Question about Digital Cameras

1 Answer

Camera won't turn on, new batteries install still won't turn on

Posted by on

  • 3 more comments 
  • walin Sep 17, 2008

    my dc-5502b camera wont turn on

  • jbleakley02 Nov 18, 2008

    the camera will not turn on and I put new batteries in it and still wont turn on.

  • tdobson7 Feb 02, 2009

    the camera just won't turn on,i've took the memory card out,i've installed new batteries alcaline and still won't work..

  • Anonymous Mar 31, 2009

    Camera won't turn on at all. Tried all new batteries many times.

  • Anonymous Apr 15, 2009

    i charged the battery and my camera still wont turn on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same issue. I know my test batteries are good. Took a look inside and do not see any corrosion. But there is a battery sodered on the main PCB that may function like the PC clock batteries, if those are completed dead/shorted then the PC will not boot until its replaced, but this one is not intened to be swapped, so they plan on it being a throw away product after a year or so. Mine died after 2+ years, but couldn't bring myself to toss it out with out a look, it's been siting for a year now and I finally cracked it open. Now where can I find this teeny battery Panasonic x814, the x is obcured by the solder strap, so one of 9 possibles.

Posted on Dec 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't turn on


possible battery problem. look at battery contacts. clean w/ pencil ereraser or small scraping devise.GENTLY, on battery and camera.
possible dead battery even if new.even if you buy a new battery, clean ththe contacts an battery and camera.

Sep 25, 2012 | Kodak EasyShare DX6490 Digital Camera

1 Answer

Canon PowerShot A3100 IS won't turn on


Make sure the battery is installed correctly.Try opening, then closing the cover to the memory card and battery compartment while holding pressure against it until you hear it click closed. Then try to power it up. The camera will not power up if the cover is not properly closed.

Aug 22, 2012 | Canon PowerShot A3100 IS Digital Camera

1 Answer

Polaroid A500 digital camera pressed ON button, nothing happened with new AA batteries and SD card


Things to check first for a camera that won't turn on are battery contact points, and micro switches that are located on the battery and memory card doors. Troubleshooting tips on other things that need to be checked may be seen here. These tips won't work for every case, but they're worth a try.

Nov 25, 2011 | Polaroid Digital Cameras

1 Answer

The camera is new and won't turn on


If the battery has been properly charged and the camera will not turn on, I would bring it back to the dealer for warranty service. The camera should simply turn on if a good battery is installed.

Jerry G.

Nov 19, 2011 | Digital Cameras

2 Answers

The camera ran out of battery and I put in 4 new alkaline batteries. Now the camera won't turn on at all.


Unless the batteries are in wrong they must be dead. try to use new ones and check for the instalation some of these cameras use wierd configurations on which is positive and what is negative.

May 25, 2011 | Nikon Coolpix L110 Digital Camera

1 Answer

I took a picture with my Camera shut it off went to go use it again and it won't turn on. I've charged the battery and it still won't work. Any ideas what's going on. Thanks Jamie


Its not a problem with the battery, the G7 and the G9 have a problem where a loose screw inside the camera shorts it out and causes it to not power. The repair service is about $85 total for a new part, installation and return shipping of the camera!


Thomas Drayton
Owner www DarnToothySam com
Affordable Digital Camera Repair

May 14, 2011 | Canon PowerShot G7 Digital Camera

1 Answer

Screen blinks for one second when switched to camera mode and than is black. Len's comes out but camera won't work. Card is installed and batteries are new.


screen blinks for one second when switched to camera mode and than is black. Len\'s comes out but camera won\'t work. Card is installed and batteries are new

Feb 20, 2011 | Fuji FinePix F420 Digital Camera

1 Answer

I have Kodak EasyShere V1223 It won,t Turn on, Go


Here are the steps for V1223 no power problems: 1. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Turn the camera on. 2. Without the memory card, turn your camera on. (If it works then it?s your memory card that is faulty) 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a no power repair with KODAK or a new cable. In order to organise your repair or Trade up please Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Jan 17, 2010 | Kodak EasyShare One Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Cameras Experts

kakima

Level 3 Expert

96627 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...