Question about Fuji FinePix A345 Digital Camera

1 Answer

Viewing Screen White Out

My ca,era was working fine, no probmes. I hadn't used it in a while. I went to use it one day and the viewing screen is whited out. The people look like ghosts. I can see the outlines, but that's about it. Is this fiaxble? Camera turns on, will take pictures, flashes ok. Pictures are of uneven quality, sometimes blurred.

Viewing screen is just ghost images at best, can't see anything. Cannot see menu. T

I suspect firmware error as camera itself has not been dropped, wet, abused in any way. Is there any help for this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

This seems to be a fault with the CCD of the camera

you will have to make a major repair

Posted on Sep 17, 2008

  • 1 more comment 
  • dewan nafees ahmed Sep 17, 2008

    as per my estimate it will be costly.

    but any how its better to take a repair estimate from the company.




  • dewan nafees ahmed Sep 17, 2008

    also Make sure your White Balance is set to Auto!



  • dewan nafees ahmed Sep 17, 2008

    Blank white - suggests a dislodged connector
    These tend to be at the base of the screen gentle
    massaging and pressure may re establish it.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Accessing pictures on my computer


which viewing program are you using? it helps if you post operating system as well. thanks :)

May 10, 2014 | Digital Cameras

1 Answer

I was using my camera and the viewing screen went blank. The battery is fine, there is power... you can see info on the small view finder but nothing on the screen


hello,
You may have accidentally pressed the DISP button on the back of the camera.
This turn the screen off/on.
Try preesing this button when the camera is on
I believe this button is the up button on the back
Hope this helps

Jan 08, 2011 | Sony Cyber-shot DSC-H5 Digital Camera

1 Answer

Screen does not display image


make the "live view"/"viewing screen" first enable by locating it in your menu or your settings. then after that you can go back from taking picture by using the viewing screen

in regards of viewing the pictures taken, press the display button. keep pressing until the viewing screen appears

Apr 30, 2010 | Canon PowerShot G9 Digital Camera

1 Answer

Screen frozen with an interesting black & white abstract pattern


you are probably in need of a new LCD screen. If you do a lot of cropping and such on camera then you may want to use an A/V cable this will allow you to save your LCD screen and the batteries in the camera will not have to work so hard either.
LCD Screens are about 20 dollars and it is not a super hard job to replace. roughnready_offroad@yahoo,com

Mar 28, 2010 | Kodak EasyShare C743 Digital Camera

1 Answer

White out LCD screen


Try a manual reset. Remove the card and battery...press all the buttons...leave the camera alone for 20 minutes...insert the card and then the battery...turn it on.

Oct 05, 2009 | Kodak EasyShare C713 Digital Camera

1 Answer

Still images have white overcast when viewing pictures.


CCD going bad call sony for repairs FREE they will do it dont worry pls rate me WELL !

Jun 05, 2009 | Sony Cyber-shot DSC-W120 Digital Camera

1 Answer

Viewing screen has lost 90% of clarity.


This needs to be answered by Olympus Customer Service. Their telephone number is 800-622-6372 option 2 and then option 3. They will answer if this can be repaired.

Dec 17, 2008 | Olympus FE-300 Digital Camera

1 Answer

White preview screen after pic taken


Have u tried switching the view from and eyeview(viewfinder) to LCD while viewing pictures. Sometimes we forget it and panic. Hope it helps. Good Luck.

Nov 20, 2008 | Fuji FinePix S7000 Digital Camera

1 Answer

Viewing Screen White Out


Does it still taker pictures and do they come up on the view screen?
Loose internal connector is likely cause or a chip failure
For the first try slapping the base of the camera to try to reconnect.
If no luck replace the camera.

Jun 22, 2008 | Fuji FinePix A345 Digital Camera

1 Answer

Fuji f700


I recently had trouble with the LCD Display coming up with a black screen. So I mailed it to Fuji with a letter explaining the problem. About 3 weeks later I got it back in the mail and it seem to be working fine until a month later. I turned it on and the LCD display show a black screen only now it has white lines. I'm so incredible mad and extremely dissapointed in Fuji. Reading online I have notice many people having trouble with Fuji Products. I WILL NEVER BUY a Fuji again!!!

Jan 15, 2007 | Fuji FinePix F700 Digital Camera

Not finding what you are looking for?
Fuji FinePix A345 Digital Camera Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Digital Cameras Experts

kakima

Level 3 Expert

96627 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Fuji Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...