have to contact Emerson and ask them for help getting the code. The contact number should have come with the instructions for the remote. Just give them the model number of you remote and the units model number and they should be able to help you. I hope this information helps you with your problem. Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Press a button on the TV’s original remote control that selects an external input channel until the DVD
recorder’s picture appears. Check your TV owner’s manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO 1, VIDEO 2, VIDEO 3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands (Example)
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00

Apr 25, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

3 Answers

Magnavox DV220mw9 won't record from Tv, hard to connect


check out this diagram, paying close attention to the audio video cable hookups.

assume the cable tv box represents the converter box

you are going to come out of the converter box audio and video outputs into the new magnavox dvd/vcr combo audio and video inputs.

Then out of the new magnavox dvd/vcr combo outputs to the inputs on the tv if it has such inputs. The TV will have to operate on the video input 1 or 2 if the tv has such a thing, use the remote for the tv to adjust the input signal to line in 1 or 2 depending on what it has.

If the tv has no coaxial input or audio video inputs then you might have to use an adapter, you can get these from radio shack.

You say it will not record from the tv, but in all actuality the dvd vcr combo is getting the signal from the converter box not the tv, do you understand what I mean here?

So the dvd vcr combo gets input from the converter box so you will have to set it to view signal from the line input you have plugged in from the converter box. line 1 or 2 or whatever the input is.

the tv will have to be set on the line input to view the signal from the dvd vcr combo.

That is as easy as I can put it. Study the diagram closely. You will see what I mean.

Mar 07, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Old Sylvania model #6420FB lost remote how to switch to av mode


Unless the TV has a front-panel menu button and allows you to switch modes from there, you are out of luck. There are two possibilities. One is to try another replacement remote. If you get a universal remote made by the TV manufacturer (Magnavox), it may have buttons that will work. The other option is to purchase an RF converter, which will cost around $15. This will take the video/audio signals from the game and convert it to a channel 3 or 4 signal you can then tune in on the TV. The picture won't be quite as bright and clear as with direct AV input, but it will do the trick.

Jan 11, 2009 | Durabrand BH1304D 13" TV

1 Answer

Magnavox dvd recorder & 4 head hi fi stereo vhs with digital tuner


How are you connect to the tv. Make sure on the back you have your color cables on the VIDEO OUT section and are going to the back of your tv. Now that just will work as a dvd now if you want to record you have to get that screwy antenna cable thats on your tv. YOu want to unscrew that one off your tv and put it in the dvd recorder under ANT IN the cable that was provided with you goes to ANT OUT back to your tv !!! if that cable is too short just "find another that's longer and will suit your situation. Keep in mind if you dont have the color connections it wont work and you will have to buy another unit its called a RF modulator and which converts the signal for you and works the same. Rf modulator runs at 5-20$. THATS ONLY IF YOU DONT HAVE THE COLOR CONNECTIONS ON YOUR TV. IF YOU DO HAVE THOSE CONNECTIONS, you need to get your original tv remote and look for a button on the remote that says input, tv/video (the name of the button varieties from tv companies but it has something to do with video) the reason why we are looking for this is because your dvd recorder needs to be put on this special channel to operate from there you will be able to change the channels

Oct 31, 2008 | Philips Magnavox MWR10D6 DVD Recorder

1 Answer

DVD input with signal access


IF I understand you correctly, the VCR, Satellite, etc is connected using an RF modulator/coaxial cable wire going into Antenna in

IF this is true, then you have an AV IN port (red, yellow, white) free on the back. Just connect the red, yellow, white from the out of the DVD - you can use 1 or 2 - just remember which one you used; and connect it to the AV IN on the back of the TV.

THEN press ch down on the TV remote until you get to "AV1" - it is below channel 2; double check DVD player to make DVD is playing and voila!

Jun 22, 2008 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...