Question about Whirlpool Kitchen Ranges

1 Answer

I HAVE A WHIRLPOOL GAS OVEN AND GRILL AKG667 MODEL NUMBER 853566715000 WHEN THE GRILL OR OVEN ARE SWITCHED ON THE FUSE CONTINUALLY BLEW. I CHECKED THAT THE CONNECTIONS WERE OK. NOW WHEN THE OVEN IS SWITCHED ON THE FUSE DOES NOT BLOW THE IGNITER SPARKS BUT THERE IS NO GAS FLOW. WHEN THE GRILL IS SWITCHED AGAIN THE FUSE DOES NOT BLOW BUT THERE IS NO IGNITION OR GAS FLOW.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

Hi thanks for the question so the igniter works but no gas most of the gas stoves have the same problem if the igniter works but no gas could still be the igniter the igniter must get almost white hot to ignite the gas if id does not the gas wont lite so the ather problem is igniter lights but no gas problem is with the 2 coils on the gas valve replace those thanks the appliance doc

Posted on Sep 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Oven 6AKG569IX does not operate. Lights do not come on to controls when switched on


It is possible that, believe it or not, that if this is a single oven under worktop type that it is actually connected with a 13 amp plug and the fuse in this may have blown. You will have to pull it out to check. It is very unlikely there is a internal fuse in the oven itself.

Oct 20, 2014 | Whirlpool Ovens

1 Answer

I have a Whirlpool double oven GMC305PRS01 when you turn on the oven it appears to me making all the right move IE it goes into pre heat and starts counting down but the elements are not getting hot.


Member Discussion on Whirlpool GMC305PRS01 Microwave Oven

Whirlpool Wall oven/microwave combo unit Door message
Does anyone know where the 15 amp fuse is? I replaced the 20amp fuse and it worked for a minute or two and then I opened the door and I blew my circuit breaker. I reset my circuit breaker, replaced the 20 amp fuse and now all I get is the Door message. I also noticed that it fused the outside switch on the right side of the door so I had to open the switch up and un-fuse it. This is for a whirlpool GMC305PRS01 Wall Oven/microwave combo unit.

Also if anyone could tell me the correct position the wire is supposed to be hooked up on the switches? I had someone help me take the switch out and they unhooked the wires and now we aren't sure how they are supposed to be hooked up. My light on the microwave doesn't work either. Is it possible the bulb blew when the fuse blew?

Nov 22, 2010 | Whirlpool GMC305PRS Stainless Steel...

2 Answers

My oven fan is making noise what should i do?


check to see why it is making noise. look at the fan while it is spinning DO NOT INSERT YOUR HANDS and see if you can see what the fan is hitting and why it would be hitting whatever it is hitting could be the shaft onthe motor is maybe bent or a blade is bent on the fan blade itself or maybe something fell into the fan and that might be makin the noise hope this helps

Jul 17, 2010 | Ovens

1 Answer

Oven wont heat


There is a temperature activated thermostat (TOD) that is located on the back of the oven that would explain the problem you are having. The part can be checked with an ohmmeter and should read 0 resistance if it is good. The part number is 9759243 if your model number in the description is accurate (RBS245PDS)

May 04, 2010 | Whirlpool RBS245PDS Electric Single Oven

1 Answer

Stoves 720EF Top Oven Failed


there is a safety stat/fuse on top of the oven exterior i think you will find that it also has blown. Make sure you have isolated the appliance at the fuse board first though, Good Luck

Dec 22, 2008 | Stoves 720EF Electric Double Oven

1 Answer

Electrical fault


Might have issues with ignitor, or solenoid for gas

Oct 28, 2007 | Belling DB2 Dual Fuel (Electric and Gas)...

2 Answers

The cooker stays warm when mains cooker switch is on.


Either teh grill element or the oven heating element is fault or the thermostat or grill regulator, locate which element is warm, if the grill then it is most likely the regulator, if it is the oven it is the thermostat. Engineer

Jul 20, 2007 | Stoves 800DFDOm Dual Fuel (Electric and...

1 Answer

Faulty oven


you need to either set the time, or just press the centre button to activate the cooker.

Sep 19, 2006 | Whirlpool AKZ159IX Oven

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

4804 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...