Question about Proview HX303 30 in. HD-Ready LCD Television

2 Answers

Proview 3200 Flatscreen with HDMI Problem

Hi - I have a Proview Flatscreen TV (about 3 yrs old) and use AT&T U-Verse (fiber optic cable tv) through the HDMI source on my TV. When I turn the TV on, and select HDMI mode there is 0hz, when it is usually 60hz (at least). So, all I get is a blank screen and instead of accessing my cable box, so that I can watch tv, any help would be greatly appreciated!

Posted by on

  • Anonymous Mar 29, 2014

    40 inch flatscreen debug on cable not DVD player when on just cable att u verse . This problem started 30 days ago

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having the same problem but I don't have a manual and proview is out of business

Posted on Mar 18, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 223 Answers

Maybe the input on the tv needs to be adjusted to work with the cable tv for example in the tv menu where you can adjust the sources for the inputs maybe it is set to something like RGB instead of HDMI. If you have a user manual consult it on how to change the input devices. Good luck.

Posted on Oct 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a spectronics tv....get a no signal across the screen...HDMI cable connecting tv to cable box U-verse. Happening more frequently now


Does this do the same thing on say a DVD player? could be your HDMI cable, your U-verse box & lastly the Main-I/O PCB. I'm thinking the most likely issue is with U-verse.

Jul 21, 2014 | Flat Panel Televisions

1 Answer

Connect Sound Bar to TV (flatscreen - Proscan)


How about fiber optic cable or composite cables. I usually recommemd that people do either of these.

Jun 04, 2014 | Proscan Flat Panel Televisions

1 Answer

Where is output from tv for optic fiber cable


Hi , You need a converter to go from Optic to HDMI connector.

Dec 23, 2013 | Sanyo 42 in. LCD TV

1 Answer

HI, i have a white screen on this tv. it,s out of warranty being about 3 years old , one day it suddenly went white completely . opened it up to replace the inverter board , but did not cure it . when i...


No.This tv problem it is not a grounding earth problems.It is a loose connections Fiber Optic cables pins connections contact problems on that board some where,on those Fiber Optic cables on that board those pins connections are not made tightly between them on that area on that board,where it is loose,some where u put pressure on it inwards.Why don't u take all the Fiber Optic cables aparts and take long noise plier bents all the connections pins a little bit.Than re connections all the Fiber Optic cables again on that area should solve this problems.

Sep 22, 2011 | Sony KDF-E55A20 55 in. LCD Television

1 Answer

I have a 32 inch 3200 model proview tv and it went black screen turns on and off what could be wrong or do i need a new tv


1: be sure that you have selected the correct input on your tv, there should be a button on the remote saying "input" or "source" 2: be sure the source is turned on and that the wires coming from the source are in the "output" receptacles and that on the tv they are on "input" receptacles. 3: it may be possible that one input is damaged or malfuncioning, try switching to a different input (example: from "Video 1 to Video 2, or HDMI 1 to HDMI 2). check the contrast settings on your tv, it may be set so dark that you cannot see well

Aug 12, 2010 | Proview Flat Panel Televisions

1 Answer

I have Samsung 360 Series 3 LCD using Fiber audio cable directly from cable box to television...not getting audio...checked all cable box settings...unsure...Do have alternatives in house to test box and...


As I see it this TV has no optical digital audio input. The connection on the rear of the set is "Digital Audio Out (Optical)", not in. I think you need to run a HDMI cable from the cable box to the TV to get digital audio.

Nov 05, 2009 | Samsung LN32B360 32 in. LCD HDTV

1 Answer

Proview tv... 1080p????


if it has either hdmi out,,or comonent out,,then yes,,probly 1080p,,or at least 720p,,thats good

May 17, 2009 | Flat Panel Televisions

2 Answers

Need hook up diagram for Samsung HDTV using HDMI with Cable box and Samsung 5.1 Surround Theater System


you can run a fiber optic cable out of the tv into the surround system if the sytem has a fiber optic input, or your tv should at least have red and white rca cables for audio out, then you just pick any input on the surround sound and any audio from dvd players ect thats hooked up to the tv will be sent through that one input on the surround sound. The only thing you'll have to do is turn the volume up or down on your sound system.

Jul 09, 2008 | Flat Panel Televisions

1 Answer

PROVIEW 19" LCD TV - FLATSCREEN - KV SERIES


I have same problem, im goin to try this fix i found on youtube.. different tv but same problem

http://www.youtube.com/watch?v=_0175VbmV9M&feature=channel

Jan 08, 2008 | Proview HV-207 20 in. HD-Ready LCD...

Not finding what you are looking for?
Proview HX303 30 in. HD-Ready LCD Television Logo

625 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Flat Panel Televisions Experts

Paul

Level 2 Expert

223 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Proview Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...