Difficulty with locating computer format for mp3 player

MP3 players can only play music files in mp3 file format.You can download mp3 music files from the Internet toyour computer and then copy them to your MP3 player using the USB cable.For your CD collection, you need to convert your CDs tomp3 music files onto your computer or download them from the Internet and thencopy them to your MP3 player after you have connected the USB cable tothe MP3 player and the computer.
You can do this using Windows Media player and Rip the CDs - Media Player willcreate a MP3 music file for each music track.Click on this link for instruction on converting musicfiles to mp3 file format :- http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

I'm sorry that the Network Player is displaying the error message. Usually, the error message appears if you use the Computer to format the player. In order to resolve the issue, please format the player using the format option from the Menu items on the Player.

Please follow the below steps to format the player using the Menu options.



If the issue persists, service may be required. Please click hear to locate your nearest service facility:

Thanks for understanding. Please let me know if you require further assistance.

Connect to computer.
Right Click on my computer. Select Manage.
Select Disk Management.
Right click on the Mp3 Player.
Select Format.
Format the Drive.
Once you complete the format process,
Disconnect mp3 player.
Reconnect player.
You can now add all the new songs you want.

Hi, To reset the Fuze, slide the power switch up all the way and hold it there for fifteen seconds.

Also, i formatted mines by going to my computer then right clicking the disc my mp3 player was signaled as and i let it format and it cleaned out my memory but it works again this is advice for any1 with difficulties.

Hope that helped..

i had the same mp3 it will erase every thing on the mp3 but it is the only way i got mine towork

Hi,

formatting a clippers mp3 player and not having a display screen is not that difficulty to access, you will need to connect it with a laptop or a desktop computer to be able to remove what ever data you want to access in the mp3 player.

Get a cable that will work with your mp3 and connect to the PC you want to use.Click on my computer you will see and icon of your mp3 on that page,double click to get access into it highlight any data you see inside and delete all.

But make sure you have the software for the mp3 player for the mp3 to work properly with your system.

Good luck.

Use the player to do the format. If you use the computer's operating system to format the Gogear you may delete critical files for the device or change the file system so the device cannot communicate with it's memory. If you are having difficulty communicating with the device it could be a driver or software issue. Make sure the device's drivers are installed and up to date. Make sure you have the proper software for the device installed. You could also try and update the firmaware of the device. These updates will be available from the Phillips website.

There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but it will be "good as new" after that.

The following procedures will erase all songs on the player.
To erase from the computer:
Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, click my computer, right click on icon of mp3 player and select format.
You can also format the player in Windows Media Player itself.
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

I don't know if this will help but you can try this:

If you can, open your mp3 player and go to settings. Under the USB menu change it to MSC.

If you can't don't worry, but either way try this:

Plug in the mp3 player to the computer. Open the My Computer on your desktop, right click on the Sansa mp3 player and click Format. Make sure Fat32 is checked and Quick format is UNchecked. Then format the mp3 player. After that it should be clean and work just like a USB drive.

Songs are in the wrong format