Hi My CX6600 just wont turn on and yes I have change fuse

if there is blown fuse, that means there is short circuit ahead. u have to check the rectifiers, the main filter capacitor, main switching device & associated parts with the help of a resistence meter.
only after replacing the bad part u should replace the fuse with same rating.

yes you can download the software that was on the cd from
http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-CX6600/Drivers-Support

Hi Andy,

This helps remove the nag screen:

1. Go to Printers and Faxes (or the equivalent screen that lists all your printers)
2. Right click your CX6600 printer and choose "Printing Preferences"
3. Click on the "Maintenance" tab
4. Click on the "Speed & Progress" button
5. Tick the "Disable EPSON Status Monitor" checkbox
6. Click on OK
7. Click on OK to close the Preferences window

That should sort you out and allow you to print in relative peace...

Cheers,

Martin

Hi

Yes there is a scanner driver available, this however is a Twain driver and you will need to use the "Import" or "Aquire" function from within word, office scanning utility, Adobe Standard etc for this to work.

Check out this link and use the "TWAIN" driver.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=41664&prodoid=46253282&infoType=Downloads&platform=Windows

most printers have a slo blow fuse to protect the power supply, you would have to take off the cover that the cords runs into and check the board for fuse continuity with an ohm meter if all fuses are good check the two wires from the power cord to the same board for 120 volts. if you have voltage at the board, more than likely you have a bad board.

Press the Setup button and the A button at the same time until "7. Language" appears on the LCD screen. Press the D button until "English" appears and then press OK button.

I had the same problem that was similar where it would get to 16% of the document and then say that the printer is not responding. I unplugged the USB and plugged it back in and that fixed it, but it did the same thing about a month ago.

hi-
are you using an intel based mac or power pc mac?

download the driver from this link

EPSON

and inform me if you have issues still

1 of 2 things.
Either you have an inline fuse on the power supply that has failed.
If there is not a fuse, then the power supply itself has failed.

you should be able to navigate on the little screen directly on the printer. try pressing the left or right arrow keys until you see change cartridge.