Question about Microsoft Xbox 360 Console

1 Answer

X box 360

My drive has gone down nothing wrong with the lazer it is something to do with the baurd under the drive any ideas please

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Http://store.richspsxparts.com/imnooninxb36.html

you need a part check this website they will explain also

Posted on Sep 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

As soon as I turn on my Xbox 360, it tells me to open and close it over and over again. I sign myself in and it still does not work. This Xbox 360 worked fine yesterday, but it has started to become a...


It sounds like your DVD drive's lazer has stopped working. Try buying a DVD head cleaner from any local computer repair shop and running that through your Xbox 360. This often solves this problem, but if not, you will need to contact Microsoft to come and repair your console. Hopefully you still have a warranty on it.

Apr 12, 2011 | Microsoft Xbox 360 Console

1 Answer

Evey time i but in a umd it comes on and then says disk can not be read


It could be many things is the can be a bad lazer, disc rotating motor is stuck, or bad motherboard in a worst case scenario. You can check if your lazer and your disc rotating motor is working if you open your umd slot with the psp on and with a small toothpick there is a black tab that sticks up, this tells the PSP that there is a UMD in the drive If you press this down, you should see the disc motor spin and the laser light up red. If they are in working order then it could be something wrong with some of the other hardware in the psp itself. (Caution: Do not stare directly at lazer) If one of the motor (Lazer or Disk rotating motor) are twitching or trying to move there could be some dust in the gear preventing it from turning you can try getting a needle and try to move the gear manually. If this does not work your most likely going to need to send it in for repair. Hope this helps please rate thanks!

Feb 26, 2011 | Sony PlayStation Portable (PSP) Console

1 Answer

I have an xbox 360 and i have the three red lights error and the secondary code is 0020. i have done the x-clamp fix. and i know i am doing something wrong in this fix please please help me.


0020 is open connection under the G.P.U. 90% of the time.
If you removed the heatsink studs and the x clamp then screw down
the G.P.U.'s heat sink followed by a forced over heating of the G.P.U.

Then you did nothing wrong as far as the stander procedure goes.

The connections under the G.P.U. have to much gaping to be
compressed back the pads.

Your second option is to have the G.P.U. re flowed with
proper clamping to insure it stays connected .
This will give the longest lasting repair .

The x-clamp mod repair last 1-3 months on average
and it will warp the board under the G.P.U. and
becomes very difficult to repair after that .

Just something to think about.
if you have any questions feel free to ask

Rob

Aug 30, 2010 | Microsoft Xbox 360 Console

3 Answers

My 360 scratched a ring on one of my new games any idea what would be wrong with it? im guessing the hard drive needs to be replaced.


It depends. Did you move the console at all while a disc was in the tray, even if it was powered off? If so, that's the cause. Another thing to try is laying the console Horizontally instead of standing up (Which is bad for your 360 anyways). If that doesn't solve your issues contact Microsoft.

Jan 02, 2010 | Microsoft Xbox 360 Console

1 Answer

Xbox 360 red rings freezing


the red ring of death means you have a bricked XBOX.
something has gone wrong with the hardware inside, and you need to take it back to the shop you purchased it from, so they can replace it under warranty.this is not an unusual problem to encounter, but unfortunately, can only be repaired by qualified repair specialists. the best they can do for you, is either swap out the hardware and give you a new box, or they send yours away and you wait the 4-6 weeks for it to be repaired and sent back..

Sep 28, 2009 | Microsoft Xbox 360 Console

1 Answer

Well it won't read any disc and the tray keeps opening and closeing


Does it say it keeps opening and closing or does it literally open and close if so its probably something wrong the motor acting or somthing inside of the disc drive if thats the case then i'm sorry to say but you might have to get a new disc drive. If your 360 is under warranty send it into microsoft if its not under warranty go online and find a disc drive but make sure its the same one you have currently inside of your 360.

Have you ever had to replace that disc drive before or no?
if so then your disc drive is the wrong one for that 360

Jul 01, 2009 | Microsoft Xbox 360 Console

2 Answers

Xbox not reading disc properly.


This could mean your disc is corrupt, or something is wrong with your drives lense. Call XBOX customer support and they'll help you fix it. 1-800-4MY-XBOX

Jan 11, 2008 | Microsoft Xbox 360 Console

1 Answer

Xbox 360


Try turning the xbox on and pressing the TV/Video button on the tv or remote a few times and see if the picture comes up.

Sep 15, 2007 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles Experts

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Are you a Microsoft Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...