Question about DVD & Blu-Ray Players

Open Question

Avious dvd player, with surround sound and radio. Firstly doesn't pick up anything from remote control. Secondly had sound but no picture. Have just pressed 'band' button and now have picture but can't tune it in properly.

Posted by on

  • gillpipes Dec 26, 2008

    I have exactly same problem. Seems like top half of remote buttons work but lower half get no response. Also have sound but no picture.

×

6 Suggested Answers

  • 1 Answer

SOURCE: LG DV8621P

Have a look at my post for this player regarding 'progressive scan'

Hope that helps

Posted on Feb 20, 2008

  • 1 Answer

SOURCE: Panasonic DMR- EA18 DVD player/recorder - Remote control Problem

I figured out, unlike all the other posts, you don't have an enter button. But Instead, you would hit the 2 and OK button at the same time for a few seconds. I had the RC1 message and I did the 1 with OK and it worked. so if you have RC2, you should hit the 2 and OK. Should work!!

Posted on Jan 31, 2009

SOURCE: JVC TH 53 Dvd surround sound system. System locked

Dear friend,
Press and hold stop+play button on the front panel of the dvd player more than 15 sec the player will be resetting

Posted on Mar 29, 2009

stonephoenix
  • 563 Answers

SOURCE: Remote control not functioning properly

I work for Coby technical support. Our customer service phone number is 1-800-727-3592.

It sounds like the remote needs to be replaced. Below is the procedure you would follow to obtain a replacement remote from COBY.

To obtain a replacement part from COBY, you must follow these instructions:
Please send:

1. A money order made out to COBY Electronics in the amount of $6.00 (FOR EACH PART ORDERED! -- TFDVD batteries cost $18.00)
2. A note with your full name, phone number, and return address.
3. A note detailing the model number of the device/unit and the part being requested.
4. If you're requesting a replacement remote please write the numbers found on the back of the remote on the note mentioned above.

We strongly suggest you either send the above requirements via certified mail OR with delivery confirmation which is available from the post office. And please hold on to your money order receipt/stub.

COBY will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged. Please mail the above requirements to:

Customer Service
COBY Electronics Corp.
56-65 Rust Street
Maspeth, NY 11378

Failure to enclose the above requirements will result in a delay in the processing of your part request. Please allow 4 weeks for the processing of your request; allow 6 weeks during the November to February holiday season.

While this solution doesn't "fix" your problem, I hope that by giving you the facts, I've enabled you to make an informed decision as to what to do next.

Please let me know if I can assist you further.

Posted on Apr 17, 2009

SOURCE: i need remote control codes for a Sylvania VCR/DVD

hi! i have here a couple of codes for your sylvania DVD/VCR just try them, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1145, 3095. hope this helps!!!! goodluck!!!

Posted on Jun 09, 2010

  • 1 Answer

SOURCE: I have a Phillips DFR-1600 DVD/Surround Sound

where can I find a remote for my DFR-1600 DVD/surround sound

Posted on Dec 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to connect PS3 to surround sound


Firstly if you have a HDMI Supported TV, change the video output settigns to HDMI on the PS3

Then change audio output to scart.

Then remove the scart block from the Scart that came with the PS3 and connect the red and white into the co-insiding ports on the back of your surround sound DVD player.

Set DVD player to AUX and away you go!!!!!

Hope this helps

on Apr 10, 2010 | DVD & Blu-Ray Players

1 Answer

Need to know what formats are supported by the Durabrand 1002 DVD Player.


Hi,

The complete Detail would be :-

Product MPN MPN DVD-1002
Key Features DVD Type DVD Player Number of Discs 1 Progressive Scan With Progressive Scan Playable Disk Types CD (Audio), CD-R, CD-RW, DVD Video, Picture CD Playable File Formats JPEG, MP3
Audio Surround Sound Dolby Digital (Digital out only)
Connections Outputs Composite x 1, S-Video x 1, Analog Audio x 1, Digital Audio Coaxial x 1
Convenience Remote Control Standard OSD Yes
Other Features Exterior Color Gray
Miscellaneous UPC 017999010026

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Sep 26, 2009 | Durabrand DVD-1002 DVD Player

1 Answer

How to change language setting on dvd without remoto control


There is a good chance your stuck. you may be able to use a cable satelite or even a surround sound recievers remote. most are learning remotes activated by a 3 or 4 digit code.look at your manuals for these codes and programming steps.you can also purchase this kind of remote from various retailers. however the codes are not on the outside of the packaging so make sure it will control your specific dvd player before you buy it.

Jul 07, 2009 | DVD & Blu-Ray Players

1 Answer

Does remote have audio volume adjust?


I work for Coby technical support. Our customer service phone number is 1-800-727-3592.

Unfortunately, the dvd 224 doesn't have a volume adjustment. The models that do are the ones that come with 5.1 surround sound speakers such as dvd 755, dvd 937, and dvd 958 just to name a few.

If you feel this solution doesn't deserve a good rating, please let me know why so that I may better assist you. If there is anything more I can do to help, I will!

Dec 20, 2008 | Coby DVD-224 DVD Player

1 Answer

Remote Code


THE SURROUND SOUND REMOTE THAT CAME WITH MINE IS AD-100MTRS . for the surround sound system for the ad-1100s dvd palyer.. my surround sound no longer works. i do havethis remote still.. where are you located.
e-mail me back at:
MONSTERMUSIC@AOL.COM
use suject-remote for surround sound system.

Feb 08, 2008 | Aspire Digital AD-1100S DVD Player

1 Answer

Wharfedale DVDRHD400


where can i get a remote for the wharfdale dvdr hd400

Jan 15, 2008 | Wharfedale DVD-M3 DVD Player

1 Answer

Remote Sensor


Start a DVD playing, cover the IR sensor on the DVD player with something opaque. Try changing the volume, the player should keep playing. Your TV, surround sound, and DVD player have conflicting IR codes. The DVD player probably does not use a discreet IC to filter the IR sensor, and the processor in the DVD player is having to look at all the IR codes picked up by the IR sensor. Go to Walmart or KMart and buy a new DVD player for $29.00 or stop changing the volume while watching DVDs :) Sorry, there's no real solution that I know of. Paul.

Jan 01, 2007 | Norcent Technologies DP313 DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96627 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...