Nokia 2300 Car symbol is displaying in my screen and my phone doesnt rings even its in loud mode and doesnt vibrates even in silent mode.And other problem is even i unplug my headset from the set,still the headset symbol is showing in the display.What may be the prob and tell me the solution?

Setup the Vibration
This option allows you to set your device to vibrate and ring.
1. From the main Settings page, tap My device tab ?
Sound.
2. Tap Vibrations.
3. Select a vibration pattern and tap OK.
- or -
Tap Create to then use an on-screen touch circle to
create your own custom vibration pattern. Tap Save to
store the new vibration pattern.
Sound Settings
From this menu you can control the sounds on the phone as
well as configure the display settings.
 From the Home screen, press and then tap
Settings ? (My device tab) ? Sound.
The following options display:
Silent mode via Device Options Screen
Silent mode is convenient when you wish to stop the phone
from making noise, in a theater for example. In Silent Mode
the speaker is muted and the phone only vibrates to notify
you of incoming calls, or other functions that normally have a
defined tone or sound as an alert.
1. From the Home screen, press and hold
(Power/End) until the Device options screen displays.
2. Tap either Mute, Vibrate, or Sound from the Device
options screen to activate or deactivate these features
(the current mode displays).
You can download the User manual from the site below

https://support.t-mobile.com/docs/DOC-9140

its like the user profile has changed to silent
All you have to do is....
go to the settings on your mobile phone, scroll to profile and select it, click on general or loud, select personalize,check the incoming alert mode and see if it is set to ringing,scroll down and select a tone for the alert then save. after which activate the edited profile as the profile in use..


hope this helps

• Create new profile or modify existing profile (Don't modify silent)
• Put vibrate mode on and ringing volume 0

i hope your problem solved..

Sorry there is no way to separate the ringing of the handset from the headset, the headset only repeats the ringing that the phone handset sends..

So you having problem with vibrate capability?

Try this:
1. Make sure your phone not in charging (it won't vibrate for several phone like e.g. NOKIA)
2. Have you dropped it? If yes, immediately contact the customer service.

Hope this will help! PM me if there's any questions =]

I had the same problem - on the left hand side of the phone (not the screen) if there is a red dot showing you have switched your phone to silent. Click the switch and your phone will ring

I have the same phone, when you close it with the camera facing you you will see the two buttons on the left side. One is long (on top) and the small one is on the bottom, or under neath it. You press the long putton which is above and you should see the word STYLE: followed by either "Silent" " Vibrate" "Loud" etc. Once you have pressed the skinny long button on the left side and the screen says STYLE: silent then you press the little button below it once, then press it again, etc it cycles through the different ringing modes like silent, vibrate, vibrate then ring, soft, and loud. You press it until you see a setting you like and then press the long skinny button on top to set it. I keep mine on Loud. I hope this helps.

You can change the settings of the selected active profile.
Select Menu > Settings > Tones > Incoming call alert, Ringing tone,
Ringing volume, Vibrating alert, Push to talk settings, Message alert
tone, Instant msg. alert tone, Keypad tones, or Warning tones. You can
find the same settings in the Profiles menu.

you can actually move the button , on the top left hand side of your iphone, over the ringer volume, you will see a red or orange dot, this means the switch has you iphone in silent mode, I was stuck on this, until I found it is a actual switch, look at it closely, you can move it. So where you see the red dot, put your finger on it and move it the opposite way, and I do not mean press the button, I mean, flip the switch on it, then your phone will not be in silent mode anymore,,, this was very annoying, I hope it helps anyone that has the same problem.
cheers!

The phone is in "vibe then ring" mode.

Go to tools then ring styles using the "-" at the top center of the keypad. It will be set to vibe then ring, press "change" alter the style to vibe, vibe then ring, silent, loud or whatever you like. That is also where you find what ringtone is used for the ring.