Question about Canon PIXMA IP5200 InkJet Photo Printer
How to RESET the Error code “6502” for CANON ip4300 ?
1, With the printer unplug, remove the ink cart to the right ,
2,Plug in the printer ,Press the POWER button, Do not release the POWERbutton ,and then press the RESUME button twice in succession .Nowrelease the POWER button ,press the RESUME button 4 times .
3,The beeper may sound once ,Then With the printer unplug ,afterthat reset the printer electronics ,open the printer and this processis finished.
Posted on Sep 17, 2008
SOURCE: error code
hi peepz,Just to share CANON MP800 Error CODE 6502:I have been using INKRIS.com CISS system for years now until this stupid problem came up.to further clarify,
1)Lift the Lid.
2)switch off the printer by pulling out the plug.
3)then shift the ink cartS to the right.
4)close lid,plug in power.
5)HOLD DOWN power button then press STOP/RESET button twice.
6)Then press STOP?reset button 4 times.
7)the screen on MP800 will go white.with SPF test mode Idel written on it.
8)then power off and power on again.
THANKS for SAVING MY PRINTER!
Posted on May 19, 2008
CANON PIXMA IX IP 4000 - error 5100 and error 6502
While testing the printer the cover must be closed!
So if you have a CISS in your printer you have to close the cover after replacinq cartridge because after that
replacinq the printer is testinq the cartridges also with the blinkinq LEDS which are installed on the ink's!
There is a light LED sensor under the cover which detects the blinking.
So if you have destroyed the LED on chips or if you covered them with glue OR if you will leave the cover opened
and press cover-open detection button with a pen (then the day ambient light will come inside to cover)
you will get an error 6502 or error 5100. I think that the same error will come with all printers which use
CLI8 CLI-8 cartridges.
Remebre that the blinking led have to be clean and blink after installing new cartidge.
Other reason is that you mixed the chips ang give i.e. chip from yellow to blue and blue to i.e.red. and black to yello etc etc. (YOU MIXED THEM :) )
I hope it will help
Posted on Jun 16, 2008
THANK YOU VERY MUCH FOR THE HELP. THE CANON PIXMA iP1000 SEEMS TO BE WORKING WELL. LET'S SEE HOW LONG.
GREAT FixYA Saves me from too much worrying. I have 8 printers inside the office: Canon 4, Epson1 HP 2 and 4 computers and 5 scanners.
Thank you for the email reminding me if I need help.
This is documentations time in CAFAG, Inc.
The Executive Officer - Lydia
Posted on Oct 05, 2008
SOURCE: canon pixma ip4700
This error generally means that your cartridge chips cannot be recognized. The primary causes are: Covering of the LED at the back of the chip (by ink?). Incorrect chip positioning on the cartridge.The LED on one or more of the cartridges has been damaged if removed from original cartridge.The Chips have been mixed up, if removed and replaced, the wrong Chip has gone on the wrong color. And lastly Ink is covering the cartridge chip or a sensitive area of the cartridge and preventing the LED light sensor from functioning. ( my problem)
Posted on Feb 08, 2010
Tips for a great answer:
Jan 15, 2010 | Canon iP3500 Photo Printer
Oct 31, 2009 | Canon PIXMA MP830 All-In-One InkJet...
Sep 25, 2009 | Canon PIXMA MP830 All-In-One InkJet...
Jun 07, 2009 | Canon PIXMA MP530 All-In-One InkJet...
May 05, 2009 | Canon PIXMA MP600 all-In-One InkJet...
Dec 23, 2008 | Canon PIXMA MP600 all-In-One InkJet...
Jun 14, 2008 | Canon Pixma MP500 All-In-One InkJet...
Feb 17, 2008 | Canon PIXMA MP600 all-In-One InkJet...
569 people viewed this question
Usually answered in minutes!