I can,t turn on my Bluetooth device it not found & keep telling me Please verify thet your Bluetooth device is properly connected and turned on

Hi, Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.


Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.


Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.


Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).


Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.

well make sure that the drivers are properly installed? go into the device manager to see that the proper drivers are there if not do an update if available for those drivers, seek a professional if you do not know how to go about it.

you was torn off your bluetooth, go to control panel> bluetooth device and you can enabled your bluetooth device tthere
or use shortcut key Fn+F3 to turn on or turn off your bluetooth device
i hope this helpful
thank you for using fixya

Make sure that the bluetooth device is turned on and its in "discoverable mode"... if still not works. try to reinstall the bluetooth driver.

download the win7 driver from the hp site for your model and download all of the the 7 drivers just to be safe from hp support

I have had the same problem this might sound bit extreme but it worked after re-installing windows xp (if you have the recorery disks)When laptop starts up hold down "f11"

download the bluetooth drivers on the hp web site support page that should do it

if you have in on your laptop you have to get the software for the bluetooth then you must install it on your laptop then it will be done , if you don't have that CD you can downloaded from the technical support for ACER.pan am

The Acer Aspire 4730 models DO NOT include any bluetooth hardware. The button is there because it shares much of its setup and hardware with the 4930 models which do have bluetooth. So, as the machine tells you, there is no bluetooth device to turn on and off. Check the specs from Acer's website and you will see no mention of bluetooth. You will need to add a bluetooth device. The simplest would be one that plugs into your USB port. Other than that little issue, the 4730 is a very nice notebook for the price.

if you have recently installed anything then that is the cause