Question about HP Color LaserJet 2600n Printer

2 Answers

My hp color laserjet 2600n giving 50.2 fuser error. what should i do?

My 2600n giving 50.2 fuser error. when i off and strart it after some time. it becomes good but in cilibrating it gives the same problum. now it is in waranty. what should i do?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi Everyone

i had the same problem and resolved it without replacing the fuser.
i have tried what hp have suggusted the leaving it off for 25 min ect.
if you remove the cable fuser controller cable and plu it back it and just try it again it resets everyting and the printers starts working again.
http://95.80.99.34:3080/Hewlett-Packard/sm%20color%20lj%202600n.pdf

if you do the procedure on page 75 and section 5. and try again it should work. it worked for me , its such a good printer i would hate to see it go i am sure it the same case with you. good luck

Nav

PC Restore uk

Posted on Aug 03, 2012

  • Nav Mahmood Aug 03, 2012


    Hi Everyone

    i had the same problem and resolved it without replacing the fuser.
    i have tried what hp have suggusted the leaving it off for 25 min ect.
    if you remove the cable fuser controller cable and plu it back it and just try it again it resets everyting and the printers starts working again.
    http://95.80.99.34:3080/Hewlett-Packard/...

    if you do the procedure on page 75 and section 5. and try again it should work. it worked for me , its such a good printer i would hate to see it go i am sure it the same case with you. good luck

    Nav

    PC Restore uk

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

50.1 Fuser Error Turn off then on Error message50.1 Fuser Error Turn off then on Description50.1 Low fuser temperature error. The device has experienced an internal hardware error. Action

  1. Turn off the device, wait at least 25 minutes, and then turn on the device.
  2. If a surge protector is being used,remove it. Plug the device directly into the wall socket. Use the powerswitch to turn on the device.
  3. If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.

Posted on Sep 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Laserjet m602 fuser error 50.22.11


Fuser is not heating. Reseat the fuser, if that does not resolve the issue you will need to replace the fuser.

Jan 18, 2014 | HP Color LaserJet 2600n Printer

1 Answer

50.9 fuser error


Couldn't find any listing for a 50.9 error.
However, all the other 50.x errors, which are fuser errors want you to:-

1. turn printer off for at least 25 minutes, and then turn it on. If you still have the error
2. make sure that you are not using a surge protector. Plug directly into wall outlet.
3. Replace the fuser

Jan 10, 2011 | HP Color LaserJet 2600n Printer

1 Answer

Hp color laserjet printer 2650dn error 50.2 who to


This is a fuser error. Probably over heating. Try leaving the unit unplugged for one night and try again. If is not working the fuser is defective or depleted and need to be replaced. If the unit is in good shape contact a service center otherwise its better to get a new unit

Sep 02, 2010 | HP Color LaserJet 2600n Printer

1 Answer

HP 2600n


50.2 Fuser Error Turn off then on Description 50.2 Slow fuser error. The device has experienced an internal hardware error. Action
  1. Turn off the device, wait at least 25 minutes, and then turn on the device.
  2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn on the device.
if no result,
Fix this with a new FUSER Assembly for HP Colour Laserjet 2600/n (200/240v) Part Number: RM1-1821-240CN or Fusing Assembly – RM1-1820(110/120v )

Oct 05, 2009 | HP Color LaserJet 2600n Printer

2 Answers

Hp 2605n Fuser error 50.7


50.7 means that the photo sensor ps6 detected no movement
Open the side of the printer power on the printer and check if the fuser motor moves forward and back. If it does the problem is with the movement sensor or feedback circuitry. If it doesn't its the motor, gear system jamming, motor driver or power supply pcb.

Aug 11, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Hp color laserjet 2600n giving "10.0000 suply error"


10.00 error is for the black cartridge. Check the cartridge locker for the black toner cartridge on the right side, is it different from the other? does it moves correctly? check properly. If the locker seems correct, try clean the contacts on toner and opposite HV pins in printer

Nov 27, 2008 | HP Color LaserJet 2600n Printer

2 Answers

Fuser Error 50.1 Fuser is hot. What is a fuser?


error 50 means your fuser assembly has gone bad or its not getting power to be functional. you need to replace the fuser unit.

Aug 17, 2008 | HP Color LaserJet 2600n Printer

3 Answers

Printer HP ColorLaserJet displays Fuser Error


My HP Color Laserjet 2600n Printer is giving me error as

" 50.2 Fuser error " . then every time i have to reatart my printer.
please give me suggestion.

thanks and regards.

ajinmumbai

Dec 05, 2007 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

926 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...