Question about Kenmore 21513 Vacuum

1 Answer

Kenmore 21875 One day it's working fine. Next day, it won't turn on. When I attach the hose to another vacuum cleaner, it runs. Is there a reset button on the canister? Could it be the receptacle is bad?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

My first recomendation would be to try pluging into a diffrent wall outlet as well as something that is on a diffrent circut . It is a known problem that the pins inside that make the connection could be worn out . There are several pins from the one on the hose to the handle ect , check all componants to see that where the connection is lost you will find that you will need to replace that componant

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the CVA located in the Electrolux Epic 6500SR?


You need to replace the control valve. It's inside the canister under the dirt cup. If you want it done by a professional, call your local authorized Aeurus dealer.

Jun 28, 2015 | Electrolux Vacuums

1 Answer

When I replaced the bag, the bag replace light comes on unless I don't use any attachments. what is the problem?


Could be a blockage, push a broom handle through the pipe that will clear it.

Oct 18, 2014 | Kenmore Vacuums

1 Answer

My Miele S3141 canister began acting strange this morning. No suction...so I took off the hose and checked for blockage, (nothing). Now I can't get the hose back on the canister. It just slips ar


see this causes and fix it. God bless you
Air filter:
If the vacuum cleaner won't pick up dirt and has no suction the air filter might be clogged. Remove the filter and either clean or replace it as needed.
Exhaust Filter If the vacuum cleaner won't pick up and has no suction the exhaust filter might be clogged. Remove and clean the filter, replace it if its torn or damaged.


Vacuum Hose If the vacuum cleaner won't pick up and has no suction the vacuum hose might be clogged. Remove the hose from the vacuum cleaner, stretch it out straight, shine a bright flashlight in one end and try to see light through it. If no light can be seen, use something to run through the hose and free up the obstruction.
Vacuum Bag If the vacuum cleaner won't pick up and has no suction the vacuum bag might be full. Clean or replace the bag as recommended by the manufacturer.

Dust Cup AssemblyIf the vacuum cleaner won't pick up and has no suction the dust cup assembly might not be installed tightly, or it might be cracked or broken. The dust cup must seal tightly in order to produce the right amount of suction. If it is cracked or broken, replace it. Most glues and adhesives will not successfully seal the crack.
Blower Wheel If the vacuum cleaner won't pick up and there is no suction, the blower wheel might be jammed or broken. Check the blower wheel to be certain it turns freely. If it doesn't, check to see if there is anything rubbing against it. If not, but it's hard to turn, the motor is most likely the problem.
9_28_2012_11_32_31_am.jpeg9_28_2012_11_32_53_am.jpg

Sep 27, 2012 | Vacuums

1 Answer

Vacuum shrinks, power is still on but no suction


perhaps there is something stuck in the vacuum. Look where the hose fits in. There is obvioulsy no blockage in the hose because you have suction. Do the power brushes spin on the vacuum?? Take the bag off, and inspect the area the bag fits in for blockage.
Jer

Jan 16, 2010 | Kenmore Magic Blue 24195 Bagged Canister...

2 Answers

We have a Kenmore canister vacuum cleaner. the carpet cleaning attachment, I think is called the power mate has a beater that is intermittently working now


Your hose could be bad. The wires frequently go bad up by the handle switch. also could possibly be the wand, those go bad. You can check that by attaching your powermate directly to the nozzle without the wand and see if the same problem is there. Do you have the mini powermate also? the one that is usually mounted on the wand. If so plug that in directly to the hose and see if you have the same problem. If that tool works fine then the problem is in the powerhead.

Jan 03, 2010 | Kenmore 23812 Progressive PowerMate Bagged...

1 Answer

Durt Devil upright 12 amp Vision Vacuum Cleaner


If there no blockages in the hoses, then the next thing to check would be any filters in the vacuum. When these get clogged, you will experience this problem.

Dave

May 13, 2009 | Vacuums

2 Answers

Vacuum will not turn on


Kenmore Model 116, behind the Vacuum cleaner there is a Motor Reset switch which you need to press.
1. Make sure the Vacuum Cleaner is unplugged.
2. Press the reset button gently in with a pen.
3. Plug back the Vacuum cleaner and it should work.


Jan 31, 2009 | Vacuums

2 Answers

Kenmore progressive/direct drive-- roller stopped turning


We have the same vacuum & had the same problem. As the vacuum ages & the hose is periodically removed from the nozzle to use with the attachments, the white switch, adjacent to the nozzle connection, wears. If the hose is not fully reinserted or if the attachment notches are inadvertently aligned with the white stitch, the agitator may not work reliably. Assuring the hose is fully inserted, with the locking notches away from the switch has eliminated this problem with our vacuum cleaner.

Jan 24, 2009 | Kenmore 31913 Progressive Direct Drive...

1 Answer

Kenmore 21875


Give the prongs a wiggle and see if there is any play in them.Might just be a plug end.

Oct 18, 2008 | Kenmore 25512/ 25513 Progressive Canister...

1 Answer

Kenmore Progressive Model # 116 25914507


I had the same problem with my vacuum. I called in for technical service and was told to push the "reset button". It turns out that there is a small red button right next to the dirt indicator light. I pushed the button, plugged the vacuum back in and started it up and it worked like a charm! :) Hope this helps!

Mar 25, 2008 | Kenmore 23913 Progressive PowerMate Bagged...

Not finding what you are looking for?
Kenmore 21513 Vacuum Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Roger Potts

Level 3 Expert

694 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Kenmore Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...