Question about Casio Parts Cash Register PC Desktop

1 Answer

Z number would like to turn off the Z number counter on my cash register . this is a number that is printed on to the end of day report .every time i do an end of day report the number is increased by one and printed . I have looked in the tk 1300 manual but can't find anything . Is it possible to remove or discounect the component(if its stored that way)on the pcb board ??

Posted by on

  • icarap Oct 02, 2008

    Is it possible to disable the z number from being printed then ??

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

Hi.
The Z counter cannot be turned off, as it is a security issue. the staff could use the feature to reset the reports without the managers knowledge, so Casio do not let you do it. The counter is held in the totaliser file which is in system memory. You would need to initialise the machine and program everything from scratch (around 6 hours of work for a full memory).

Mark

Posted on Sep 17, 2008

  • flexion1
    flexion1 Oct 02, 2008

    No. You can't stop it from being printed. They thought of that too.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi how do I printed my cash up after the day sales


Each model has a special code to print different reports at end of day. If you have lost the manual, one of the forum guys has most of them here:
https://the-checkout-tech.com/cashregisters.php

May 22, 2016 | Retail Supplies

2 Answers

How do I do a Z report


There are special codes on most machines depending upon the type of report you need. Use the codes in the manual to create a report. If you don't have a manual, one of the users has most here:
https://the-checkout-tech.com/

Oct 08, 2015 | Retail Supplies

1 Answer

How can i get my te m80 till to print it was printing but now nothing on the paper my grandchild was plying with buttons


If it still prints an end of day report, the receipt is probably turned off (press PAPER SAVING button).
If the end of day report comes out blank, make sure you have the shiny side of the paper to the front (only prints on one side). If those things are not the problem, it is probably time for a new printer. The Seiko printers in that model were total rubbish and frequently need replacing if you print a lot.

May 13, 2015 | Retail Supplies

1 Answer

Journal tape


What this means is your machine has the Journal-off function activated

Jan 27, 2014 | Casio TE-2400 Cash Register

2 Answers

Z report


Turn the mode switch to the Z/PGM position. Press 0001, then CA/AT/NS.

Oct 18, 2012 | Sharp XE-A106 Cash Register

1 Answer

How do you Z out a 435dx


"Z" (Prints End-of-Day Management Reports and Resets Totals) - Prints the "Z" management report at the end-of-the-day and resets totals to zero (except "locked-in" grand total).
To print Management Reports, slide the control switch to the "X" or "Z" position as needed, then press the [amt tend/TOTAL] key. Refer to explanation starting on page 37.
"X" AND "Z" SALES MANAGEMENT REPORTS
__________________________________________________________________
Transaction data is maintained in the memory of the cash register as long as the battery back-up system is in effect. This data can be printed as a report for management review.
The Management Report can be printed from either the "X" or the "Z" position on the Control Switch.
"X" POSITION REPORT (Refers to a mid-day reading)
The "X" position report prints the accumulated information and RETAINS ALL TOTALS IN MEMORY. Use this position to print periodic readings of transaction information at any time through-out the day. (Some users call the X-report a mid-day report).
"Z" POSITION REPORT (Refers to an end-of-day or close-out reading)
The "Z" position report prints the same information as the "X" report. However, once this report is printed, ALL TRANSACTION TOTALS ARE RESET TO ZERO except the Grand Total. (Some users call the Z-report an end-of-day report).
NOTE: To prevent accidental printing of the "Z" report, set the security code as explained in the SECURITY CODE section.
Once this code is set, a "Z" report will not print until the security code is entered. If a "Z" report is attempted without entering the security code, the prompt "SEC Code" will appear in the display.


PRINTING THE SALES REPORT
IMPORTANT: Once a "Z" reading is taken, it cannot be duplicated, so be sure to have plenty of paper in the register.
1. Set the Control Switch to either the "X" or "Z" position.
2. Press the [amt tend/TOTAL] key.
NOTE: If a security code has been assigned, be sure to enter the security code before pressing the [amt tend/TOTAL]
key.
TO CLEAR THE GRAND TOTAL:
1. Set the Control Switch to the "prg" (Program Mode) position.
2. Type [2], type [0], then press [RA].
After this operation, the grand total resets to zero.

Oct 21, 2011 | Royal 435dx Electronic Cash Register

1 Answer

Casio 240CR how can I make reset at the end of the day. Can I make my own sale amount at the end of the day ? Thanks for helping


Turn the key to Z mode. Press CASH. that will reset and print a report. Not sure what you mean by your own amount. the report will show the sales that happened that day. Remember, the first report will have large figures if you have never reset it before but then it will be correct on the next report.
----------------------------------------------------
If anyone needs more information, the casio 240CR user and programming manual is here: http://the-checkout-tech.com/manuals/cashregisters/Casio_240CR_operators_manual.html

Sep 04, 2011 | Casio Parts Cash Register PC Desktop

2 Answers

Casio PCR-T470 Register


Hi.
Did you program this machine from scratch, or has a dealer setup the system area of programming for you? What I'm asking is has it ever printed a logo?

At the end of each day, you turn the key to Z mode, and press CASH. The machine will print a daily report, then clear only the sales memory ready for the next day. It will not affect any programming.

Mark

Mar 14, 2009 | Casio Parts Cash Register PC Desktop

1 Answer

Casio 101cr.i need a users manual.


Hi. These registers are about the most basic you can get, so they can't do a daily and monthly total.

Basically it works like this:

The machine doesn't care when you do your reports. It will just total up until it gets reset by someone. If you want a monthly, just do your reports each month. However, this means you can't do a daily.

If you turn to X mode and press CASH, you get the total so far (since you last did a Z report).
If you do the same in Z mode, it will give the report, then reset the report to zero.

If you want to see daily and monthly, you can do an X at the end of each day which will show that day and the previous days together. you will need to subtract the other days to find out what todays takings are. Then at the end of month, do a Z and that will reset you for the next month.

Otherwise, if you are interested in monthly only, then just do a Z at the end of each month.

So, what I'm saying is the machine doesn't care how many times you do an X report. It will just show you how you are doing so far, but you must do a Z report when you want it to reset everything. If you want to check if the Z report worked, just wait for the report to print, then press CASH again straight after, and you should see the figures have gone.

I hope this makes sense. If you need more advice, just ask.

Mark

Oct 08, 2008 | Casio Parts Cash Register PC Desktop

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1654 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...