Question about Akai PT5598HD 55" Rear Projection HDTV-Ready Television

1 Answer

Power light blinks 10 times

No picture light blinks 10 times

Posted by on

  • checkie Oct 20, 2008

    Try to turn on the tv, a short sound heard,timer led blinks for few seconds and off.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Check the power relay and the power supply either or both can be bad

Posted on Sep 17, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: no picture or sounds red light blinks 10 times

The parts you need are two diodes, D6301, D6309, and D6116, Sony part numbers 6-500-567-21 (D6301 and 09) and 8-719-081-97 (D6116), they are located on the G board, and that's located on the left side of the set, as seen from the back.

D6116 is connected to pin 9 of transformer T6101, and D6301 and 09 are in series off of pin 7 of that transformer.


Posted on Jun 14, 2009

  • 125 Answers

SOURCE: I have a 51 in. Sony model kp-51ws520. when I turn

Ck small blue capacitor next to hori output Transistor 2k volts they have been known to go Bad, if its OK replace Both of your STK ICs STK392-110s use 180s Mats has them 1-800-628-1118

Posted on Mar 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony kp-57xbr10w. Red light blinks 10 times . When you turn power on sound comes on . No picture . Then no sound and red light blinks 10 times . Help


Sounds like a highvoltage failure. might be the flyback or focus circuit too. oddly I cant find any useful info about 10 blinks.

Sep 30, 2015 | Sony Projection Televisions

Tip

I have a Mitsubishi WS 65711 When I power on the TV the green light (power...


Most of the Mitsubishi rear projection sets made from about 2000 through 2006 have a self diagnostic check feature. It will indicate if there is a error or not and point you in the direction of your trouble.

Based on the error code I or others can tell you more based on the error code and the EXACT model number of the set.

Here is what you do if it turns on for a few seconds and then the power light goes off.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ON FOR A MOMENT AND GOES OFF.

PRESS AND HOLD “Menu and Input"(or device) buttons on front of tv for at least 5 seconds and then release both together.


Watch for power light to blink in a sequence:

1 blink-then 2 blinks-------no error

2 blink-then 1 blink-------X-ray protection

2 blink-then 2 blink-------SHORT PROTECTION*******

2 blink-then 3 blink---------deflection circuit problem

2 blink-then 4 blink---------vertical circuit problem


******2, then 2 is most common---usually means one of the fuses that protect the Convergence IC or IC’s is blown---set will detect no voltage to convergence IC and shut down.


SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES AND THEN TO GET IT TO REPEAT MORE YOU HAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.


IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM

If someone has one of these codes and needs help let me know.

SD TECH

on Dec 20, 2009 | Projection Televisions

1 Answer

10 blinks Sony rear projection


If your model is a KP57WS520 and the light blinks 10 times thats a fairly common issue and there is a repair kit for that error at the following link it bottom of the page http://tvrepairworld.com/rear_projection_tv_circuit_boards/rca_circuit_boards

Apr 03, 2013 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Led stand by light blinking


No power supply proble Google to Encompass Parts Distribution and type in your model number.

Jun 01, 2010 | Sony KP-46WT520 46" Rear Projection...

1 Answer

I have a 51 in. Sony model kp-51ws520. when I turn tv on I get sound by no picture. Standby light blinks 5 times then shuts off . If I power it back on, sound no picture then standby blinks 10 times after...


Ck small blue capacitor next to hori output Transistor 2k volts they have been known to go Bad, if its OK replace Both of your STK ICs STK392-110s use 180s Mats has them 1-800-628-1118

Mar 23, 2010 | Sony KP-51WS520 51" Rear Projection...

1 Answer

The green light blinkig and does not stop, no picture


Did you try unpluge from the wall, and repluging back after 10 min.
Also run the self diagnosis by pushing the menu and device buttons on the front and let me know the code?

Thanks
K

Apr 23, 2009 | Mitsubishi WS-65909 65" Rear Projection...

Not finding what you are looking for?
Akai PT5598HD 55" Rear Projection HDTV-Ready Television Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

seerads

Level 2 Expert

77 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you an Akai Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...