Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

I have problems with my kenmore elite quiet pak2

My kenmore elite quiet pak2 machine has not worked for about 2 months now and i keep getting a "DLF" code. my manual says nothing about this code and yes i have tried the suggested 3 second hold on the spin button. i'm wondering if there is a technician's manual that can be purchased? (like when you buy your car's manual)......can someone please help or make a suggestion? naturally the warranty has expired. thanks!

Posted by on

  • doracrespo Sep 17, 2008

    wow, i am impressed with how quickly someone responded! i have printed your suggestions and will show it to my repair guy (aka my handy brother). he should hopefully get to it by this weekend. i will post more info after he takes a look. thank you again fixya.com and especially to docjohn174! your service is awesome!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

Hi thanks for the question the dlf code for the duet says drain pump remove bottom panel the pump is on the right but there is a big nut in the front remove the nut use bucket as water will come out and clean filter thanks please accept and a positive feed back is nice thabks the appliance doc

Posted on Sep 17, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore elite quiet pak2 washer-in the time remaining/de l at display a y, digital numbers are flashing and sometimes read08,8:88,0:88 and when I choose a setting and press start the machine locks the


Sounds like the control panel is defective or you have a stuck key on the unit. Check the control panel for any obvious cracks, damaged, etc. if all else fails, you'll have to replace the control panel.

Jan 09, 2015 | Kenmore Washing Machines

1 Answer

My Kenmore elite quiet pak2 fills with water on it's own


Most likely inlet valve is defective and need to be replaced

Dec 09, 2013 | Washing Machines

1 Answer

I have a kenmore elite total care flex king size capacity plus quiet pak2 oasis that makes loud noises like a airplane when its in the spin cycle Model #110.28032701 which parts should be change?


If the washer is roaring during spin, the bearings are bad and you will need to replace the outer tub assembly.
Here is the part to order.

The part comes with a 365 day, any part, any reason return.

Nov 03, 2012 | Kenmore Washing Machines

2 Answers

Unresponsive control panel on Kenmore washer 110.280 327 01


check and make sure its not set on delay mode first,if so press delay button till it cancels delay time on readout

May 11, 2012 | Kenmore Washing Machines

2 Answers

My HE3 kenmore elite quiet pak2 will not empty out water and spin


This due to the drain pump either being clogged or having a broken pump rotor. You can access the pump to check this by removing the bottom front panel by removing the 3 screws under the panel. You will need some towels bacause you will have A LOT of water come rushing out when you unscrew the drain pump cleanout. If this cleanout is clogged, remove the obstruction and test the washer, if there is no clogg you will need a new drain pump, this part can be ordered at, http://www.reliableparts.com/ by using your model number to lacate the pump. It is very easy to replace, just be sure to disconnect the power to the washer first =)

Please rate mt solution if it was helpful to you.

Thanks, Repairman45

Dec 15, 2010 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Control Locked light on


Hi


Thanks for using FixYa. To unlock the controls you’ll need to press and hold the DRAIN/SPIN button for 10-15 seconds. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 11, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite Frontload Washer not working


If you already changed the door lock the only other thing that controls that is the control board... It might be faulty.

Nov 04, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Washer won't spin- flashing "f 02"


in the HE3 series it means the drain tube or pump is clogged

Mar 02, 2009 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...